V7TW322PDET300Mbps Wireless PCI Adapter

300Mbps Wireless PCI Adapter User Guide -- 1 -- Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. All the photos and product specifications mentioned in this guide are for references only. As the upgrade of software and hardware, there will be changes. And if there are changes, Tenda is not responsible for informing in advance. If you want to know more about our product information, please visit our website at www.tenda.cn . 300Mbps Wireless PCI Adapter User Guide -- 2 -- Table of Content Chapter 1 Introduction ........................................1 1.1 Product Feature .......................................2 1.2 Product Deployment .................................3 1.3 Indicator Description ................................4 1.4 Package Contents.....................................4 Chapter 2 Installation Guide.................................5 Chapter 3 Client Utility Interface......................... 10 3.1 Station Mode ......................................... 11 3.1.1 Station Mode Topology ...................... 11 3.1.2 Status ............................................ 12 3.1.3 Site Survey ..................................... 13 3.1.4 Profile Management .......................... 14 3.1.5 Statistics......................................... 16 3.1.6 WPS Setting .................................... 16 3.2 AP Mode ............................................... 18 3.2.1 AP Mode Topology ............................ 18 3.2.2 Basic Setting ................................... 19 3.2.3 Security Setting ............................... 20 3.2.4 Access Control ................................. 21 3.2.5 About ............................................. 23 Appendix One: Acronyms and Terms ................... 24 Appendix Two: Product Specification.................... 27 Appendix Three: How to connect with PSP............ 28 300Mbps Wireless PCI Adapter User Guide -1- Chapter 1 Introduction W322P/P+ V2.0 is a Wireless PCI Adapter with up to 300Mbps transmitting rate. It adopts the very latest wireless standard—IEEE802.11n, which perfectly complies downward with IEEE802.11g/b standards, efficiently reduces the “dead spots” in wireless area and widely multiplies the wireless coverage area. W322P/P+ V2.0 is suitable for desktop computer. Its transmitting rate can reach up to 300Mbps when connected to Tenda W306R 11N Wireless Router. The high speed of wireless networking makes it ideal for on-line applications like surfing, streaming video, gaming, downloading and Voice over IP telephone, and gives you much headroom to run movies and photos in LAN. In a word, W322P/P+ V2.0 is a 300Mbps Wireless PCI Adapter with robust signal, farther transmitting distance and stable performance. 300Mbps Wireless PCI Adapter User Guide -2- Note: The only difference between W322P V2.0 and W322P+ V2.0 is that W322P+ V2.0’s antenna can be detachable. 1.1 Product Feature • Supports 300Mbps wireless receiving and transmitting rate • Complies with the latest 802.11n and 802.11b/g standards • Supports 32-bit PCI port • Supports 20MHz/40MHz frequency width • Detects wireless network and changes transmitting rate automatically • Provides two working modes: Infrastructure and Ad-Hoc • Supports 64/128-bit WEP and WPA/WPA2 encryption methods • Supports WPS encryption method to free you from memorizing long passwords 300Mbps Wireless PCI Adapter User Guide -3- • Complies with Windows Vista/XP/2000, Linux, MAC OS, etc. • Supports WMM to smooth your audio and video • Supports PSP, NDS and Wii connection with Internet and Xlink Kai to enjoy on-line gaming • Supports Soft AP to establish your wireless LAN networking quickly 1.2 Product Deployment W322P/P+ V2.0 Wireless PCI Adapter offers fast, reliable and cost- effective solution for wireless access. Deployment as follows; • For staff who requires higher mobility in the office, they want to have access to traditional wired or wireless network in any place of the company; • Enterprise or individual who requires often changes in lay out of network cables; • Companies or places which are not suitable for 300Mbps Wireless PCI Adapter User Guide -4- LAN cable laying out because of budget or objective building, including places of great interests, rent places or places for short-term usage; • Company or individual who avoids using expensive cables, renting cables or renting rights for access. 1.3 Indicator Description In the front panel of W322P/P+ V2.0, there is a LED indicator blinking when data communication is going on. 1.4 Package Contents Unpack the packets, and please find the following items: ¾ One W322P/P+ V2.0 Wireless PCI Adapter ¾ One CD-ROM 300Mbps Wireless PCI Adapter User Guide -5- Chapter 2 Installation Guide This chapter is to assist you how to use the included CD-ROM which comprises the Setup Wizard and the Client Utility Interface. The following steps on Setup Wizard are taken the Windows XP as example. 1. Please insert the Wireless PCI Adapter into the PCI port of your computer. 2. “Found New Hardware” system dialogue appears, and selects “Cancel” to use the included Setup Wizard for fast installation; of course, you also can select “Next” to install by manual. 300Mbps Wireless PCI Adapter User Guide -6- 3. Inert the included CD-ROM into the CD-ROM drive of your computer, and the Welcome screen appears. (If not appear, double click the “Setup” icon.) 300Mbps Wireless PCI Adapter User Guide -7- 4. Click “Enter”. 5. Click “Next” to start installing. 300Mbps Wireless PCI Adapter User Guide -8- 6. Click “Chang…

Text truncated - open the document above for the full version.

V7TW322PD E T SHENZHEN TENDA TECHNOLOGY CO.,LTD. 3F,Moso Industrial Building,No.1031,Liming Road,Xili Town Nanshan District,Shenzhen,P.R.CHINA FCC Confidential Authorization Date: 2010-04-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: • Detailed Circuit Schematics of EUT--- (Long term) ƒ Block Diagram--- (Long term) ƒ Circuit Description--- (Long term) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, Sincerely, . HUANG QING MANAGER SHENZHEN TENDA TECHNOLOGY CO., LTD

EXHIBIT B - EUT PHOTOGRAPHS EUT – Front View EUT – Rear View Antenna EUT – Side View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label FCC ID Label Location Label here The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT B - EUT PHOTOGRAPHS EUT – Main Board without Shielded-Cover TopView EUT – Main Board BottomView

SHENZHEN TENDA TECHNOLOGY CO., LTD. FCC ID: V7TW322PDET Report No.: RSZ10031512 Page 10 of 93 FCC Part15.247 Test Report FCC §15.247(i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Standard Applicable According to FCC §15.247(i) and §1.1307(b)(1), §2.1091, systems operating under the provisions of this section shall be operated in a manner that ensures the public is not exposed to RF energy level in excess of the communication guidelines. Limits for General Population/Uncontrolled Exposure Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mw/cm 2 ) Averaging Time (Minutes) 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Test Data Predication of MPE limit at a given distance S = PG/4πR² Where: S = power density (in appropriate units, e.g. mW/cm 2 ) P = power input to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) 802.11b Mode Maximum peak output power at antenna input terminal (dBm): 18.21 Maximum peak output power at antenna input terminal (mW): 66.222 Prediction distance (cm): 20 Prediction frequency (MHz): 2412 Antenna Gain, typical (dBi): 2.2 Maximum Antenna Gain (numeric): 1.66 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.0219 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 SHENZHEN TENDA TECHNOLOGY CO., LTD. FCC ID: V7TW322PDET Report No.: RSZ10031512 Page 11 of 93 FCC Part15.247 Test Report 802.11g Mode Maximum peak output power at antenna input terminal (dBm): 14.58 Maximum peak output power at antenna input terminal (mW): 28.708 Prediction distance (cm): 20 Prediction frequency (MHz): 2437 Antenna Gain, typical (dBi): 2.2 Maximum Antenna Gain (numeric): 1.66 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ):: 0.0095 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 802.11 n20 Mode Maximum peak output power at antenna input terminal (dBm): 17.36 Maximum peak output power at antenna input terminal (mW): 54.450 Prediction distance (cm): 20 Prediction frequency (MHz): 2412 Antenna Gain, typical (dBi): 2.2 Maximum Antenna Gain (numeric): 1.66 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ): 0.0180 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 802.11 n40 Mode Maximum peak output power at antenna input terminal (dBm): 16.89 Maximum peak output power at antenna input terminal (mW): 48.865 Prediction distance (cm): 20 Prediction frequency (MHz): 2412 Antenna Gain, typical (dBi): 2.2 Maximum Antenna Gain (numeric): 1.66 The worst case is power density at predication frequency at 20 cm (mW/cm 2 ):: 0.0161 MPE limit for general population exposure at prediction frequency (mW/cm 2 ): 1.0 Result: The predicted power density level at 20 cm is 0.0219 mw/cm 2 for 802.11b, 0.0095 mw/cm 2 for 802.11g, 0.0180 mw/cm 2 for 802.11n20 and 0.0161 mw/cm 2 for 802.11n40 which is below the uncontrolled exposure limit of 1.0 mw/cm 2 , The EUT is used at least 20 cm away from user’s body. It is determined as mobile equipment and complies with the MPE limit.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 15.247 MEASUREMENT AND TEST REPORT For SHENZHEN TENDA TECHNOLOGY CO., LTD. 3F, Moso Industrial Building, No.1031, Liming Road, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R. of China Report Type: Original Report Product Type: 300 Mbps Wireless PCI Adapter Test Engineer: Cookies Bu Report Number: RSZ10031512 Report Date: 2010-04-16 Reviewed By: Merry Zhao EMC Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 FCC ID: V7TW322PDET SHENZHEN TENDA TECHNOLOGY CO., LTD. FCC ID: V7TW322PDET Report No.: RSZ10031512 Page 2 of 93 FCC Part15.247 Test Report TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................4 OBJECTIVE...................................................................................................................................................................4 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................4 TEST METHODOLOGY..................................................................................................................................................4 TEST FACILITY.............................................................................................................................................................4 SYSTEM TEST CONFIGURATION ..........................................................................................................................6 DESCRIPTION OF TEST CONFIGURATION......................................................................................................................6 EUT EXERCISE SOFTWARE..........................................................................................................................................6 EQUIPMENT MODIFICATIONS.......................................................................................................................................6 HOST SYSTEM CONFIGURATION LIST AND DETAILS....................................................................................................7 LOCAL SUPPORT EQUIPMENT LIST AND DETAILS........................................................................................................7 EXTERNAL I/O CABLE..................................................................................................................................................7 CONFIGURATION OF TEST SETUP.................................................................................................................................8 BLOCK DIAGRAM OF TEST SETUP................................................................................................................................8 SUMMARY OF TEST RESULTS...............................................................................................................................9 FCC §15.247(i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE).........................................................10 STANDARD APPLICABLE............................................................................................................................................10 TEST DATA................................................................................................................................................................10 FCC §15.203 - ANTENNA REQUIREMENT...........................................................................................................12 STANDARD APPLICABLE............................................................................................................................................12 ANTENNA CONNECTOR CONSTRUCTION....................................................................................................................12 FCC §15.207(a) - CONDUCTED EMISSIONS ........................................................................................................13 APPLICABLE STANDARD............................................................................................................................................13 MEASUREMENT UNCERTAINTY..................................................................................................................................13 EUT SETUP................................................................................................................................................................13 EMI TEST RECEIVER SETUP.......................................................................................................................................14 TEST EQUIPMENT LIST AND DETAILS.........................................................................................................................14 TEST PROCEDURE......................................................................................................................................................14 TEST RESULTS SUMMARY..........................................................................................................................................14 TEST DATA...................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Below 1 GHz: Spurious Radiated Emissions - Front View Below 1 GHz: Spurious Radiated Emissions - Rear View Above 1 GHz: Spurious Radiated Emissions - Front View Above 1 GHz: Spurious Radiated Emissions - Rear View