UCE211047ADual Mode UMTS / GSM Cellular Mobile Radio with Bluetooth, WLAN and RFID

<      < performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 0.335 W/kg, and when worn on the body in a holder or carry case, is 0.576 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0 cm separation distance between the user's body and the handset. The use of beltclips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/ after searching on FCC ID UCE211047A. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) website at http://www.phonefacts.net. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested at the ear was 0.441 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body as described in this guide**. In this case, the highest tested SAR value is 0.730 W/kg. As SAR is measured utilizing the devices highest transmitting < First Step Guide Package Contents Handset (102P)* 1 AC Charger (PMCBD1) AC Adapter USIM Card Eject Tool* 2 (Japanese) (Japanese) (Japanese) [102P, AC Charger] *1 102P has an internal battery. *2 Complimentary sample *3 Use for barcode masking. Put it on barcode at bottom of handset without covering Mic. It is not restickable. When removing sticker attached to handset, take care to avoid injuries. •SoftBank 102P is compatible with both 3G and GSM network technologies. •Use SoftBank specified Charger; internal battery may leak, overheat, explode or ignite otherwise. •Do not dispose of handset as ordinary refuse. Take it to a SoftBank Shop. Comply with local waste disposal/recycling regulations. Micro USB Cable (USB Charger) Handset Keys Basic Operations Handset Power On/Off Power On Press for 2+ seconds Power Off Press for Phone options  [Power off]  [OK] English Interface In Home Screen,  [ ]  [ ]  [ ]  [English] My Number In Home Screen,  [Settings]  [About phone]  [Status] Making Calls In Home Screen, [Phone]  Enter number  / Increase/decrease volume power the actual SAR of this device while operating is typically below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses the minimum level required to reach the network. The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head and body. * The tests are carried out in accordance with international guidelines for testing. ** Please see Electromagnetic Waves for important notes regarding body worn operation. Declaration of Conformity We, Panasonic Mobile Communications Development of Europe Ltd., declare that SoftBank 102P conforms with the essential and other relevant requirements of the directive 1999/5/EC. A declaration of conformity to this effect can be found at http://panasonic.net/pmc/support/index.html • This product is only intended for sale in Japan. Concerning European Economic Area: The use of Wi-Fi is restricted to only indoor use in France. < Open Options menu Home Screen Long Press for recent applications Go Back/Escape Power on/Phone options Toggle Sleep mode on/off Barcode Mask Sticker* 2 * 3 General Notes Handling Precautions • Before using Wi-Fi/Bluetooth ® abroad, confirm local laws/ regulations regarding Wi-Fi/Bluetooth ® use. •Excessive sound volume can impair hearing. • Confirm application security/safety beforehand; install at your own risk. Viruses may infect handset or corrupt data; may cause excessive sound volume. Electromagnetic Waves • For body worn operation, this mobile phone has been tested and meets RF exposure guidelines when used with an accessory containing no metal and positioning the handset a minimum 10 mm from the body. Use of other accessories may not ensure compliance with RF exposure guidelines. FCC Notice • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. T…

Text truncated - open the document above for the full version.

Panasonic Mobile Communications Development of Europe limited Willoughby Road, Bracknell, Berkshire, RG12 8FP Tel: +44 (0) 1344 862444 Fax: +44 (0) 1344 706796 VAT Reg No. GB787451290 Web: http:Panasonic.net/pmc Registered in England No. 4188880 Panasonic Mobile Communications Development of Europe Limited 9 th February 2012 Telecommunication Certification Body RFI Global Services Ltd. Pavilion A Ashwood Park Basingstoke Hampshire RG23 8BG United Kingdom Subject: Certification Application FCC ID: UCE211047A It is requested that the following information is held Confidential on behalf of Panasonic Mobile Communications Development of Europe Ltd., on the confidentiality basis outlined below: 1. Permanent Confidentiality (FCC Rules Part 0.459 refers). Exhibit Category Exhibit Filenames Schematic Diagrams 102P_Schematic_Drawings.pdf Parts list (BOM) BOM.pdf Block Diagrams 102P_RF_block_diagram.pdf 102P_BT_WLAN Block Diagram.pdf 102P_RFID_FeliCa_ Block Diagram.pdf Operational Descriptions * 102P_Production specification_v1.0.pdf 102P_WLAN_BT Operational Description.pdf 102P_FeliCa _RF-ID_ Operational Description.pdf Tune up Information 102P_Complete_Unit_Test_Spec.pdf 102P WLAN Tune up information.pdf Panasonic Mobile Communications Development of Europe limited Willoughby Road, Bracknell, Berkshire, RG12 8FP Tel: +44 (0) 1344 862444 Fax: +44 (0) 1344 706796 VAT Reg No. GB787451290 Web: http:Panasonic.net/pmc Registered in England No. 4188880 Panasonic Mobile Communications Development of Europe Limited The information on the previous page contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjust benefits to its competitors. The applicant understands that pursuant to rule 0.457d, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. * The Operational Descriptions contain proprietary information relating to the device implementation used. This information is not customarily released to the public. 2. Short Term Confidentiality until 6 th August 2012 Requested Exhibit Category Exhibit Filenames User manual 102P_ENG_120130.pdf Test set-up photographs Test Set Up 1.pdf RFI-SAR-RP85037JD03A V1.0 - Part 3.pdf Internal photographs 102P_Internal Photographs.pdf External photographs 102P_External Photographs.pdf The above documents contain proprietary information relating the Industrial Design of the product, which has not yet been released, to the market. The public disclosure of this information prior to market launch may be harmful to the applicant and provide unjust benefits to its competitors. A period up to 6 th August 2012 is requested to protect this information before formal market launch. If the launch date is re-scheduled to be earlier than 6 th August 2012 we will inform again to cancel this restriction. Yours faithfully, Andrew James Regulatory Specialist

■ ■ 102P 102P _FCCID Location FCCID _FCCID Location FCCID ： ： UCE211047A (Rear View) <Top> <Bottom> Production Company Name Product/Trade Name

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: SoftBank, EB-3236 To: OET Bulletin 65 Supplement C: (2001-01) Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 This Test Report Is Issued Under The Authority Of Chris Guy, Head of Global Approvals: (APPROVED SIGNATORY) Checked By: Richelieu Quoi (APPROVED SIGNATORY) Issue Date: 25 January 2012 Test Dates: 5 January to 21 January 2012 This report is issued in portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by RFI Global Services Ltd. is under license. Other trademarks and trade names are those of their respective owners. Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 2 of 134 RFI Global Services Ltd. This page has been left intentionally blank. Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 3 of 134 RFI Global Services Ltd. TABLE OF CONTENTS 1. Customer Information ...................................................................................................... 4 2. Equipment Under Test (EUT) ........................................................................................... 5 3. Test Specification, Methods and Procedures ................................................................ 9 4. Deviations from the Test Specification ......................................................................... 10 5. Operation and Configuration of the EUT during Testing ............................................ 11 6. Summary of Test Results ............................................................................................... 13 7. Measurements, Examinations and Derived Results .................................................... 15 8. Measurement Uncertainty .............................................................................................. 33 Appendix 2. Measurement Methods .................................................................................. 43 Appendix 3. SAR Distribution Scans ................................................................................ 45 Appendix 4. Photographs ................................................................................................ 100 Appendix 5. Validation of System ................................................................................... 127 Appendix 6. Simulated Tissues ....................................................................................... 131 Appendix 7. DASY4 System Details ................................................................................ 132 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 4 of 134 RFI Global Services Ltd. 1. Customer Information Company Name: Panasonic Mobile Comms Dev of Europe Ltd Address: Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP, United Kingdom Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 5 of 134 RFI Global Services Ltd. 2. Equipment Under Test (EUT) 2.1. Identification of Equipment Under Test (EUT) Description: Mobile Handset Brand Name: SoftBank Model Name or Number: EB-3236 Serial Number: None Stated (Customer Reference C26) IMEI Number: 004401221182153 Hardware Version Number: Rev C Software Version Number: ACPU:sbm-07-0192 CCPU:R1B_1_EC02_01_S02 Hardware Revision of GSM Module: Not Applicable Software Revision of GSM Module: Not Applicable FCC ID Number: UCE211047A Country of Manufacture: Japan Date of Receipt: 05 January 2012 Note(s): This sample was used to perform 2G and WLAN SAR evaluations only. The sample supports simultaneous transmission with the WWAN and WLAN antenna > 5 cm apart. Wireless Personal Hotspot is also supported and was evaluated as per KDB 941225 D06 "Hot Spot SAR v01" Description: Mobile Handset Brand Name: SoftBank Model Name or Number: EB-3236 Serial Number: None Stated (Customer Reference C22) IMEI Number: 004401221182138 Hardware Version Number: Rev C Software Version Number: ACPU:sbm-07-0192 CCPU:R1B_1_EC02_01_S02 Hardware Revision of GSM Module: Not Applicable Software Revision of GSM Module: Not Applicable FCC ID Number: UCE211047A Country of Manufacture: Japan Date of Receipt: 05 January 2012 Note(s): This sample was used to perform 2G and WLAN conducted power measurements evaluation only. The sample supports simultaneous transmission with the WWAN and WLAN antenna > 5 cm apart. Wireless Personal Hotspot is also supported and was evaluated as per KDB 941225 D06 "Hot Spot SAR v01" Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 6 of 134 RFI Global Services Ltd. 2.2. Description of EUT The equipment under test was a Dual-Band GSM mobile handset operating in the GSM850, PCS1900 and Wi-Fi 2450 bands. The EUT has GPRS class 12, WiFi802.11b/g/n, Wireless Personal Hotspot Mode, Bluetooth and RFID capabilities. 2.3. Modifications Incorporated in the EUT EUT (IMEI: 004401221182153) was used to perform 2G and WLAN SAR evaluations only. EUT (IMEI: 004401221182138) was used for perform 2G and WLAN conducted power measurements only. Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 7 of 134 RFI Global Services Ltd. 2.4. Accessories The following accessories were supplied with the EUT during testing: Description: Personal Hands-Free (PHF) Brand Name: Panasonic Model Name or Number: None Stated Serial Number: None Stated Cable Length and Type: ~1.15m Country of Manufacture: None State…

Text truncated - open the document above for the full version.

Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 45 of 134 RFI Global Services Ltd. Appendix 3. SAR Distribution Scans This appendix contains SAR distribution scans which are not included in the total number of pages for this report. Scan Reference Number Title SCN/85037JD03/001 Touch Left GSM CH189 SCN/85037JD03/002 Tilt Left GSM CH189 SCN/85037JD03/003 Touch Right GSM CH189 SCN/85037JD03/004 Tilt Right GSM CH189 SCN/85037JD03/005 Touch Right GPRS CH189 SCN/85037JD03/006 Touch Right EGPRS CH189 SCN/85037JD03/007 Front of EUT Facing Phantom Hotspot Mode GPRS CH189 SCN/85037JD03/008 Rear of EUT Facing Phantom Hotspot Mode GPRS CH189 SCN/85037JD03/009 Left Hand Side of EUT Facing Phantom Hotspot Mode GPRS CH189 SCN/85037JD03/010 Right Hand Side of EUT Facing Phantom Hotspot Mode GPRS CH189 SCN/85037JD03/011 Bottom of EUT Facing Phantom Hotspot Mode GPRS CH189- SCN/85037JD03/012 Rear of EUT Facing Phantom Hotspot Mode EGPRS CH189 SCN/85037JD03/013 Rear of EUT Facing Phantom Hotspot Mode GSM CH189 SCN/85037JD03/014 Rear of EUT Facing Phantom Hotspot Mode with PHF GPRS CH189 SCN/85037JD03/015 Touch Left PCS CH660 SCN/85037JD03/016 Tilt Left PCS CH660 SCN/85037JD03/017 Touch Right PCS CH660 SCN/85037JD03/018 Tilt Right PCS CH660 SCN/85037JD03/019 Touch Right GPRS CH660 SCN/85037JD03/020 Touch Right EGPRS CH660 SCN/85037JD03/021 Front of EUT Facing Phantom Hotspot Mode GPRS CH660 SCN/85037JD03/022 Rear of EUT Facing Phantom Hotspot Mode GPRS CH660 SCN/85037JD03/023 Left Hand Side of EUT Facing Phantom Hotspot Mode GPRS CH660 SCN/85037JD03/024 Right Hand Side of EUT Facing Phantom Hotspot Mode GPRS CH660 SCN/85037JD03/025 Bottom of EUT Facing Phantom Hotspot Mode GPRS CH660 SCN/85037JD03/026 Rear of EUT Facing Phantom Hotspot Mode EGPRS CH660 SCN/85037JD03/027 Rear of EUT Facing Phantom Hotspot Mode PCS CH660 SCN/85037JD03/028 Rear of EUT Facing Phantom With PHF Hotspot Mode GPRS CH660 SCN/85037JD03/029 Touch Left WLAN 802.11b 1Mbps CH6 SCN/85037JD03/030 Tilt Left WLAN 802.11b 1Mbps CH6 SCN/85037JD03/031 Touch Right WLAN 802.11b 1Mbps CH6 SCN/85037JD03/032 Tilt Right WLAN 802.11b 1Mbps CH6 SCN/85037JD03/033 Tilt Right WLAN 802.11g 6Mbps CH6 SCN/85037JD03/034 Tilt Right WLAN 802.11n 6.5Mbps CH6 SCN/85037JD03/035 Front of EUT Facing Phantom Hotspot Mode WLAN 802.11b 1 Mbps CH6 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 46 of 134 RFI Global Services Ltd. SCN/85037JD03/036 Rear of EUT Facing Phantom Hotspot Mode WLAN 802.11b 1 Mbps CH6 SCN/85037JD03/037 Left Hand Side of EUT Facing Phantom Hotspot Mode WLAN 802.11b 1Mbps CH6 SCN/85037JD03/038 Right Hand Side of EUT Facing Phantom Hotspot Mode WLAN 802.11b 1Mbps CH6 SCN/85037JD03/039 Top of EUT Facing Phantom Hotspot Mode WLAN 802.11b 1Mbps CH6 SCN/85037JD03/040 Rear of EUT Facing Phantom Hotspot Mode WLAN 802.11g 6Mbps CH6 SCN/85037JD03/041 Rear of EUT Facing Phantom Hotspot Mode WLAN 802.11n 6.5Mbps CH6 SCN/85037JD03/042 Rear of EUT Facing Phantom With PHF Hotspot Mode WLAN 802.11b 1Mbps CH6 SCN/85037JD03/043 System Performance Check 900MHz Head 05 01 12 SCN/85037JD03/044 System Performance Check 900MHz Head 06 01 12 SCN/85037JD03/045 System Performance Check 900MHz Body 09 01 12 SCN/85037JD03/046 System Performance Check 900MHz Body 10 01 12 SCN/85037JD03/047 System Performance Check 900MHz Body 11 01 12 SCN/85037JD03/048 System Performance Check 1900MHz Body 16 01 12 SCN/85037JD03/049 System Performance Check 2450MHz Head 17 01 12 SCN/85037JD03/050 System Performance Check 2450MHz Body 18 01 12 SCN/85037JD03/051 em Performance Check 1900MHz Head 20 01 12 SCN/85037JD03/052 em Performance Check 2450MHz Body 19 01 12 SCN/85037JD03/053 em Performance Check 2450MHz Head 18 01 12 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 47 of 134 RFI Global Services Ltd. SCN/85037JD03/001: Touch Left GSM CH189 Date 05/01/2012 DUT: Panasonic Mobile Comms Dev of Europe Ltd; Type: S12BR5 (Sample C26); Serial: 004401221182153 0 dB = 0.080mW/g Communication System: 850 MHz; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: 900 MHz HSL Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.884 mho/m; ε r = 42.1; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6 - SN1528; ConvF(5.85, 5.85, 5.85); Calibrated: 18/07/2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn450; Calibrated: 09/02/2011 - Phantom: SAM 12b; Type: SAM 4.0; Serial: TP:1207 - Measurement SW: DASY4, V4.7 Build 55; Postprocessing SW: SEMCAD, V1.8 Build 176 Touch Left - Middle/Area Scan (81x121x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.080 mW/g Touch Left - Middle/Zoom Scan (5x5x7) (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 2.96 V/m; Power Drift = 0.148 dB Peak SAR (extrapolated) = 0.093 W/kg SAR(1 g) = 0.076 mW/g; SAR(10 g) = 0.057 mW/g Maximum value of SAR (measured) = 0.080 mW/g Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 48 of 134 RFI Global Services Ltd. SCN/85037JD03/002: Tilt Left GSM CH189 Date 05/01/2012 DUT: Panasonic Mobile Comms Dev of Europe Ltd; Type: S12BR5 (Sample C26); Serial: 004401221182153 0 dB = 0.053mW/g Communication System: 850 MHz; Frequency: 836.4 MHz;Duty Cycle: 1:8.3 Medium: 900 MHz HSL Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.884 mho/m; ε r = 42.1; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6 - SN1528; ConvF(5.85, 5.85, 5.85); Calibrated: 18/07/2011 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn450; Calibrated: 09/02/2011 - Phantom: SAM 12b; Type: SAM 4.0; Serial: TP:1207 - Measurement SW: DASY4, V4.7 Build 55; Postprocessing SW: SEMCAD, V1.8 Build 176 Tilt Left - Middle/Area Scan (81x121x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.05…

Text truncated - open the document above for the full version.

Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 127 of 134 RFI Global Services Ltd. Appendix 5. Validation of System Prior to the assessment, the system was verified in the flat region of the phantom. 900MHz, 1800 MHz, 1900MHz and 2450 MHz dipoles were used. A forward power of 250 mW was applied to the dipole and the system was verified to a tolerance of ±5% for the 900MHz, 1800MHz, 1900MHz and 2450 MHz dipoles. The applicable verification normalised to 1 Watt. 900 Head Validation: Date: 05/01/2012 Validation Dipole and Serial Number: D900V2; SN: 124 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Head 900 23.0 ºC 22.8 ºC ε r 41.50 41.96 1.12 5.00 σ 0.97 0.93 -4.47 5.00 1g SAR 11.00 10.88 -1.09 5.00 10g SAR 7.01 7.12 1.57 5.00 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 128 of 134 RFI Global Services Ltd. 900 Body Validations: Date: 09/01/2012 Validation Dipole and Serial Number: D900V2; SN: 124 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Body 900 22.0 ºC 22.2 ºC ε r 55.00 52.51 -4.52 5.00 σ 1.05 1.04 -0.75 5.00 1g SAR 11.10 10.60 -4.50 5.00 10g SAR 7.14 6.92 -3.08 5.00 Date: 10/01/2012 Validation Dipole and Serial Number: D900V2; SN: 124 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Body 900 22.0 ºC 22.2 ºC ε r 55.00 52.51 -4.52 5.00 σ 1.05 1.04 -0.75 5.00 1g SAR 11.10 11.04 -0.54 5.00 10g SAR 7.14 7.16 0.28 5.00 Date: 11/01/2012 Validation Dipole and Serial Number: D900V2; SN: 124 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Body 900 22.0 ºC 22.4 ºC ε r 55.00 52.67 -4.24 5.00 σ 1.05 1.04 -0.57 5.00 1g SAR 11.10 10.72 -3.42 5.00 10g SAR 7.14 7.00 -1.96 5.00 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 129 of 134 RFI Global Services Ltd. 1900 Head Validation: Date: 20/01/2012 Validation Dipole and Serial Number: D1900V2; SN: 540 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Head 1900 23.0 ºC 23.0 ºC ε r 40.00 38.36 -4.11 5.00 σ 1.40 1.46 3.93 5.00 1g SAR 40.30 40.40 0.25 5.00 10g SAR 21.00 20.92 -0.38 5.00 1900 Body Validation: Date: 16/01/2012 Validation Dipole and Serial Number: D1900V2; SN: 540 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Body 1900 21.0 ºC 22.2 ºC ε r 53.30 50.97 -4.38 5.00 σ 1.52 1.56 2.47 5.00 1g SAR 40.70 39.40 -3.19 5.00 10g SAR 21.60 20.76 -3.89 5.00 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 130 of 134 RFI Global Services Ltd. 2450 Head Validation: Date: 17/01/2012 Validation Dipole and Serial Number: D2450V2; SN: 725 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Head 2450 23.0 ºC 22.8 ºC ε r 39.20 38.36 -2.15 5.00 σ 1.80 1.82 0.96 5.00 1g SAR 52.90 51.20 -3.21 5.00 10g SAR 24.70 23.60 -4.45 5.00 Date: 18/01/2012 Validation Dipole and Serial Number: D2450V2; SN: 725 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Head 2450 23.0 ºC 22.4 ºC ε r 39.20 37.47 -4.40 5.00 σ 1.80 1.83 1.54 5.00 1g SAR 52.90 53.60 1.32 5.00 10g SAR 24.70 24.52 -0.73 5.00 2450 Body Validation: Date: 18/01/2012 Validation Dipole and Serial Number: D2450V2; SN: 725 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Body 2450 23.0 ºC 22.3 ºC ε r 52.70 50.60 -3.99 5.00 σ 1.95 2.02 3.82 5.00 1g SAR 51.90 53.20 2.50 5.00 10g SAR 24.10 24.32 0.91 5.00 Date: 19/01/2012 Validation Dipole and Serial Number: D2450V2; SN: 725 Simulant Frequency (MHz) Room Temp Liquid Temp Parameters Target Value Measured Value Deviation (%) Limit (%) Body 2450 23.0 ºC 23.0 ºC ε r 52.70 51.11 -3.02 5.00 σ 1.95 2.00 2.66 5.00 1g SAR 51.90 53.20 2.50 5.00 10g SAR 24.10 24.32 0.91 5.00 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 131 of 134 RFI Global Services Ltd. Appendix 6. Simulated Tissues The body mixture consists of water and glycol. Visual inspection is made to ensure air bubbles are not trapped during the mixing process. The mixture is calibrated to obtain proper dielectric constant (permittivity) and conductivity of the tissue. Ingredient Frequency 835/850/900 MHz Body De-Ionized Water 71.30 Polysorbate 20 (Tween 20) 28.00 Salt 0.70 Ingredient Frequency 1800/1900 MHz Head De-Ionized Water 55.40 Polysorbate 20 (Tween 20) 44.22 Salt 0.38 Ingredient Frequency 1800/1900 MHz Body De-Ionized Water 71.50 Polysorbate 20 (Tween 20) 28.00 Salt 0.50 Ingredient Frequency 2450 MHz Head De-Ionized Water 55.75 Polysorbate 20 (Tween 20) 45.25 Ingredient Frequency 2450 MHz Body De-Ionized Water 71.70 Polysorbate 20 (Tween 20) 28.00 Salt 0.30 Ingredient Frequency 835/850/900 MHz Head De-Ionized Water 52.87 Polysorbate 20 (Tween 20) 46.10 Salt 1.03 Test Report Serial No: RFI-SAR-RP85037JD03A V1.0 Version 1.0 Issue Date: 25 January 2012 Page: 132 of 134 RFI Global Services Ltd. Appendix 7. DASY4 System Details A. RFI Global Services Ltd, SAR measurement facility utilises the Dosimetric Assessment System (DASY™) manufactured by Schmid & Partner Engineering AG (SPEAG™) of Zurich, Switzerland. The DASY4 system is comprised of the robot controller, computer, near-field probe, probe alignment sensor, and the SAM phantom containing brain or muscle equivalent material. The robot is a six-axis industrial robot performing precise movements to position the probe to the location (points) of maximum electromagnetic field (EMF). A cell controller system contains the power supply, robot controller; teach pendant (Joystick), and remote cont…

Text truncated - open the document above for the full version.

TEST REPORT FROM RFI GLOBAL SERVICES LTD Test of: SoftBank EB-3236 FCC ID: UCE211047A To: FCC Part 22: 2011 Subpart H, Part 24: 2011 Subpart E Test Report Serial No.: RFI-RPT-RP85037JD01D This Test Report Is Issued Under The Authority Of Chris Guy, Head of Global Approvals: Checked By: Ian Watch Signature: Date of Issue: 31 January 2012 This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. TEST REPORT SERIAL NO: RFI-RPT-RP85037JD01D VERSION 1.0 ISSUE DATE: 31 JANUARY 2012 Page 2 of 55 RFI Global Services Ltd This page has been left intentionally blank. TEST REPORT SERIAL NO: RFI-RPT-RP85037JD01D VERSION 1.0 ISSUE DATE: 31 JANUARY 2012 RFI Global Services Ltd Page 3 of 55 Table of Contents 1. Customer Information .................................................................................................................. 4 2. Summary of Testing ..................................................................................................................... 5 2.1. General Information 5 2.2. Summary of Test Results 5 2.3. Methods and Procedures 6 2.4. Deviations from the Test Specification 6 3. Equipment Under Test (EUT) ....................................................................................................... 7 3.1. Identification of Equipment Under Test (EUT) 7 3.2. Description of EUT 7 3.3. Modifications Incorporated in the EUT 7 3.4. Additional Information Related to Testing 8 4. Operation and Monitoring of the EUT during Testing ............................................................. 10 4.1. Operating Modes 10 4.2. Configuration and Peripherals 10 5. Measurements, Examinations and Derived Results ................................................................ 11 5.1. General Comments 11 5.2. Test Results - Part 22 12 5.2.1. Receiver/Idle Mode AC Conducted Spurious Emissions 12 5.2.2. Receiver/Idle Mode Radiated Spurious Emissions 15 5.2.3. Transmitter Output Power (ERP) 19 5.2.4. Transmitter Frequency Stability (Temperature Variation) 20 5.2.5. Transmitter Frequency Stability (Voltage Variation) 21 5.2.6. Transmitter Occupied Bandwidth 22 5.2.7. Transmitter Out of Band Radiated Emissions 26 5.2.8. Transmitter Radiated Emissions at Band Edges 29 5.3. Test Results - Part 24 32 5.3.1. Receiver/Idle Mode AC Conducted Spurious Emissions 32 5.3.2. Receiver/Idle Mode Radiated Spurious Emissions 35 5.3.3. Transmitter Output Power (EIRP) 39 5.3.4. Transmitter Freq…

Text truncated - open the document above for the full version.