VPYLB1DRCommunication Module

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 03 April 2015 Type1DR Installation Manual FCC ID of this product is as follows. FCC ID: VPYLB1DR For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC on the product and in the Installation manual Notice. Contents 1.Land Pattern (Recommended) 2.PIN Layout 3.Supply Voltage 4.Power Levels 5.Theory of operation 6. Antenna 7.Notice 17 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 03 April 2015 6. Notice Contains Transmitter Module FCC ID:VPYLB1DR Contains FCC ID: VPYLB1DR or Please describe the following warning on the final product which contains this module. ※When the product is small, as for these words mentioned above, the posting to a manual is possible. This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ●Please describe the following warning to the manual. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 18 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 03 April 2015 6. Notice Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. ●When installing it in a portable equipment. It is necessary to take a SAR test with your set mounting this module(except to use only BT/BLE or low power Wi-Fi). Class II permissive change application is necessary using the SAR report. Please contact Murata. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. ●When installing it in a mobile equipment. Please describe the following warning to the manual. If mobile equipment use only BT/BLE or low power Wi-Fi. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation de l’exposition maximale autorisée (MPE). In the case of conditions other than the above

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 05 March 2015 Module(Top --- Shielded) Please refer to the label figure for the contents of the label notation. External Photos 7.9mm Height 1.1mm MAX Weight 0.14g Confidential 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 05 March 2015 Module(Back) External Photos Confidential 4 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 05 March 2015 Confidential 6D Photos

Photo Monopole_2.4GHz_top Monopole_2.4GHz_bottom Type1DR Monopole antenna Photo Monopole_5GHz_top Monopole_5GHz_bottom Type1DR Monopole antenna Photo Dipole_2.4GHz_top Dipole_2.4GHz_bottom Type1DR Dipole antenna Photo Dual monopole_top Dual monopole_bottom Dual monopole antenna Type1DR

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 05 March 2015 Type 1DR ：Product Name XXXXXXXXX ：Inspection Number ：Name of manufacture(Murata Logo mark) ：Pin 1 Marking C M FCC ID: VPYLB1DR mark is Murata Logo mark. Please accept a logo mark as a manufacturer name. Since there is no space which indicates FCC ID, FCC ID is indicated in a manual. M C Type1DR Label Design to FCC M

3 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 05 March 2015 Module(Top --- Unshielded) Internal Photo Confidential

UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Applicant: M urata M anufacturing Co., Ltd. Type of Equipment : Communication M odule M odel No. : Type1DR FCC ID: VPYLB1DR M urata M anufacturing Co., Ltd. declares that M odel : Type1DR complies with FCC radiation exposure requirement specified in the FCC Rules 2.1091. RF Exposure Calculations: The following inform ation provides the m inim um separation distance for the highest gain antenna provided with the “Type1DR“ as calculated from FCC Part 1, §1.1310, TABLE 1 (B) Limits for General Population / Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system , considering maximum power and antenna gain, and considering a 1.0mW /cm^2 uncontrolled exposure lim it. The Friis form ula used was: S = ((P1*G1)+(P2*G2)) * G) / (4* π * r 2 ) Where P1 = 27.73 mW (M aximum average output power ) *1) P2 = 7.36 mW (M aximum average output power) *2) G1 = 1.07 Numerical Antenna gain; equal to 0.28 dBi G2 = 0.78 Numerical Antenna gain; equal to -1.10 dBi r =20.0 cm For: Type1DRS = 0.00702 mW/cm 2 Even taking into account the tolerance, this device can be satisfied with the limits. *1) W ireless LAN value *2) Bluetooth value This calculation was m ade to show that the EUT com plies with the lim it in sim ultaneous transm itting No. : 10622710S-A/-E RF Exposure / SAR Statement (Reference)

UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Applicant: M urata M anufacturing Co., Ltd. Type of Equipment: Communication M odule Model No. : Type1DR FCC ID: VPYLB1DR M urata M anufacturing Co., Ltd. declares that M odel : T ype1DR com plies w ith F C C ra dia tion exposure requirem ent specified in the F C C R ules 2.1091. RF Exposure Calculations: T he following inform ation provides the m inim um separation distance for the highest gain antenna provided with the “Type1D R“ as calculated from FCC Part 1, §1.1310, TABLE 1 (B) Limits for General Population / Uncontrolled Exposure. T his calculation is based on the highest E IRP possible from the system , considering maximum power and antenna gain, and considering a 1.0mW /cm^2 uncontrolled exposure lim it. The Friis form ula used was: S = (P * G ) / (4* π * r 2 ) Where P = 65.92 mW (M aximum average output power) G = 1.23 N um erical A ntenna gain; equal to 0.91 dBi r =20.0 cm For: Type1DRS = 0.01617 mW/cm 2 E ven taking into account the tolerance, this device can be satisfied with the lim its. No. : 10622710S-C RF Exposure / SAR Statement

Test report No. : 10622710S-C Page : 2 of 102 FCC ID : VPYLB1DR Issued date : March 9, 2015 Revised date : April 9, 2015 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 REVISION HISTORY Original Test Report No.: 10622710S-C Revision Test report No. Date Page revised Contents -(Original) 10622710S-C March 9, 2015 - - 1 10622710S-C March 11, 20155,10 Correction of description 2 10622710S-C April 1, 2015 34,35,40,41 Correction of description 3 10622710S-C April 9, 2015 5 Correction of description Test report No. : 10622710S-C Page : 3 of 102 FCC ID : VPYLB1DR Issued date : March 9, 2015 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Contents Page SECTION 1: Customer information ........................................................................................ 4 SECTION 2: Equipment under test (E.U.T.) .......................................................................... 4 SECTION 3: Test specification, procedures & results ........................................................... 6 SECTION 4: Operation of E.U.T. during testing .................................................................... 9 SECTION 5: Conducted emission .......................................................................................... 11 SECTION 6: 6dB bandwidth & Occupied bandwidth (99%) .............................................. 12 SECTION 7: Maximum peak output power .......................................................................... 12 SECTION 8: Out of band emissions (Antenna port conducted) ......................................... 12 SECTION 9: Peak power density ........................................................................................... 12 SECTION 10: Radiated emission ........................................................................................... 13 Contents of APPENDIXES ....................................................................................................... 16 APPENDIX 1: Data of Radio tests .......................................................................................... 17 APPENDIX 2: Test instruments ............................................................................................. 97 APPENDIX 3: Photographs of test setup ............................................................................... 98 Test report No. : 10622710S-C Page : 4 of 102 FCC ID : VPYLB1DR Issued date : March 9, 2015 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 SECTION 1: Customer information Company Name : Murata Manufacturing Co., Ltd. Address : 10-1, Higashikotari 1-chome, Nagaokakyo-shi, Kyoto 617-8555 Japan Telephone Numbe r : +81-75-955-6173 Facsimile Numbe r : +81-75-955-7096 Contact Person : Noriko Ueno SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of equipmen t : Communication Module Model No. : Type1DR Serial No. : Refer to 4.2 in this report. Rating : 3.2(VBAT), 1.8(VDDXO), 1.8 or 3.3(VIO) Country of Mass- production : China, Japan Condition of EUT : Engineering prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No modification by the test lab. Receipt Date of Sample : December 22, 2014 2.2 Product description Model: Type1DR (referred to as the EUT in this report) is Communication Module. Clock frequency(ies) in the system : 37.4MHz Test report No. : 10622710S-C Page : 5 of 102 FCC ID : VPYLB1DR Issued date : March 9, 2015 Revised date : April 9, 2015 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radio Specification Equipment type : Transceiver Frequency of operation : 2.4GHz: 2402-2480MHz (Bluetooth BDR/EDR/Low Energy (LE)) 2412-2462MHz (IEEE 802.11b, 11g, 11n (HT20)) W52: 5180-5240MHz (IEEE 802.11a, 11n (HT20), 11ac (VHT20)) 5190-5230MHz (IEEE 802.11n (HT40), 11ac (VHT40)) 5210MHz (IEEE 802.11ac (VHT80)) W53: 5260-5320MHz (IEEE 802.11a, 11n (HT20), 11ac (VHT20)) 5270-5310MHz (IEEE 802.11n (HT40) , 11ac (VHT40)) 5290MHz (IEEE 802.11ac (VHT80)) W56: 5500-5700MHz (IEEE 802.11a, 11n (HT20), 11ac (VHT20)) 5510-5670MHz (IEEE 802.11n (HT40), 11ac (VHT40)) 5530-5610MHz (IEEE 802.11ac (VHT80)) W58: 5745-5825MHz (IEEE 802.11a, 11n (HT20), 11ac (VHT20)) 5755-5795MHz (IEEE 802.11n (HT40) , 11ac (VHT40)) 5775MHz(IEEE 802.11ac (VHT80)) Bandwidth : 20MHz (IEEE 802.11a/b/g/n/ac), 40MHz (IEEE 802.11n/ac), 80MHz(IEEE 802.11ac) , 79MHz (Bluetooth BDR/EDR), 1MHz (Bluetooth LE) Channel spacing : 5MHz (Wi-Fi 2.4GHz), 20MHz/40MHz/80MHz (Wi-Fi 5GHz), 1MHz (Bluetooth BDR/EDR), 2MHz (Bluetooth LE) Type of modulation : DSSS (IEEE 802.11b), OFDM (IEEE 802.11a/g/n/ac), FHSS (Bluetooth BDR/EDR), GFSK (Bluetooth LE) Antenna type : [2.4GHz] Monopole antenna/Dipole antenna/Dual monopole antenna [5GHz] Monopole antenna/ Dual monopole antenna Antenna connector type : spring Antenna gain : [2.4GHz] Monopole antenna:+0.91dBi [2.4GHz] Dipole antenna:-0.15dBi [2.4GHz] Dual monopole antenna:-1.1dBi [5GHz] Monopole antenna:+1.0dBi [5GHz] Dual monopole antenna:+0.28dBi TU code : F1D, G1D (Bluetooth BDR/EDR), F1D (Bluetooth LE) D1D, G1D (IEEE802.11b/g/n/a/ac) Operation temperature range : -20 to +85 deg.C * For Bluetooth BDR/EDR part, refer to the test report: 10622710S-A. For FCC 15.407, refer to the test reports: 10622710S-E. FCC 15.31 (e) / 212 The RF Module has its own regulator. The RF Module is constantly provided voltage (DC 1.2, 1.35, 2.5 and 3.0V) through the regulator regardless of input voltage. Therefore, this EUT complies with the requirement of 15.212. FCC 15.203 / 212 It is impossible for end users to replace the antenna, because it is soldered on the circuit board…

Text truncated - open the document above for the full version.

Test report No. : 10005707S-A Page : 21 of 23 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 APPENDIX 3: Photographs of test setup Conducted emission Front Side Test report No.: 10622710S-C 98 of 102 Test report No. : 10005707S-A Page : 22 of 23 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radiated emission Front Rear (below 1GHz) Rear (above 1GHz) Test report No.: 10622710S-C 99 of 102 Test report No. : 10005707S-A Page : 23 of 23 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Bluetooth Low Energy Monopole antenna Dipole antenna Front Front Rear (below 1GHz) Rear (below 1GHz) Rear (above 1GHz) Rear (above 1GHz) Test report No.: 10622710S-C 100 of 102 Test report No. : 10005707S-A Page : 24 of 23 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Pre-check of the worst position Monopole antenna Dipole antenna X-axis X-axis Y-axis Y-axis Z-axis Z-axis Test report No.: 10622710S-C 101 of 102 Test report No. : 10005707S-A Page : 25 of 23 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Dual monopole antenna X-axis Y-axis Z-axis END OF REPORT Test report No.: 10622710S-C 102 of 102