VPYLBWA0ZZ2JMCommunication Module

Declaration Date: January 19, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Examiner: We declare that this equipment (Product Name: Communication Module, FCC ID: VPYLBWA0ZZ2JM) complies with e-CFR Title 47 Part 2.925 (f), as it is too small to be labeled with FCC ID (smaller than 4-6 points). Hence the FCC ID is placed in user manual and packaging instead of being affixed on the equipment. Sincerely, Signature: Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 24, 2025 Ref: Attestation Statements Part 2.911(d)(7) Filing [Murata Manufacturing Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, [Murata Electronics North America, Inc.] is our designated U.S. agent for service of process.[Murata Manufacturing Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Murata Electronics North America, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process. Sincerely, Designated U.S. Agent Information: Name: Murata Electronics North America, Inc. FRN: 0024753089 Contact Person: Mark E Tucker Address: 3330 Cumberland Blvd SE Suite 700 Atlanta, GA 30339 US Tel.: (678)684-2009 Email: [email protected] Mark E. Tucker July 24, 2025 U.S. Agent Signature: Applicant: Company Name: Murata Manufacturing Co., Ltd. FRN: 0017033432 Contact Person: Kenji Hayashikoshi Address: 1-10-1, Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Tel.: +81-50-1737-2801 Email: [email protected] Applicant Signature:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 19, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i)&(ii) Filing FCC ID: VPYLBWA0ZZ2JM Statement for 47 CFR section 2.911(d)(5)(i) [Murata Manufacturing Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Murata Manufacturing Co., Ltd.] (“the applicant”) certifies that the software to be loaded prior to marketing of the equipment for which authorization is sought does not include cybersecurity or anti- virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). ☒ Device is inherently compliant based on hardware limitations or software controls. or ☐ A Software Bill of Materials (SBOM) is provided to the TCB for review, and ☐ The end-user or third parties cannot install additional software on this device. Statement for 47 CFR section 2.911(d)(5)(ii) [Murata Manufacturing Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to §1.50002, as a specifically named entity or any of its subsidiaries or affiliates that producing “covered” equipment. Sincerely, Signature: Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Date: January 19, 2026 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: VPYLBWA0ZZ2JM Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of (180) days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Software defined radio Security Description ☒ Permanent ------------------ Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: KENJI HAYASHIKOSHI Title: Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: VPYLBWA0ZZ2JM Items to be covered by modular transmitters. Y/N Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes The module contains its own RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. Yes The module’s transmitter chip utilizes buffered data inputs. 3. The modular transmitter must have its own power supply regulation. No The module is limited as it does not have its own power supply regulators. The installation guide (user manual) instructs the OEM integrators to supply a stable input power range to the module via an external regulator. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Yes The module connection to the antenna is made through a host’s printed board microstrip trace layout to an external unique connector that meets the requirements. The installation guide (user manual) provides a specific referenced antenna trace design to the OEM integrators according to the KDB 996369 D02 Q&A 11. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Yes The module is tested in a stand-alone configuration. Please see setup photos and test configuration in the test report. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Yes The dimension of the module is smaller than 1cm 2 that leads to affixing the FCC ID on the module with font size larger than 4 point impractical, hence, the FCC ID is demonstrated in the installation guide (user manual) instead, it instructs the OEM integrators on how to label the end product as well. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. Yes The module complies with all applicable FCC rules. Details instructions for maintaining compliance are given in the installation guide (user manual). 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. Yes The module complies with RF exposure requirements. Evaluation is addressed in the RF exposure information exhibition. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): KENJI HAYASHIKOSHI Date:January 19, 2026 Signature:

Date: January 19, 2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: VPYLBWA0ZZ2JM To whom it may concern: We, the undersigned, hereby authorize Jim Chang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Agency Agreement Expiration Date: January 5, 2027 This authorization is valid until further written notice from the applicant. Sincerely, Signature: Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Murata Manufacturing Co., Ltd. 1-10-1, Higashikotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Professional Installation Declaration Date: 2/25/2026 FCC ID：VPYLBWA0ZZ2JM To Whom It May Concern: This RF module is intended solely for installation by professional integrators and OEM manufacturers. The module is not sold to the general public and is not available through retail channels, ensuring it is not readily accessible to average consumers. Integration requires specialized RF knowledge, including proper antenna selection, gain configuration, PCB layout considerations, and host system compliance validation, which can only be performed by qualified personnel. RF parameters must be set by professional installers following manufacturer instructions that are not provided to end users. The module is designed for industrial/commercial host equipment and requires controlled distribution, specialized tools, and technical training to install correctly and maintain compliance with FCC Part 15 requirements. Sincerely yours, Applicant’s company name : Murata Manufacturing Co., Ltd. Applicant’s company address : 1-10-1, Higashikotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Signature : Contact person : Kenji Hayashikoshi E-Mail : [email protected] Tel : +81-50-1737-2801

Declaration Date: January 19, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Examiner: We declare that this equipment (Product Name: Communication Module, FCC ID: VPYLBWA0ZZ2JM) complies with e-CFR Title 47 Part 2.925 (f), as it is too small to be labeled with FCC ID (smaller than 4-6 points). Hence the FCC ID is placed in user manual and packaging instead of being affixed on the equipment. Sincerely, Signature: Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2511000906ES Page: 1 of 10 RF EXPOSURE REPORT Applicant: Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Manufacturer: Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Product Name: Communication Module Brand Name: Murata Manufacturing Co., Ltd. Model No.: LBWA0ZZ2JM FCC ID VPYLBWA0ZZ2JM IC: 772C-LBWA0ZZ2JM Date of EUT Received: Nov. 20, 2025 Issue Date: Jan. 21, 2026 Approved By John Yeh We hereby certify that: The above equipment was evaluated by SGS Taiwan Ltd. The evaluation in this report is in compliance with FCC Rule Part §1.1307 & KDB 447498 D04 v01 and RSS-102 issue 6. The results of this report relate to the specific sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2511000906ES Page: 2 of 10 Revision History Report Number Revision Description Issue Date Revised By Remark TESA2511000906ES 00 Original Jan. 21, 2026 Cindy Chou Note: 1、 The remark "*" indicates modification of the report upon requests from certification body. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2511000906ES Page: 3 of 10 Contents 1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................... 4 1.1 PRODUCT DESCRIPTION ................................................................................................................................................. 4 1.2 EVALUATION SITE .................................................................…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2511003949ER Page: 64 of 107 Report Number :TERF2511003949ER Test Site :SAC 1 Operation Mode :802.11n20 Test Date :2026-01-08 Test Frequency :2457 MHz Temp./Humi. :20.3 °C /49% Test Mode :Bandedge Antenna Pol. :Vertical EUT Pol :H Plane Engineer :WJ Lin Freq. Detector Spectrum Factor Actual Limit Margin Mode Reading Level FS @3m MHz PK/QP/AV dBμV dB dBμV/m dBμV/m dB 2335.97 Peak 54.66 -2.13 52.53 74.00 -21.47 2346.00 Average 45.65 -2.16 43.49 54.00 -10.51 2461.09 Average 99.50 -2.51 96.99 - - 2461.09 Peak 107.27 -2.51 104.76 - - 2483.50 Average 53.21 -2.47 50.74 54.00 -3.26 2483.72 Peak 67.78 -2.47 65.31 74.00 -8.69 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2511003949ER Page: 65 of 107 Report Number :TERF2511003949ER Test Site :SAC 1 Operation Mode :802.11n20 Test Date :2026-01-08 Test Frequency :2457 MHz Temp./Humi. :20.3 °C /49% Test Mode :Bandedge Antenna Pol. :Horizontal EUT Pol :H Plane Engineer :WJ Lin Freq. Detector Spectrum Factor Actual Limit Margin Mode Reading Level FS @3m MHz PK/QP/AV dBμV dB dBμV/m dBμV/m dB 2315.90 Average 45.11 -1.99 43.12 54.00 -10.88 2321.61 Peak 53.69 -2.02 51.67 74.00 -22.33 2463.06 Average 97.08 -2.53 94.55 - - 2463.06 Peak 104.56 -2.53 102.03 - - 2483.50 Average 51.09 -2.47 48.62 54.00 -5.38 2483.50 Peak 63.95 -2.47 61.48 74.00 -12.52 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2511003949ER Page: 66 of 107 Report Number :TERF2511003949ER Test Site :SAC 1 Operation Mode :802.11n20 Test Date :2025-12-30 Test Frequency :2462 MHz Temp.…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2511003949ER Page: 1 of 107 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT EUT Description: Communication Module Applicant: Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Manufacturer: Murata Manufacturing Co., Ltd. Brand Name: Murata Manufacturing Co., Ltd. Model No./ISED HVIN: LBWA0ZZ2JM ISED PMN: LBWA0ZZ2JM Report Number: TERF2511003949ER FCC ID VPYLBWA0ZZ2JM IC: 772C-LBWA0ZZ2JM Date of EUT Received: November 20, 2025 Date of Test: November 24, 2025 ~ January,08 2026 Issue Date: January 21, 2026 Approved By Alex Hsieh We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Central RF Lab The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 and the energy emitted by the sample EUT comply with FCC rule part §15.247, ISED RSS-247. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2511003949ER Page: 2…

Text truncated - open the document above for the full version.