VPYLBEE5WV2GFCommunication Module

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 7, 2024 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: VPYLBEE5WV2GF Murata Manufacturing Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, Murata Electronics North America, Inc. (“the agent”) is our designated U.S. agent for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The agent accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Sincerely, Designated U.S. Agent Information: FRN: 0024753089 Company Name: Murata Electronics North America, Inc. Contact Person: Mark E Tucker Address: 2200 Lake Park Drive Smyrna, GA 30080-7604 United States Tel.: (678)684-2009 Email: [email protected] U.S. Agent Signature: Applicant: FRN: 0017033432 Company Name: Murata Manufacturing Co., Ltd. Contact Person: KENJI HAYASHIKOSHI Address: 10-1, Higashikotari 1-chome Nagaokakyo-shi, Kyoto 617-8555, Japan Tel.: +81-75-955-6173 Email: [email protected] Applicant Signature:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 15, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i)&(ii) Filing FCC ID: VPYLBEE5WV2GF Statement for 47 CFR section 2.911(d)(5)(i) [Murata Manufacturing Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) [Murata Manufacturing Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as a specifically named entity or any of its subsidiaries or affiliates that producing “covered” equipment. Sincerely, Signature: ____________________ Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Date: May 15, 2024 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: VPYLBEE5WV2GF Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of (180) days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Software defined radio & security info ☒ Permanent ------------------ Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: KENJI HAYASHIKOSHI Title: Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Date: May 15, 2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: VPYLBEE5WV2GF To whom it may concern: We, the undersigned, hereby authorize Jim Chang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Agency Agreement Expiration Date: May 15, 2025 This authorization is valid until further written notice from the applicant. Sincerely, Signature: ____________________ Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212) FCC ID: VPYLBEE5WV2GF Items to be covered by modular transmitters. Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, the modular transmitter provides the RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over- modulation. The module and data input(s) are buffered. The EUT has buffered data inputs, it is integrated in IC chip. 3. The modular transmitter must have its own power supply regulation. The module complies the single modular approval request. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(b)(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The modular transmitter meets the FCC antenna Requirements. Instructions are described in Operational Description. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The modular transmitter was testes in a stand-alone configuration. Please see section photographs of test configuration in the test report. 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number in accordance with 15.212 (a)(1)(vi)(A) / (B). Please see exhibition label sample for the FCC ID of this module. And also in the exhibition Users manual, there are instructions gives to the OEM on how to label the end product. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The modular transmitter is compliant with all applicable FCC rules. Details instructions for maintaining compliance are given in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 1.1310, 2.1091, 2.1093, and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance. Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The modular transmitter is compliant with RF exposure requirement. RF exposure is addressed in the RF exposure exhibition. Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above. Name and surname of applicant (or authorized representative): KENJI HAYASHIKOSHI Date:May 15, 2024 Signature: ___________________________

Declaration Date: May 15, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Examiner: We declare that this equipment (Product Name: Communication Module, FCC ID: VPYLBEE5WV2GF) complies with e-CFR Title 47 Part 2.925 (f), as it is too small to be labeled with FCC ID (smaller than 4-6 points). Hence the FCC ID is placed in user manual and packaging instead of being affixed on the equipment. Sincerely, Signature: ____________________ Printed Name /Title: KENJI HAYASHIKOSHI / Senior Manager Company Name: Murata Manufacturing Co., Ltd.

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 15 May 2024 LBEE5WV2GF Label Unit: mm There is no space to describe the FCC ID/ ISED IC Number. Thereforeit is described on the manual and package. CMmarkThis is Murata Trade mark Φ1.5mm 2d Matrix code 14 x 14 cell 1cell = 0.2mm□ ModelNoHightWidthInterval 0.56mm0.42mm0.1mm Inspection NoHightWidthInterval 0.56mm0.42mm0.1mm Direction Mark Φ0.6mm 10.0 0.56 0.42 0.42 0.56 0.56 0.6 2.8 2.8 7.25 0.42 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 15 May 2024 LBEE5WV2GF Package Label Design FCC ID:VPYLBEE5WV2GF IC: 772C-LBEE5WV2GF HVIN:LBEE5WV2GF This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subjectto the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire debrouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Notation requirement areas of other countries. The character size is 4 points or more.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2404000197E5 Page: 1 of 10 RF EXPOSURE REPORT Applicant: Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Manufacturer: Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Product Name: Communication Module Brand Name: muRata Model No.: LBEE5WV2GF Report Number: TESA2404000197E5 FCC ID VPYLBEE5WV2GF IC: 772C-LBEE5WV2GF Date of EUT Received: Feb. 21, 2024 Issue Date: May 31, 2024 Approved By John Yeh We hereby certify that: The above equipment was evaluated by SGS Taiwan Ltd. The evaluation in this report is in compliance with FCC KDB447498D01v06 and RSS-102 Issue 5. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2404000197E5 Page: 2 of 10 Revision History Report Number Revision Description Issue Date Revised By Remark TESA2404000197E5 00 Original May 31, 2024 Kimmy Chiou Note: 1、 The remark "*" indicates modification of the report upon requests from certification body. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2404000197E5 Page: 3 of 10 Contents 1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................... 4 1.1 PRODUCT DESCRIPTION ................................................................................................................................................. 4 1.2 EVALUATION SITE......................................................................................…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2404000926E2 Page: 1 of 171 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT Applicant:Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Manufacturer:Murata Manufacturing Co., Ltd. 1-10-1 Higashikotari, Nagaokakyo-shi, Kyoto 617-8555 Japan Product Name:Communication Module Brand Name:muRata Model No.:LBEE5WV2GF Report Number:TERF2404000926E2 FCC IDVPYLBEE5WV2GF IC:772C-LBEE5WV2GF Date of EUT Received:Feb. 21, 2024 Date of Test: Apr. 10, 2024～ May 13, 2024 Issue Date:Jun. 04, 2024 Approved By Aken Huang We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Central RF Lab The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10:2013 and the energy emitted by the sample EUT comply with FCC rule part §15.247, ISED RSS-247. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.:TERF2404000926E2 Page: 2 of 171 Revision History Report NumberRevisionDescriptionIssue DateRevised ByRemark TERF2404000926E200Original.Jun. 04, 2024Yami Kuo Note: 1、The remark "*" indicates modification of the report upon requests from certification body. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.:TERF2404000926E2 Page: 3 of 171 Table of Contents 1GENERAL INFORMATION...............................................................................................4 2SYSTEM TEST CONFIGURAT…

Text truncated - open the document above for the full version.

KYOCERA AVX’ W3P35x8W04 Family PCB antennas include an embedded Wi-Fi Antenna design with foam on the back side to minimize the detuning of the antenna on different surfaces that delivers on the key needs of today’s wireless product designers: miniaturized design and superior signal sensitivity. Excels in Real-Life Conditions Meets the ever-growing demand for smaller, thinner product designs by eliminating whip and stub antennas. Extensive RF Experience KYOCERA AVX antennas are supported by documentation, and when needed, by the expertise of RF engineers who have integrated hundreds of antenna designs into wireless devices. Global Operations & Design Support KYOCERA AVX’ global operations support an integrated network of design centers that can take projects from concept to production. Part No. W3P35x8W04-U100D3B0A Embedded Wi-Fi Antenna 2.4 / 5.0 / 6.0 GHz Supports: Wi-Fi applications, Agriculture, Bluetooth, Smart Home, Healthcare, Automotive, Digital Signage, Zigbee, WLAN DATASHEET Part No. W3-Family Product: Embedded Wi-Fi Antenna Frequency Band (GHz) 2.40–2.485.15–5.855.925 - 7.125 Return Loss< -15 dB< -10 dB<-6 dB Average Efficiency70 %60 %65 % Peak Gain< 2.3 dBi< 5 dBi< 2.5 dBi Feed Point Impedance50 ohms unbalanced 30/09/2021Proprietary www.KYOCERA-AVX.com Embedded Wi-Fi Antenna Electrical Specifications Typical Characteristics (in reference device housing made in PC/ABS plastic and 100mm cable length) Part NumberW3P35x8W04-U100D3B0A Size (mm) 35.20±0.15 length 8.50±0.15 width 0.40 thickness *Connectoru.fl Compatible *Cable length (mm)100 Weight (grams)0.3 Adhesive3M468MP Packing Individual PE bags (default) or tray (per request) Mechanical Specifications KEY BENEFITS QuickerTime-to-Market Standard part means fewer design changes, and Simple implementation Superior Network Coverage Better network coverage means more reliable wireless connections Faster Data Rates Improved performance also means faster data rates for downloading e-mail, surfing the internet and watching mobile video RoHS Compliant Products are the latest RoHS version compliant APPLICATIONS •Access Points and Routers •Gateways •Wi-Fi applications •M2M industrial devices AP, Routers, Gateways 2.4 / 5.0 / 6.0 GHz *Additional variations available in different cable lengths, colors and connectors, refer to Appendix on page 4. © 2021 KYOCERA AVX tel +(1) 858.550.3820 email:[email protected] Typical Return Loss & Efficiency Plots Measured in reference device housing made in PC/ABS plastic and 100mm cable length Wi-Fi 2.4 / 5.0 / 6.0 GHz Embedded antenna specifications KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs DATASHEET |Part No. W3P35x8W04-U150D3B0A -40 -30 -20 -10 0 240024102420243024402450246024702480 R e t u r n L o s s ( d B ) Frequency (MHz) 0 10 20 30 40 50 60 70 80 90 100 240024102420243024402450246024702480 E f f i c i e n c y ( % ) Frequency (MHz) -40 -30 -20 -10 0 5150 5275 5400 5525 5650 5775 5900 6025 6150 6275 6400 6525 6650 6775 6900 7025 7150 R e t u r n L o s s ( d B ) Frequency (MHz) 0 10 20 30 40 50 60 70 80 90 100 5150 5275 5400 5525 5650 5775 5900 6025 6150 6275 6400 6525 6650 6775 6900 7025 7150 E f f i c i e n c y ( % ) Frequency (MHz) 2.4 GHz Return Loss 2.4 GHz Efficiency 5 GHz & 6GHz Efficiency 5 GHz & 6GHz Return Loss © 2021 KYOCERA AVX tel +(1) 858.550.3820 email:[email protected] Wi-Fi 2.4 / 5.0 / 6.0 GHz embedded antenna specifications KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs DATASHEET |Part No. W3P35x8W04-U100D3B0A Antenna Radiation Patterns Typical Performances in reference device housing made in PC/ABS plastic and 100mm cable length M e a s u r e d a t 2 4 5 0 M H z M e a s u r e d a t 5 5 5 0 M H z W3P35x8W04-U100D3B0A PC/ABS 100 mm cable length z x y z y x © 2021 KYOCERA AVX tel +(1) 858.550.3820 email:[email protected] Wi-Fi 2.4 / 5.0 / 6.0 GHz Embedded antenna specifications KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs DATASHEET |Part No. W3P35x8W04-U100D3B0A Antenna Radiation Patterns Typical Performances in reference device housing made in PC/ABS plastic and 100mm cable length M e a s u r e d a t 6 5 2 0 M H z W3P35x8W04-U100D3B0A PC/ABS 100 mm cable length z x y z y x © 2021 KYOCERA AVX tel +(1) 858.550.3820 email:[email protected] Generic Antenna Part Numbers KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Below are the generic standard antenna part numbers for Wi-Fi DATASHEET |Part No. W3-Family - APPENDIX PN Nomenclature PCB silk screen number Example of generic Wi-Fi PN:W3P35x8W04-U100D3B0A PN Nomenclature Second part of the PN © 2021 KYOCERA AVX tel +(1) 858.550.3820 email:[email protected] Generic Antenna Part Numbers KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs. Below are the generic standard antenna part numbers for Wi-Fi DATASHEET |Part No. W3-Family - APPENDIX Part NumberType Tuning version Connector Cable length (mm) Mounting Options W3P35X8W04-U050D3B0A PCB Tuning on Plastic Wall u.fl compatible 50 Using Adhesive 3M468MP W3P35X8W04-U100D3B0A 100 W3P35X8W04-U150D3B0A 150 W3P35X8W04-H100D3B0A MHF4100 W3P35X8F04-U050D3B0T Tuning for foam on plastic wall u.fl compatible 50 Using Adhesive 3M9448A W3P35X8F04-U100D3B0T 100 W3P35X8F04-U150D3B0T 150 W3F35X8W01-U100D3B0CFPC Tuning on Plastic Wall u.fl compatible 100 Using Adhesive 3M467 Typical Ordering Part Numbers Mechanical Dimensions L Part NumberA (mm)B (mm)C (mm)L (m…

Text truncated - open the document above for the full version.