VPYLB2EA003Communication Module

Date: August 24, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: VPYLB2EA003 Murata Manufacturing Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Murata Manufacturing Co., Ltd. (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. Murata Manufacturing Co., Ltd. (“the applicant”) certifies that the RF device is not a router “produced in a foreign country”. Murata Manufacturing Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, KENJI HAYASHIKOSHI Murata Manufacturing Co., Ltd.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(7) Filing Date: March 13, 2026 Murata Manufacturing Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, Murata Electronics North America, Inc. (“the agent”) is our designated U.S. agent for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The agent accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Sincerely, Designated U.S. Agent Information: FRN: 0024753089 Company Name: Murata Electronics North America, Inc. Contact Person: Mark E Tucker Address: 3330 Cumberland Blvd SE Suite 700 Atlanta, GA 30339 US Tel.: (678)684-2009 Email: [email protected] U.S. Agent Signature: Applicant: FRN: 0017033432 Company Name: Murata Manufacturing Co., Ltd. Contact Person: KENJI HAYASHIKOSHI Address: 10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555, Japan Tel.: +81-50-1737-2801 Email: [email protected] Applicant Signature:

Authorization Letter July 23, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: VPYLB2EA003 Applicant: Murata Manufacturing Co., Ltd. To whom it may concern: We, the undersigned, hereby authorize Shinya Watanabe of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely, ______________________________ KENJI HAYASHIKOSHI Murata Manufacturing Co., Ltd.

Request for Modular Transmitter Approval July 23, 2026 FCC ID: VPYLB2EA003 Applicant: Murata Manufacturing Co., Ltd. This transmitter, model: LBEE5XV2EA, LBEE5XV2EC is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15.212 as indicated below: Modular Approval Checklist: Modular approval requirement Yes No (1) Have its own RF shielding. (2) Have buffered modulation/data inputs. (3) Have its own power supply regulation. (4) Comply with the antenna and transmission system requirements of § 15.203, 15.204(b) and 15.204(c). Installed inside the final product. (5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. (6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Since this is so small to label with a font size that is four-points or larger and it does not utilize electronic labeling, the FCC ID is placed in the user manual and the packaging according to KDB784748. (7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. (8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. ______________________________ KENJI HAYASHIKOSHI Murata Manufacturing Co., Ltd.

Request for Long-Term Confidentiality July 23, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: VPYLB2EA003 Applicant: Murata Manufacturing Co., Ltd. To whom it may concern: Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459: Block Diagram Operational Description Schematics The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the marketplace. Thank you for your attention to this matter. Sincerely, ______________________________ KENJI HAYASHIKOSHI Murata Manufacturing Co., Ltd.

Request for Short-Term Confidentiality July 23, 2026 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID: VPYLB2EA003 Applicant: Murata Manufacturing Co., Ltd. To whom it may concern: Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization based on the FCC rules 0.457 and 0.459: External Photos Internal Photos Test Setup Photos User Manual The application contains technical information, which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the marketplace. Thank you for your attention to this matter. Sincerely, ______________________________ KENJI HAYASHIKOSHI Murata Manufacturing Co., Ltd.

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 06 August 2026 LBEE5XV2EA , Label Design 9.4 mm 12.5 mm 0.8mm 0.8mm 0.8mm 1.5mm 2.8mm 0.6mm : Name of manufacture (Murata Logo mark) LBEE5XV2EA :Model Name abbreviation SS9999999 :Lot No. 000000001 : SerialNumber : Pin 1 Marking : 2DCode 2.8mm SS9999999 Post the label on the manual and packing materials because there is no space to print the FCC ID, IC Number, HVIN and “indoor use only” LBEE5XV2EA 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 06 August 2026 LBEE5XV2EA Labelinformationpasting Labeling Packages FCC ID:VPYLB2EA003 IC:772C-LB2EA003 HVIN:LBEE5XV2EA When operating in W52/W53(for ISED) and 6XD(for FCC/ISED), the device is restricted to indoor use only. ***-******

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 06 August 2026 LBEE5XV2EC , Label Design 9.4 mm 12.5 mm 0.8mm 0.8mm 0.8mm 1.5mm 2.8mm 0.6mm : Name of manufacture (Murata Logo mark) LBEE5XV2EC :Model Name abbreviation SS9999999 :Lot No. 000000001 : SerialNumber : Pin 1 Marking : 2DCode 2.8mm SS9999999 Post the label on the manual and packing materials because there is no space to print the FCC ID, IC Number, HVIN and “indoor use only” LBEE5XV2EC 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 06 August 2026 LBEE5XV2EC Labelinformationpasting Labeling Packages FCC ID:VPYLB2EA003 IC:772C-LB2EA003 HVIN:LBEE5XV2EC When operating in W52/W53(for ISED) and 6XD(for FCC/ISED), the device is restricted to indoor use only. ***-******

UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RF Exposure / MPE Calculation Customer Murata Manufacturing Co., Ltd. Description of EUT Communication module Model Number of EUT LBEE5XV2EA FCC ID VPYLB2EA003 Murata Manufacturing Co., Ltd. declares that Model: LBEE5XV2EA complies with FCC radiation exposure requirement specified in the FCC Rule 2.1091 (for mobile). RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “LBEE5XV2EA“ as calculated from (B) Limits for General Population / Uncontrolled Exposure of TABLE 1- LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) of §1.1310 Radiofrequency radiation exposure limits. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1mW/cm^2 uncontrolled exposure limit. The Friis formula used was: 2 4r GP S ×× × = π [Bluetooth (LE) part] 4.47 mW (Maximum average output power) ☐ Time average was used for the above value in consideration of 6-minutes time-averaging ☒ Burst power average was used for the above value in consideration of worst condition. G =1.000 Numerical Antenna gain; equal to 0 dBi r =20 cm (Separation distance) 0.00089 mW/cm 2 Power Density Result S = [Bluetooth (BR / EDR) part] P =5.62 mW (Maximum average output power) ☐ Time average was used for the above value in consideration of 6-minutes time-averaging ☒ Burst power average was used for the above value in consideration of worst condition. G =1.000 Numerical Antenna gain; equal to 0 dBi r =20 cm (Separation distance) 0.00112 mW/cm 2 Power Density Result S = UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 [WLAN 2.4 GHz band part] P = 31.62 mW (Maximum average output power) ☐ Time average was used for the above value in consideration of 6-minutes time-averaging ☒ Burst power average was used for the above value in consideration of worst condition. G =2.000 Numerical Antenna gain; equal to 3.01 dBi r =20 cm (Separation distance) 0.01258 mW/cm 2 Power Density Result S = [WLAN 5 GHz band part] P =19.95 mW (Maximum average output power) ☐ Time average was used for the above value in consideration of 6-minutes time-averaging ☒ Burst power average was used for the above value in consideration of worst condition. G = 2.825 Numerical Antenna gain; equal to 4.51 dBi r =20 cm (Separation distance) 0.01121 mW/cm 2 Power Density Result S = [WLAN 6 GHz band part] P = 6.31 mW (Maximum average output power) ☐ Time average was used for the above value in consideration of 6-minutes time-averaging ☒ Burst power average was used for the above value in consideration of worst condition. G = 3.170 Numerical Antenna gain; equal to 5.01 dBi r = 20 cm (Separation distance) 0.00398 mW/cm 2 Power Density Result S =

1 murata.comCopyright © Murata Manufacturing Co., Ltd. All rights reserved.04 August 2026 1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 1KT-001 Antenna FCC/ISED Radio Act Application Antenna Information 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 1KT-001 Antenna Antenna Application information Application Antenna Name: 1KT-001 Antenna_RF cable 30mm Application Antenna Type : Monopole antenna Application Antenna Gain : 0dBi @ 2.4GHz band 1.5dBi @ 5GHz band 2.0dBi @ 6GHz band Application Antenna Name: 1KT-001 Antenna_RF cable 300mm Application Antenna Type : Monopole antenna Application Antenna Gain : -1.8dBi @ 2.4GHz band -2.2dBi @ 5GHz band -2.2dBi @ 6GHz band 3 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL Measurement result Type1KT_Cable length 30mm [dBi][dB] hor.ver.hor.ver.hor.ver. MAX.-4.2-4.00.0-15.0-0.6-3.6 AVE.-7.8-7.1-5.0-19.3-6.8-6.9 MAX.-1.31.5-2.7-7.70.3-4.9 AVE.-5.5-6.6-8.1-13.1-4.6-10.7 MAX.2.01.1-0.8-7.10.7-4.1 AVE.-4.9-5.8-6.7-12.0-3.5-9.5 XY-planeYZ-planeZX-plane Total Efficiency -4.0 -3.8 -2.9 LINEAR POLARIZATION 2400 MHz 5745 MHz 5935 MHz <Efficiency> ＊Red color shows peak gain <Directivity> 4 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL [dBi][dB] hor.ver.hor.ver.hor.ver. MAX.-2.6-7.6-1.8-16.6-8.4-8.0 AVE.-9.8-11.9-8.3-21.2-14.7-12.4 MAX.-3.4-6.2-2.2-17.6-4.8-9.1 AVE.-11.8-11.1-11.7-22.7-11.4-15.3 MAX.-11.8-8.0-4.4-11.3-2.2-8.0 AVE.-18.3-16.8-11.6-17.3-9.8-14.7 -8.2 -10.1 -11.2 LINEAR POLARIZATION XY-planeYZ-planeZX-plane Total Efficiency 2400 MHz 5500 MHz 6900 MHz Measurement result Type1KT_Cable length 300mm <Efficiency> ＊Red color shows peak gain <Directivity> 5 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 1. Test method for antenna gain measurement •Test method for antenna gain measurement: Standard antenna method (comparative method) * Comparing a measured antenna to a standard antenna with a known gain factor •Equipment used for antenna gain measurement (model name, serial number, calibration date, etc.); - Measurement system (*details next page) Microwave Vision Group SG32 18GHz (S/N: TYP6581S) - Calibration date : December 26, 2025 - Network Analyzer P9374A (S/N: MY57213280) - Calibration date : June 2, 2025 - Antenna gain measurement date / Measurement personJanuary 14, 2026 / Rie Ichimura

Test Report No. 16247275H-D Page 1 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No. 16247275H-D Customer Murata Manufacturing Co., Ltd. Description of EUT Communication module Model Number of EUT LBEE5XV2EA FCC ID VPYLB2EA003 Test Regulation FCC Part 15 Subpart E Test Result Complied Issue Date June 24, 2026 Remarks DFS test only Client without radar detection Representative test engineer Approved by Takafumi Noguchi Engineer Takumi Shimada Engineer CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 26.0 Test Report No. 16247275H-D Page 2 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Revision Test Report No. Date Page Revised Contents - (Original) 16247275H-D June 24, 2026 - • This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. • The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.) • This sample tested is in compliance with the limits of the above re gulation. • The test results in this test report are traceable to the national or international standards. • This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body. • This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable) • The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab. • The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited. • The information provided b y the customer for this report is identified in SECTION 1. • The laboratory is not responsible for information provided by the customer which can impact the validit y of the results. • For any test report referred in this report, the latest version (including any revisions) is always referred to. • If the latest version is a revision, it replaces the previous version. See the table below for revisions and versions. Test Report No. 16247275H-D Page 3 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation ICES Interference-Causing Equipment Standard AC Alternating Current IEC International Electrotechnical Commission AFH Adaptive Frequency Hopping IEEE Institute of Electrical and Electronics En gineers AM Amplitude Modulation IF Intermediate Frequency Amp, AMP Amplifier ILAC International Laboratory Accreditation Conference ANSI American National Standards Institute ISED Innovation, Science and Economic Develo pment Canada Ant, ANT Antenna ISO International Organization for Standardization AP Access Point JAB Japan Accreditation Board ASK Amplitude Shift Keying LAN Local Area Network Atten., ATT Attenuator LIMS Laboratory Information Management S ystem AV Average MCS Modulation and Coding Scheme BPSK Binary Phase-Shift Keying MRA Mutual Recognition Arrangement BR Bluetooth Basic Rate N/A Not Applicable BT Bluetooth NIST National Institute of Standards and Technolo gy BT LE Bluetooth Low Energy NS No signal detect. BW BandWidth NSA Normalized Site Attenuation Cal Int Calibration Interval NVLAP National Voluntary Laboratory Accreditation Pro gram CCK Complementary Code Keying OBW Occupied Band Width Ch., CH Channel OFDM Orthogonal Frequency Division Multiplexing CISPR Comite International Special des Perturbations Radioelectriques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PRBS Pseudo-Random Bit Sequence DSSS Direct Sequence Spread Spectrum PSD Power Spectral Density EDR Enhanced Data Rate QAM Quadrature Amplitude Modulation EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QP Quasi-Peak EMC ElectroMagnetic Compatibility QPSK Quadri-Phase Shift Keying EMI ElectroMagnetic Interference RBW Resolution Band Width EN European Norm RDS Radio Data System ERP, e.r.p. Effective Radiated Power RE Radio Equipment EU European Union RF Radio Frequency EUT Equipment Under Test RMS Root Mean Square Fac. Factor RSS Radio Standards Specifications FCC Federal Communications Commission Rx Receiving FHSS Frequency Hopping Spread Spectrum SA, S/A Spectrum Analyzer FM Frequency Modulation SG Signal Generator Freq. Frequency SVSWR Site-Voltage Standing Wave Ratio FSK Frequency Shift Keying TR Test Receiver GFSK Gaussian Frequency-Shift Keying Tx Transmitting GNSS Global Navigation Satellite System VBW Video BandWidth GPS Global Positioning System Vert. Vertical Hori. Horizontal WLAN Wireless LAN Test Report No. 16247275H-D Page 4 of 22 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 CONTENTS PAGE SECTION 1: Customer Information ...................................................................................... 5 SECTION 2: Equipment Under Test (EUT) .......................................................................... 5 SECTION 3: Scope of Report ............................................................................................... 7 SECTION 4: Test Summary .................................................................................................. 7 SECTION 5: Operation of EUT during testing ................................................................... 13 SECTION 6: Chann…

Text truncated - open the document above for the full version.

Test Report No. 16247275H-C-R1 Page 1 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No. 16247275H-C-R1 Customer Murata Manufacturing Co., Ltd. Description of EUT Communication module Model Number of EUT LBEE5XV2EA FCC ID VPYLB2EA003 Test Regulation FCC Part 15 Subpart E Test Result Complied Issue Date August 18, 2026 Remarks WLAN (5 GHz band) part Except for DFS test Representative Test Engineer Approved By Takafumi Noguchi Engineer Takumi Shimada Engineer CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Report Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 26.0 Test Report No. 16247275H-C-R1 Page 2 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Revision Test Report No. Date Page Revised Contents - (Original) 16247275H-C June 24, 2026 - 1 16247275H-C-R1 August 18, 2026 Section 2.1 -Modified test date March 15 to May 20, 2026 → March 15 to August 17, 2026 Section 4.1 *The Details of Operation Mode(s) -Modified explanatory note *3) *3) Spurious emissions testing was conducted only with full bandwidth RU allocation, since preliminary testing indicated that the full bandwidth RU allocation emitted higher spurious emissions than partial bandwidth RU allocation. → *3) Except for the 11ax-40 242-tone and 11ax-80 484-tone configurations, spurious emissions testing for partial-bandwidth RU allocation was conducted only at the band edge, since preliminary testing indicated that the full bandwidth RU allocation emitted higher spurious emissions than partial bandwidth RU allocation. Appendix 1 Maximum Conducted Output Power (Reference data) -Remove ANT 1 data. Radiated Spurious Emission -Added test data (10 GHz to 40 GHz) for IEEE 802.11ax-40 242-tone, 11ax-80 484-tone. • This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. • The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.) • This sample tested is in compliance with the limits of the above re gulation. • The test results in this test report are traceable to the national or international standards. • This test report must not be used by the customer to claim product certification, approval, or endorsement b y the A2LA accreditation body. • This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable) • The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab. • The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited. • The information provided b y the customer for this report is identified in SECTION 1. • The laboratory is not responsible for information provided by the customer which can impact the validit y of the results. • For any test report referred in this report, the latest version (including any revisions) is always referred to. • If the latest version is a revision, it replaces the previous version. See the table below for revisions and versions. Test Report No. 16247275H-C-R1 Page 3 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation IEC International Electrotechnical Commission AC Alternating Current IEEE Institute of Electrical and Electronics Engineers AFH Adaptive Frequency Hopping IF Intermediate Frequency AM Amplitude Modulation ILAC International Laboratory Accreditation Conference Amp, AMP Amplifier ISED Innovation, Science and Economic Development Canada ANSI American National Standards Institute ISO International Organization for Standardization Ant, ANT Antenna JAB Japan Accreditation Board AP Access Point LAN Local Area Network ASK Amplitude Shift Keying LIMS Laboratory Information Management System Atten., ATT Attenuator MCS Modulation and Coding Scheme AV Average MRA Mutual Recognition Arrangement BPSK Binary Phase-Shift Keying N/A Not Applicable BR Bluetooth Basic Rate NIST National Institute of Standards and Technology BT Bluetooth NS No signal detect. BT LE Bluetooth Low Energy NSA Normalized Site Attenuation BW BandWidth NVLAP National Voluntary Laboratory Accreditation Program Cal Int Calibration Interval OBW Occupied Band Width CCK Complementary Code Keying OFDM Orthogonal Frequency Division Multiplexing Ch., CH Channel OFDMA Orthogonal Frequency Division Multiple Access CISPR Comite International Special des Perturbations Radioelectriques P/M Power meter CW Continuous Wave PCB Printed Circuit Board DBPSK Differential BPSK PER Packet Error Rate DC Direct Current PHY Physical Layer D-factor Distance factor PK Peak DFS Dynamic Frequency Selection PN Pseudo random Noise DQPSK Differential QPSK PP Preamble Puncturing DSSS Direct Sequence Spread Spectrum PRBS Pseudo-Random Bit Sequence EDR Enhanced Data Rate PSD Power Spectral Density EIRP, e.i.r.p. Equivalent Isotropically Radiated Power QAM Quadrature Amplitude Modulation EMC ElectroMagnetic Compatibility QP Quasi-Peak EMI ElectroMagnetic Interference QPSK Quadri-Phase Shift Keying EN European Norm RBW Resolution Band Width ERP, e.r.p. Effective Radiated Power RDS Radio Data System EU European Union RE Radio Equipment EUT Equipment Under Test RF Radio Frequency Fac. Factor RMS Root Mean Square FCC Federal Communications Commission RSS Radio Standards Specifications FHSS Frequency Hopping Spread Spectrum Rx Receiving FM Frequency Modulation SA, S/A Spectrum Analyzer Freq. Frequency SG Signal Generator FSK Frequency Shift Keying SVSWR Site-Voltage Standing Wave Ratio…

Text truncated - open the document above for the full version.

Test Report No. 16247275H-C-R1 Page 119 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-40(OFDMA), 52-tone RU 5755 MHz RU Index 37 5795 MHz RU Index 44 Test Report No. 16247275H-C-R1 Page 120 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-40(OFDMA), 106-tone RU 5755 MHz RU Index 53 5795 MHz RU Index 56 Test Report No. 16247275H-C-R1 Page 121 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-40(OFDMA), 242-tone RU 5755 MHz RU Index 61 5795 MHz RU Index 62 Test Report No. 16247275H-C-R1 Page 122 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-40(OFDMA), 484-tone RU 5755 MHz RU Index 65 5795 MHz RU Index 65 Test Report No. 16247275H-C-R1 Page 123 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ac-80 5775 MHz Test Report No. 16247275H-C-R1 Page 124 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDM) 5775 MHz Test Report No. 16247275H-C-R1 Page 125 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDMA), 26-tone RU 5775 MHz RU Index 0 RU Index 36 Test Report No. 16247275H-C-R1 Page 126 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDMA), 52-tone RU 5775 MHz RU Index 37 RU Index 52 Test Report No. 16247275H-C-R1 Page 127 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDMA), 106-tone RU 5775 MHz RU Index 53 RU Index 60 Test Report No. 16247275H-C-R1 Page 128 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDMA), 242-tone RU 5775 MHz RU Index 61 RU Index 64 Test Report No. 16247275H-C-R1 Page 129 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDMA), 484-tone RU 5775 MHz RU Index 65 RU Index 66 Test Report No. 16247275H-C-R1 Page 130 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 6 dB Bandwidth 11ax-80(OFDMA), 996-tone RU 5775 MHz RU Index 67 Test Report No. 16247275H-C-R1 Page 131 of 588 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Maximum Conducted Output Power Mode Tx 11a Date Test Site Temperature Humidity Engineer March 16, 2026 MR8 23 deg.C 38 %RH Takafumi Noguchi 11a ANT 0 + ANT 1 Tested Conducted power e.i.r.p. Freq. Antenna Result FCC 15.407 RSS-247 Antenna Result FCC 15.407 RSS-247 ANT 0 ANT 1 Sum Limit Margin Limit Margin ANT 0 ANT 1 Sum Limit Margin Limit Margin [MHz] [mW] [mW] [mW] [dBm] [dBm] [dB] [dBm] [dB] [mW] [mW] [mW] [dBm] [dBm] [dB] [dBm] [dB] 5180 9.86 9.82 19.68 12.95 23.97 11.02 - - 27.86 27.74 55.60 17.46 29.97 12.51 22.20 4.74 5220 9.98 9.46 19.44 12.89 23.97 11.08 - - 28.19 26.73 54.92 17.40 29.97 12.57 22.20 4.80 5240 9.91 9.57 19.48 12.90 23.97 11.07 - - 27.99 27.04 55.03 17.41 29.97 12.56 22.20 4.79 5260 9.86 9.25 19.11 12.82 23.97 11.15 23.20 10.38 27.86 26.12 53.99 17.33 29.97 12.64 29.20 11.87 5300 9.68 8.91 18.60 12.70 23.97 11.27 23.20 10.50 27.35 25.18 52.53 17.21 29.97 12.76 29…

Text truncated - open the document above for the full version.