
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Wireless N150/N300 Portable Router I Wireless N150/N300 Portable Router II Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com. Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of, the product or circuit layout(s) described herein. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information and recommendations in this document do not constitute the warranty of any kind, express or implied. Wireless N150/N300 Portable Router III Preface Thank you for choosing Tenda! Please read this user guide before you start! This user guide instructs you to install and configure your device. This user guide uses the following formats to highlight special messages: Icon Description Note: This format is used to highlight information of importance or special interest. Ignoring this type of note may result in ineffective configurations, loss of data or damage to device. Tip This format is used to highlight a procedure that will save time or resources. Knowledge Center Description of fields on the device GUI. Technical Support [email protected] YouTube: Tendasz1999 Hotline: 1-800-570-5892 (USA) (061) 1300787922 (Australia) (044)197-780-6119 (UK) (0852)36120883 (HongKong) (064) 800787922 (New Zealand) Website: http://www.tendacn.com Wireless N150/N300 Portable Router IV Contents Preface ......................................................................................................................................................... III Contents ..................................................................................................................................................... IV I Product Overview ........................................................................................................................................ 1 1 Package Content .............................................................................................................................................. 1 2 Getting to know your router ............................................................................................................................ 1 LED .................................................................................................................................................................. 1 Button & Interface .......................................................................................................................................... 2 Label ............................................................................................................................................................... 3 II Quick Internet Setup ................................................................................................................................... 4 1 Getting Prepared .............................................................................................................................................. 4 2 Install ................................................................................................................................................................ 4 3 Connect to Router ............................................................................................................................................ 6 3.1 Configure PC TCP/IP Settings .................................................................................................................... 6 3.2 Join Your Wireless Network ...................................................................................................................... 6 4 Auto‐detecting Internet Connection Type ..................................................................................................... 12 5 Internet Setup ................................................................................................................................................ 14 5.1 Web Login ............................................................................................................................................... 14 5.2 Manual Internet Setup& Wireless Security Setup .................................................................................. 15 6 Verify Internet Connectivity ........................................................................................................................... 27 III Features & Configurations ....................................................................................................................... 30 1 Advanced Settings .......................................................................................................................................... 30 1.1 Status ...................................................................................................................................................... 30 1.2. Internet Setup ...................................................................................................…
Text truncated - open the document above for the full version.
III Features &Connectivity 51 ③ Select the AP you wish to connect to (The SSIDs of these two wireless networks become the same now. You need to identify them by their MAC addresses.) . Click OK on the appearing dialog box and then close scan. ④ Check the automatically populated SSID, channel and MAC address, etc of the remote AP. Verify that all settings are correct and then click OK. III Features &Connectivity 52 ⑤ Set the security key of Router 2 to the same as Router 1. Click Wireless -> Security to set the security settings to match the remote device (Security Mode: WPA2-PSK, Cipher Type: AES, Security Key: 12345678). ⑥ Click Advanced -> DHCP Server and disable the DHCP server on Router 2 (Disable DHCP server on the local router that is used to extend the wireless network from the remote Internet-enabled router). Tip------------------------------------------------------------------------------------------------------------------------- If WDS connection fails, try a different security mode and/or cipher type. --------------------------------------------------------------------------------------------------------------------------------- III Features &Connectivity 53 Step 4: Configure PC3 & PC4 ③ If PC 3 and PC 4 are set to static or fixed IP addresses (This is uncommon), change them to "Obtain an IP address automatically" and "Obtain DNS server address automatically" from the device. For details, see Appendix 1Configure PC TCP/IP Settings . Tip----------------------------------------------------------------------------------------------------------------------- If PC 3 and PC 4 are already set to "Obtain an IP address automatically" and "Obtain DNS server address automatically" from the device, click Repair to repair the IP settings. -------------------------------------------------------------------------------------------------------------------------------- ④ Wait until your PC successfully obtains an IP address. III Features &Connectivity 54 Verify Bridge Connectivity: ④ On PC 3, Click Start -> Run. ⑤ Enter cmd and click OK. III Features &Connectivity 55 ⑥ Input ping 192.168.2.1 and press Enter. If you get a screen as seen below, you have successfully implemented WDS. Note --------------------------------------------------------------------------------------------------------------------- 1 WDS feature can only be implemented between 2 WDS-capable wireless devices. Plus, SSID, channel, security settings and security key must be exactly the same on both such devices. 2 To ensure a proper wireless connection, do not change any settings on the two devices after WDS is successfully implemented. --------------------------------------------------------------------------------------------------------------------------------- III Features &Connectivity 56 2.2 Wireless Security Click Wireless -> Wireless Security to enter the Wireless Security screen. Here you can define a security key to secure your wireless network against unauthorized accesses. Configuration Procedures: ① Select the wireless network (SSID) you wish to encrypt. ② Configure security mode, cipher type and security key. ③ Click OK to save your settings. Knowledge Center----------------------------------------------------------------------------------------------- 1. Open: Wireless speed can reach up to 54Mbps if WEP - Open is selected. 2. Shared: Wireless speed can reach up to 54Mbps if WEP - Shared is selected. 3. Default key: Select a key to be effective for the current WEP encryption. For example, if you select Key 1, wireless clients must join your wireless network using this Key 1. 4. WPA-PSK: WPA personal, support AES and TKIP cipher types. 5. WPA2-PSK: WPA2 personal, support AES, TKIP and TKIP+AES cipher types. 6. WPA/WPA2-PSK mixed: If selected, both WPA-PSK and WPA2-PSK secured wireless clients can join your wireless network. 7. AES: If selected, wireless speed can reach up to 300Mbps. 8. TKIP: If selected, wireless speed can reach up to 54Mbps. 9. TKIP+AES: If selected, both AES and TKIP secured wireless clients can join your wireless network. III Features &Connectivity 57 --------------------------------------------------------------------------------------------------------------------------------- 2.3 Wireless Access Control Specify a list of devices to "Permit" or "Forbid" a connection to your wireless network via the devices’ MAC Addresses. Click Wireless -> Wireless Access Control to enter the configuration screen. There are three options available: Disable, Forbid and Permit. A. If you want to allow all wireless clients to join your wireless network, select Disable. B. If you want to allow ONLY the specified wireless clients to join your wireless network, select Permit. C. If you want to disallow ONLY the specified wireless clients to join your wireless network, select Forbid. Wireless Access Control Application Example: To only allow your own notebook at the MAC address of C8:3A:35:CC:34:25 to join your wireless network Configuration Procedures: Select the wireless network (SSID) you wish to enable Access Control on. ① Select Permit. ② Enter the MAC address of the wireless device you want to restrict. Here in this example, enter C8:3A:35:CC:34:25. III Features &Connectivity 58 ③ Click Add to add the MAC address to the MAC address list. ④ Click OK to save your settings. Tip------------------------------------------------------------------------------------------------------------------------- 1. Up to 16 wireless MAC addresses can be configured. 2. If you don't want to configure the complex wireless security settings and want to disallow others to join your wireless network, you can configure a wireless access control rule to allow only your own wireless device. --------------------------------------------------------------------------------------------------------------------------------- 2.4 Wireless Clients Click Wireless -> Wireless Connection Status. Here you can see a list of wireless devices connect…
Text truncated - open the document above for the full version.