V7T3G150M150Mbps Portable Wireless AP/Router

1 1 Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. All the photos and product specifications mentioned in this manual are for references only. As the upgrade of software and hardware, there will be changes. And if there are changes, Tenda is not responsible for informing in advance. If you want to know more about our product information, please visit our website at www.tenda.cn. 2 Table of Content Chapter 1 Introduction...................................................................5 1.1 Introduction.........................................................................5 1.2 Product Features .................................................................6 1.3 Package Contents ................................................................7 1.4 LED Indicator And Port Description...................................8 Chapter 2 Hardware Installation.................................................. 11 2.1 How To Install The Router................................................ 11 2.2 Network Application Plan ................................................. 11 Chapter 3 How To Login To The Router ..................................... 14 3.1 How To Set The Wired Network Configurations .............. 14 3.2 How To Set The Wireless Network Connection................ 17 3.3 Login To The Web Interface ............................................. 18 Chapter 4 Modes Setup Wizard ................................................... 20 4.1 3G Router Mode ............................................................... 20 4.2 Wireless AP Mode............................................................. 24 4.3 WISP Mode....................................................................... 24 4.4 Wireless Router Mode....................................................... 27 Chapter 5 Advanced Settings....................................................... 31 5.1 LAN Setting...................................................................... 31 5.2 WAN Settings ................................................................... 34 5.3 MAC Address Clone ......................................................... 40 5.4 DNS Settings .......................................................... 40 3 Chapter 6 Wireless Setting .......................................................... 42 6.1 Basic Settings ......................................................... 42 6.2 Wireless Security Setting.......................................... 44 6.3 Advanced Settings................................................... 48 6.4 WPS Settings.......................................................... 49 6.5 Wireless Access Control........................................... 52 6.6 Connection Status.................................................... 53 Chapter 7 DHCP Server .............................................................. 54 7.1 DHCP Settings........................................................ 54 7.2 DHCP List And Binding........................................... 55 Chapter 8 Virtual Server .............................................................. 57 8.1 Port Range Forwarding............................................. 57 8.2 DMZ Settings.................................................................... 58 8.3 UPNP Settings .................................................................. 59 Chapter 9 Traffic Control ............................................................ 61 Chapter 10 3G WAN Traffic And Connection Timer................... 63 10.1 3G WAN Traffic.............................................................. 63 10.2 Connection Timer ........................................................... 63 Chapter 11 Security Settings ....................................................... 65 11.1 Client Filter Settings ....................................................... 65 11.2 URL Filter Settings ......................................................... 66 11.3 MAC Address Filter ........................................................ 68 11.4 Prevent Network Attack .................................................. 69 11. 5 Remote Web Management ............................................. 70 4 11.6 WAN Ping ............................................................ 71 Chapter 12 Routing Setting ......................................................... 72 Chapter 13 System Tools ............................................................. 73 13.1 Time Settings........................................................ 73 13.2 DDNS.................................................................. 74 13.3 Backup/Restore Settings......................................... 75 14.4 Restore To Factory Default Setting........................... 77 13.5 Upgrade Firmware................................................. 78 13.6 Reboot The Router................................................. 79 13.7 Password Change.................................................. 79 13.8 System Log.......................................................... 80 13.9 Logout................................................................. 81 Appendix I: How To “Obtain An Ip Automatically” ................ 82 Appendix II: How To Set The Network Adapter After Device Encrypted .................................................................................... 85 Appendix III Glossary ................................................................ 87 Appendix IV: Troubleshooting.................................................... 90 AppendixV: Comp…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: SHENZHEN TENDA TECHNOLOGY CO., LTD Address: 3F, MOSO INDUSTRIAL BUILDING, NO. 1031,LIMING ROAD，XILI TOWN, NANSHAN DISTRICT City: Shenzhen Country: China Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification, completing and signing of the RF-731 form for Certification of the following product(s): Product description: 150Mbps Portable Wireless AP/Router Type designation: 3G150M; W150M Trademark: TENDA on our behalf. Date: 2010-8-19 City: Shenzhen Name: Yuande Yao Function: Factory Director Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Neutron Engineering Inc. Project No.: 1008C176 Page 2 of 10 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 3 of 10 1008C176 1008C176 3G150M Neutron Engineering Inc. Project No.: 1008C176 Page 3 of 10 1008C176 1008C176 3G150M Neutron Engineering Inc. Project No.: 1008C176 Page 4 of 10 1008C176 1008C176 W150M Neutron Engineering Inc. Project No.: 1008C176 Page 4 of 10 1008C176 1008C176 W150M Neutron Engineering Inc. Project No.: 1008C176 Page 5 of 10 1008C176 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 5 of 10 1008C176 1008C176

Neutron Engineering Inc. Project No.: 1008C176 Page 6 of 10 1008C176 1008C176 3G150M Neutron Engineering Inc. Project No.: 1008C176 Page 6 of 10 1008C176 1008C176 3G150M Neutron Engineering Inc. Project No.: 1008C176 Page 7 of 10 1008C176 1008C176 W150M Neutron Engineering Inc. Project No.: 1008C176 Page 7 of 10 1008C176 1008C176 W150M Neutron Engineering Inc. Project No.: 1008C176 Page 8 of 10 1008C176 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 8 of 10 1008C176 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 9 of 10 1008C176 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 9 of 10 1008C176 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 10 of 10 1008C176 1008C176 Neutron Engineering Inc. Project No.: 1008C176 Page 10 of 10 1008C176 1008C176

1.1. Test Result of RF Exposure Evaluation . Product: 150Mbps Portable Wireless AP/Router Test Item: RF Exposure Evaluation Data Test site: CB03/DG-C03 Test Mode: Normal Operation 1.1.1. Antenna Gain The maximum Gain is 2.5 dBi. 1.1.2. EUT Operation condition Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 1.1.3. Output Power into Antenna & RF Exposure Evaluation Distance Modulation Standard: DSSS Test Date: Aug 21, 2010 Temperature:24°C Humidity: 60％ TX B MODE CH01, CH06, CH11 Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) ( mW/cm 2 ) 01 2412 21.47 0.049654 06 2437 22.82 0.067756 11 2462 20.67 0.041300 Modulation Standard: OFDM Test Date: Aug 21, 2010 Temperature:24°C Humidity: 60％ TX G MODE CH01, CH06, CH11 Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) ( mW/cm 2 ) 01 2412 18.34 0.024152 06 2437 18.76 0.026604 11 2462 17.50 0.049904 Modulation Standard: OFDM Test Date: Aug 21, 2010 Temperature:24°C Humidity: 60％ TX N-20M MODE CH01, CH06, CH11 Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) (mW/cm 2 ) 01 2412 17.30 0.019009 06 2437 18.54 0.025290 11 2462 18.25 0.023656 Modulation Standard: OFDM Test Date: Aug 21, 2010 Temperature:24°C Humidity: 60％ TX N-40M MODE CH03, CH06, CH09 Channel Channel Frequency (MHz) Output Power to Antenna (dBm) Power Density (S) (mW/cm 2 ) 03 2422 18.50 0.025058 06 2437 18.57 0.025465 09 2452 18.37 0.024319 The MPE is calculated as 0.067756 mW/cm 2 < limit 1 mW/cm 2 . So, RF exposure limit warning or SAR test are not required. a For 2412~2462 MHz, the EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 2 of 107 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 3 of 107 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 18 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 20 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 21 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 21 5 . BANDWIDTH TEST 21 5.1 APPLIED PROCEDURES / LIMIT 21 5.1.1 MEASUREMENT INSTRUMENTS LIST 21 5.1.2 TEST PROCEDURE 21 5.1.3 DEVIATION FROM STANDARD 21 5.1.4 TEST SETUP 21 5.1.5 EUT OPERATION CONDITIONS 21 5.1.6 TEST RESULTS 21 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 4 of 107 Table of Contents Page 6 . PEAK OUTPUT POWER TEST 21 6.1 APPLIED PROCEDURES / LIMIT 21 6.1.1 MEASUREMENT INSTRUMENTS LIST 21 6.1.2 TEST PROCEDURE 21 6.1.3 DEVIATION FROM STANDARD 21 6.1.4 TEST SETUP 21 6.1.5 EUT OPERATION CONDITIONS 21 6.1.6 TEST RESULTS 21 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 21 7.1 APPLIED PROCEDURES / LIMIT 21 7.1.1 MEASUREMENT INSTRUMENTS LIST 21 7.1.2 TEST PROCEDURE 21 7.1.3 DEVIATION FROM STANDARD 21 7.1.4 TEST SETUP 21 7.1.5 EUT OPERATION CONDITIONS 21 7.1.6 TEST RESULTS 21 8 . POWER SPECTRAL DENSITY TEST 21 8.1 APPLIED PROCEDURES / LIMIT 21 8.1.1 MEASUREMENT INSTRUMENTS LIST 21 8.1.2 TEST PROCEDURE 21 8.1.3 DEVIATION FROM STANDARD 21 8.1.4 TEST SETUP 21 8.1.5 EUT OPERATION CONDITIONS 21 8.1.6 TEST RESULTS 21 9 . RF EXPOSURE TEST 21 9.1 APPLIED PROCEDURES / LIMIT 21 9.1.1 MPE CALCULATION METHOD 21 9.1.2 DEVIATION FROM STANDARD 21 9.1.3 EUT OPERATION CONDITIONS 21 9.1.4 TEST RESULTS 21 10 . EUT TEST PHOTO 21 Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 5 of 107 1. CERTIFICATION E q u i p m e n t : 150Mbps Portable Wireless AP/Router Brand Name : TENDA Model Name : 3G150M; W150M A p p l i c a n t : SHENZHEN TENDA TECHNOLOGY CO., LTD. F a c t o r y : SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO.,LTD. A d d r e s s : Tenda Industrial Park, No. 34-1, Shilong Rd., Shiyan Town, Bao'an District, Shenzhen, P.R.China. Date of Test : Aug. 16, 2010 ~ Aug. 29, 2010 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANCI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FCCP-1-1008C176) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 6 of 107 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(d) Antenna conducted Spurious EmissionPASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(b)(3) Peak Output Power PASS 15.247(d) Radiated Spurious Emission Limit:Table 15.209/15.205 PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS 1.1307 1.1310 2.1091 2.1093 RF Exposure Compliance PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 7 of 107 2.1 TEST FACILITY The test facilities used to collect the test data in this report is CB03/DG-C03 at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China.523792 Neutron's test firm number is 319330 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 106 of 107 10. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 106 of 107 10. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 107 of 107 Radiated Measurement Photos Neutron Engineering Inc. Report No.: NEI-FCCP-1-1008C176 Page 107 of 107 Radiated Measurement Photos