VPYLB1VY934Communication module

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC FCC ID:VPYLB1VY934 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This devicecomplies with below part 15 of FCC Rules. Part 15 Subpart C Part 15 Subpart E The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. This module designed for mounting inside of the end productby us professionally. Therefore, it complies with the antenna and transmission system requirements of §15.203. Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. This module needs to supply a regulated voltage from host device. 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC This manual is based on KDB 996369, which is designed to ensure that module manufacturer correctly communication the necessary information to host manufacturers that incorporate their modules. INTEGRATION INSTRUCTIONS 1. General: Applicable Sections 2 through 10 describe the items that must be provided in the integration instructions for host product manufacturers(e.g., OEM instruction manual) to use when integrating a module in a host product. This Modular transmitter applicant(muRata) should include information in their instructions for all these items indicating clearly when they are not applicable. 2. List of applicable FCC rules: Applicable This devicecomplies with below part 15 of FCC Rules. Part 15 Subpart C Part 15 Subpart E 3 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC 3. Summarize the specific operational use conditions : Applicable 4. Limited module procedures : Applicable This module designed for mounting inside of the end productby us professionally. Therefore, it complies with the antenna and transmission system requirements of §15.203. This module needs to supply a regulated voltage from host device. Since there is no space which indicates FCC ID on this module, FCC ID is indicated in a manual. If the FCC ID is not visible when the module is installed inside another device, then the module is installed must also display a label referring to the enclosed module. 4 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC 5. Trace antenna designs : Applicable Please perform the Trace antenna design that followed the specifications of the antenna. The concrete contents of a check are the following three points. １）It is the same type as the antenna type of antenna specifications. Confirm the same size as the Gerber file. ２）An antenna gain is lower than a gain given in antenna specifications. Measure the gain, and confirm the peak gain is less than the application value. ３）The emission level is not getting worse. Measure the spurious, and confirm degradation of less than 3dB than spurious value of worst of report used for the application. Howeverit is spurious defined below. Please send those reports to Murata. And pleasereferAntenna in Section 6 of the installation manual. 5 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC 6. RF exposure considerations : Applicable This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. When the host is a portable device, it is necessary to take a SAR test with your set mounting this module. (except to use only Bluetooth LE or 2.4GHz-WLAN) Class II permissive change application is necessary using the SAR report. Please contact Murata (www.murata.com). And an application for a Class II permissive change from a Mobile equipment to a Portable equipment is also required. 6 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC Antenna PortAntenna model NameAntenna TypeconnectorAntenna Gain Chain0Antenna0 1VY DC1231[2.4GHz] Monopole antennaN/A+2.0 dBi [5GHz] Monopole antennaN/A+1.9 dBi Chain1Antenna1 1VY DC1231[2.4GHz] Monopole antenna (RF cable: 30 ~ 315 mm) I-PEX: 20449-001E *1 +2.0 ~ +1.4 dBi [5GHz] Monopole antenna (RF cable: 30 ~ 315 mm) I-PEX: 20449-001E *1 +1.3 ~ -1.3 dBi 7. Antennas: Applicable *1: The connector is present, but the feed point is the soldered land portion of the module's RFOUT terminal 7 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 07 February 2023 Type1VY-934 User Manual for FCC 8. Label and compliance information : Applicable The following statements must be described on the user manual of the host device of this module; or Contains Transmitter Module FCC ID:VPYLB1VY934Contains FCC ID: VPYLB1VY934 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Compliance with FCC require…

Text truncated - open the document above for the full version.

CFR 47 §2.911 (d)(5) Attestation Date: 02-07-2023 FCC ID: VPYLB1VY934 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA Murata Manufacturing Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Murata Manufacturing Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Kenji Hayashikoshi Job Title: Senior Manager Company Name: Murata Manufacturing Co., Ltd.

CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Date: June 22, 2023 FCC ID: VPYLB1VY934 Grantee FRN: 0017033432 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA FCC US Agent Agent Company Name: Murata Electronics North America, Inc. FRN: 0024753089 Agent US Address: 2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. Agent Contact Person: Mark Tucker Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Murata Manufacturing Co., Ltd. (“the applicant”) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Signature: Mark Tucker Murata Electronics North America, Inc.

CFR 47 §2.911 (d)(7) Agent Designation Attestation Date: June 22, 2023 FCC ID: VPYLB1VY934 Grantee FRN: 0017033432 To: Federal Communications Commission 45 L Street NE Washington, DC 20554 USA Murata Manufacturing Co., Ltd. (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. US Agent Information: Agent Company Name: Murata Electronics North America, Inc. FRN: 0024753089 Agent US Address: 2200 Lake Park Drive, Smyrna, GA 30080-7604, USA. Agent Contact Person: Mark Tucker Agent Email Address: [email protected] Sincerely yours, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Letter of Authorization Date: December 23, 2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: Murata Manufacturing Co., Ltd. FCC ID: VPYLB1VY934 To whom it may concern: We, the undersigned, hereby authorize Shuichi Ohyama of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Limited Modular Transmitter Approval February 1, 2023 FCC ID : VPYLB1VY934 Applicant : Murata Manufacturing Co., Ltd. This transmitter, model: Type1VY-934 is designed by us. It complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below: Modular Approval Checklist: Modular approval requirement Yes No (1) Have its own RF shielding. (2) Have buffered modulation/data inputs. (3) Have its own power supply regulation. This module has the power supply regulator. However the one of input voltages to RF part don’t go through the regulator. The stable voltage will be supplied by end product. Therefore end product will be required to have the power supply regulator. (4) Comply with the antenna and transmission system requirements of § 15.203, 15.204(b) and 15.204(c). (5) Tested in a stand-alone configuration. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available. (6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. Since this module is so small to label with a font size that is four- points or larger and it does not utilize electronic labeling, the FCC ID is placed in the user manual and the packaging according to KDB784748. (7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. (8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Request for Confidentiality Date: December 23, 2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant : Murata Manufacturing Co., Ltd. FCC ID : VPYLB1VY934 To whom it may concern: Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459: Block Diagram Theory of Operation Schematics The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Type1VY-934 ExternalPhoto

Type1VY-934Labeldesign Due to its small size, it is not possible to display the FCC ID or IC Number on the module. Therefore, they are indicated in manuals and packaging materials. 1. Display on module 2. Display on package XXXXXXX XXXXXXX XXXXXXX Rxxx-xxxxxx FCC ID: VPYLB1VY934 IC:772C-LB1VY934 HVIN: Type1VY-934

Date: December 23, 2022 Federal Communications Commission 45 L Street NE Washington, DC 20554 FCC ID : VPYLB1VY934 Applicant : Murata Manufacturing Co., Ltd. To whom it may concern: Since this module is so small to label with a font size that is four-points or larger and it does not utilize electronic labeling, the FCC ID is placed in the user manual and the packaging according to KDB784748. For the details, please refer to the other “Label and Location” document(s) and “External Photo”. Sincerely Yours, Kenji Hayashikoshi Murata Manufacturing Co., Ltd.

Type1VY-934 InternalPhoto

1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 Type1VY-934 Installation Manual FCC ID of this product is as follows. FCC ID: VPYLB1VY934 IC No. of this product is as follows. IC: 772C-LB1VY934 Contents 1.Land Pattern (Recommended) 2.PIN Layout 3.Supply Voltage 4.Power Levels 5.Theory of operation 6. Antenna 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 1.Land Pattern TOP View (Recommended) Unit : mm 3 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 2.PIN Layout 4 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 3.Supply Voltage *VDD_3P3, SWREG_INandVDD_FEM needs to supply a regulated voltage from host device. *VDDIO_GPIO and VDDIO_AO don’t influence the RF characteristic. Type1VY_PIN_Na me Min.Typ.Max.unit VDD_3P33.1353.33.465V SWREG_IN3.1353.33.465V VDD_FEM3.1353.33.465V VDDIO_GPIO *3.14 1.71 3.3 1.8 3.46 1.89 V VDD_AO *3.14 1.71 3.3 1.8 3.46 1.89 V 5 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 4. Power Levels modeRateChannel MAXIMUMTUNE UP TOLERANCE [dBm] IEEE 802.11b IEEE 802.11g IEEE 802.11n (HT20) AllRate1~119.5 IEEE 802.11a IEEE 802.11n (HT20/40) IEEE 802.11ac (VHT20/40/80) All Rate (W52/W53) 36~64 (W56) 100~144 (W58) 149~165 9.5 Mode MAXIMUMTUNE UP TOLERANCE [dBm] LE7.9 (Per Antenna port) 6 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 5. Theory of Operation Frequency of operationScanAd-hoc mode 2.4GHz11b/g/n (HT20)2412-2462MHzActiveYes W5211a/n/ac ((V)HT20)5180-5240MHzActiveYes 11n/ac ((V)HT40)5190-5230MHzActiveYes 11ac (VHT80)5210MHzActiveYes W5311a/n/ac ((V)HT20)5260-5320MHzPassiveNo 11n/ac ((V)HT40)5270-5310MHzPassiveNo 11ac (VHT80)5290MHzPassiveNo W5611a/n/ac ((V)HT20)5500-5720MHz (*ISED:5600-5650MHz disable) PassiveNo 11n/ac ((V)HT40)5510-5710MHz (*ISED:5600-5650MHz disable) PassiveNo 11ac (VHT80)5530-5690MHz (*ISED:5600-5650MHz disable) PassiveNo W5811a/n/ac ((V)HT20)5745-5825MHzActiveYes 11n/ac ((V)HT40)5755-5795MHzActiveYes 11ac (VHT80)5775MHzActiveYes End users can not modify the software because F/W & driver are installed in device. 7 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 6.Antenna ■Please perform the antenna design that followed the specifications of the antenna. ■About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. １）It is the same type as the antenna type of antenna specifications. ２）An antenna gain is lower than a gain given in antenna specifications. ３）The emission level is not getting worse. 8 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 6.Antenna ■Use the antenna below. < Chain0 > (Main Antenna) •Pattern on Board •Part number: Antenna0 1VY DC1231 •Use the following design on your board to build your antenna. Line width = 0.5mm 6.05 7.1 6.3 4.35 0.5 1.1 7.15 6.65 1.4 6.475 1.1 0.3 4.84 0.3 2.2 4.375 1.825 2.25 0.5 width 0.3 1.5 0.5 0.6 0.75 A sub-antenna is connected here. Pin name: ANT1 Pin name: ANT0 RF line-GND layer thickness ・Sub antenna: 215um * Design the RF line at 50 ohms. (Connector P/N: 20449-001E [maker: I-PEX]) 9 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 6.Antenna ■Use the antenna below. < Chain1> (Sub Antenna) •Pattern on flexible substrate + RF cable (External antenna) •Part number: Antenna1 1VY DC1231 (* including cable) •Cables length : from 30 to 315mm are available. 7.395 Unit: mm 6.7 6.3 10.3 9.4 6.05 10.0 4.45 10.1 2.275 2.55 1.36 1.5 1.25 cable joint Line width = 0.5mm (Connector P/N: 20449-001E [maker: I-PEX]) RF line-GND layer thickness ・Sub antenna: 38.5um * Design the RF line at 50 ohms. 10 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 31 January 2023 P/NMemoTuning 1Tuning 2Tuning 3Tuning 4 Matching circuit Shunt 1Series 1Shunt 2Series 2Shunt 3Series 3Shunt 4 Antenna0 1VY DC1231Pattern Antenna0ohm0.3pFNoneNone820ohm5.6ohm820ohm0ohmNone1.1nH0.2pF Antenna1 1VY DC1231 Sub Antenna (Cable length = 30mm) 4.7nH0.5pF0.1pF0.1pF1kohm4.7ohm1kohm0ohmNone1.0nH0.3pF Sub Antenna (Cable length = 315mm) 4.7nH0.5pF0.1pF0.1pF680ohm6.8ohm680ohm0ohmNone1.0nH0.3pF Shunt1 Series 1 Tuning 1 Tuning 2 Tuning 3 Tuning 4 Shunt2 Shunt4 Shunt3 Series 2 Series 3 Tuning 1 Tuning 3 Tuning 4 Tuning 2 Shunt1 Shunt3 Shunt4 Series 1 Shunt2 Series 2 Series 3 Series 4 Shunt5 Shunt6 Recommended constant 6.Antenna

UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com February 15, 2023 FCC ID: VPYLB1VY934 To whom it may concern, We, UL Japan, Inc, hereby declare that Communication Module, model: Type1VY-934 (FCC ID: VPYLB1VY934) of Murata Manufacturing Co., Ltd. is exempt from RF exposure SAR evaluation because the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula according to the Code of Federal Regulation title 47 section 1.1307(b)(3)(i)(B). This method is used at separation distances d (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive) for single RF sources. P th is given by: 푃 ௧௛ ሺ mW ሻ ൌ൜ 퐸푅푃 ଶ଴ ୡ୫ ሺ푑 / 20 cmሻ ௫ 퐸푅푃 ଶ଴ ୡ୫ 푑൑20 cm 20 cm ൏ 푑 ൑ 40 cm Where 푥ൌെlog ଵ଴ ቆ 60 퐸푅푃 ଶ଴ ୡ୫ ඥ 푓 ቇand 푓 is in GHz 퐸푅푃 ଶ଴ ୡ୫ ሺ mW ሻ ൌቊ 2040푓 3060 0.3 GHz൑푓൏1.5 GHz 1.5 GHz൑푓൑6 GHz When the minimum separation distance is shorter than 0.5 cm, 0.5 cm is applied. The SAR evaluation exemption threshold is calculated as below. [WLAN 2.4 GHz band part] Pth (mW )3060(d Bm)11.93 f (GHz)2.462(mW )15.61 ERP 20 cm (mW )30602.00 d (cm)20.013.93 (d Bm)11.79 (mW )15.2 The Maximum time-averaged power or ERP whichever greater is 15.61 mW. Conducted Power Antenna Gain (dBi) EIRP (d Bm) ERP UL Japan, Inc. Ise EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8999 / F:: +81.596.24.8124 / W:: japan.ul.com [WLAN 5 GHz band part] Pth (mW )3060(d Bm)11.63 f (GHz)5.825(mW )14.56 ERP 20 cm (mW )30601.90 d (cm)20.013.53 (d Bm)11.39 (mW )13.8 The Maximum time-averaged power or ERP whichever greater is 14.56 mW. Conducted Power Antenna Gain (dBi) EIRP (d Bm) ERP [Bluetooth Low Energy part] Pth (mW )3060(d Bm)7.88 f (GHz)2.48(mW )6.14 ERP 20 cm (mW )30602.00 d (cm)20.09.88 (dBm)7.74 (mW )6 The Maximum time-averaged power or ERP whichever greater is 6.14 mW. Conducted Power Antenna Gain (dBi) EIRP (d Bm) ERP Transmitters used in mobile exposure conditions for simultaneous transmission operations according to KDB447498 D04. Value is calculated using the following formula according to the Code of Federal Regulation title 47 section 1.1307(b)(3)(ii)(B). [WLAN 2.4 GHz and Bluetooth LE] 15.61/3060 + 6.14/3060 = 0.0051 + 0.0020 = 0.0071<1 [WLAN 5 GHz and Bluetooth LE] 14.56/3060 + 6.14/3060 = 0.0048 + 0.0020 = 0.0068<1 Thank you for your attention to this matter. Takumi Shimada Engineer

1 murata.comCopyright © Murata Manufacturing Co., Ltd. All rights reserved.06 February 2023 1 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. Type1VY-934 Antenna Under Test Report 2 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 1. Test method for antenna gain measurement 2. Test Equipment (Details of SG32) 3. DUT placement status 4. DUT Appearance 5. Measurement direction 6. Measurement result Index 3 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 1. Test method for antenna gain measurement •Test method for antenna gain measurement: Standard antenna method (comparative method) * Comparing a measured antenna to a standard antenna with a known gain factor •Equipment used for antenna gain measurement (model name, serial number, calibration date, etc.); -Measurement system Microwave Vision Group (former SATIMO) SG32 (details next page) -Equipment PAC (MW 000021H-0068) E4438C (MY45090139) E4428C (MY45280466) -Calibration date October 25, 2022 -Antenna gain measurement date / Measurement person November 25, 2022 / Harumi Matsuoka 4 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 2. Test Equipment (Details of SG32) Peak gain variation is secured within ±0.75 dB by system calibration. Anechoic chamber sizeApproximately 3.5m x 3.5m x 3m (H) Frequency band 800~6000MHz (18~40GHz compatible with Option) Measurement time Elevation 1 cutReal time Global surface measurement < Approx. 20 seconds (when measuring 10 frequencies) Measurement uncertainty Peak gain < +/-0.75dB (1.0~6.0GHz) < +/-1.0dB (0.8~1.0GHz) Low gain< +/-2dB (@-20dB from peak) Dynamic range70dB Cross Polar Isolation> 45dB DUT size 0.8 GHz1.8 GHz2.5 GHz6 GHz 75 cm75 cm65 cm30 cm 5 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 3. DUT placement status 6 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 4. DUT Appearance 30.0 UNIT : mm 195.0 Main Antenna Sub Antenna 315.0 25.5 15.5 Cable length=30mm Cable length=315mm <Condition 1> <Condition 2> 7 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL 5. Measurement direction 0 90 180 270 Y(90degree) X(0degree) Y(90degree) Z(0degree) X(90degree) Z(0degree) 0 90 180 270 XY plane YZ plane ZX plane 0 90 180 270 2D Directionalindication Horizontal Vertical XY plane YZ plane ZX plane ViewViewView 8 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL HOR. VER. HOR. VER. HOR. VER. MAX -2.2 -0.8 MAX 1.6 -16.9 MAX 2.0 -3.0 AVE -7.1 -4.1 AVE -3.3 -23.1 AVE -4.7 -4.5 -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical XY plane XY plane XY plane XY plane ZX plane YZ plane [dBi] [dBi] [dBi] 6. Measurement result Chain0 : Pattern Antenna Part number: Antenna0 1VY DC1231 @2484MHz @5500MHz <Efficiency> <Directivity> *Red color shows peak gain HOR.VER.HOR.VER.HOR.VER. MAX -3.5-1.0 MAX 0.4-14.8 MAX 1.9-3.3 AVE -9.3-4.7 AVE -4.3-21.6 AVE -5.8-8.0 -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical XY planeXY planeXY plane XY planeZX planeYZ plane [dBi][dBi][dBi] [dBi][dB] Total hor.ver.hor.ver.hor.ver.Efficiency MAX.-3.8-2.50.8-13.51.4-2.4 AVE.-9.8-6.3-4.6-21.1-6.0-7.7-3.2 MAX.-3.5-1.00.4-14.81.9-3.3 AVE.-9.3-4.7-4.3-21.6-5.8-8.0-2.7 MAX.-3.1-2.70.6-14.20.2-0.6 AVE.-8.1-4.9-4.1-20.6-6.5-6.5-3.0 5850MHz LINEAR XY-planeYZ-planeZX-plane POLAMIZATION 5150MHz 5500MHz [dBi] [dB] Total hor. ver. hor. ver. hor. ver. Efficiency MAX. -2.4 -1.5 1.3 -18.1 1.5 -3.3 AVE. -7.0 -4.0 -3.9 -24.1 -4.8 -4.5 -2.3 MAX. -2.5 -1.2 1.3 -17.2 1.8 -3.1 AVE. -7.1 -4.2 -3.7 -23.4 -4.8 -4.5 -2.3 MAX. -2.2 -0.8 1.6 -16.9 2.0 -3.0 AVE. -7.1 -4.1 -3.3 -23.1 -4.7 -4.4 -2.0 2442 MHz 2484 MHz POLAMIZATION 2400 MHz LINEAR XY-plane YZ-plane ZX-plane 9 Copyright © Murata Manufacturing Co., Ltd. All rights reserved. CONFIDENTIAL Chain1 (condition 1) : Sub Antenna (Cable length = 30mm) Part number: Antenna1 1VY DC1231 (30mm) @2400MHz @5150MHz <Efficiency> <Directivity> *Red color shows peak gain [dBi][dB] Total hor.ver.hor.ver.hor.ver.Efficiency MAX.1.3-6.00.4-16.2-2.6-3.5 AVE.-5.4-11.0-4.9-20.9-10.5-8.1-4.2 MAX.-3.0-4.10.1-15.9-5.9-4.2 AVE.-8.5-9.0-4.2-21.4-12.8-7.4-4.1 MAX.-1.7-4.7-1.4-15.7-6.8-1.7 AVE.-7.5-9.0-6.5-22.6-13.8-6.6-5.5 5850MHz LINEAR XY-planeYZ-planeZX-plane POLAMIZATION 5150MHz 5500MHz [dBi] [dB] Total hor. ver. hor. ver. hor. ver. Efficiency MAX. -1.2 -4.8 2.0 -17.4 -0.5 -0.4 AVE. -6.5 -7.5 -4.2 -20.2 -6.9 -3.7 -2.7 MAX. -1.5 -5.4 1.9 -17.1 -0.7 -0.4 AVE. -6.8 -7.6 -4.2 -20.3 -7.2 -4.0 -2.9 MAX. -1.8 -6.1 1.7 -16.0 -0.8 -0.2 AVE. -7.0 -7.6 -4.2 -19.6 -7.4 -3.9 -2.9 2442 MHz 2484 MHz POLAMIZATION 2400 MHz LINEAR XY-plane YZ-plane ZX-plane HOR.VER.HOR.VER.HOR.VER. MAX 1.3-6.0 MAX 0.4-16.2 MAX -2.6-3.5 AVE -5.4-11.0 AVE -4.9-20.9 AVE -10.5-8.1 -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical XY planeXY planeXY plane XY planeZX planeYZ plane [dBi][dBi][dBi] HOR. VER. HOR. VER. HOR. VER. MAX -1.2 -4.8 MAX 2.0 -17.4 MAX -0.5 -0.4 AVE -6.5 -7.5 AVE -4.2 -20.2 AVE -7.0 -3.7 -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical -30 -25 -20 -15 -10 -5 0 5 0 30 60 90 120 150 180 210 240 270 300 330 horizontal vertical XY plane XY plane XY plane XY plane ZX plane YZ pl…

Text truncated - open the document above for the full version.

Test Report No. : 14524536H-C-R1 Page : 1 of 24 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 RADIO TEST REPORT Test Report No.: 14524536H-C-R1 Customer Murata Manufacturing Co., Ltd. Description of EUT Communication Module Model Number of EUT Type1VY-934 FCC ID VPYLB1VY934 Test Regulation FCC Part 15 Subpart E Test Result Complied (Refer to SECTION 3) Issue Date February 9, 2023 Remarks DFS test only Client without radar detection Representative test engineer Approved by Takafumi Noguchi Engineer Takumi Shimada Engineer CERTIFICATE 5107.02 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan, Inc. There is no testing item of "Non-accreditation". Re port Cover Page - Form-ULID-003532 (DCS:13-EM-F0429) Issue# 21.0 Test Report No. : 14524536H-C-R1 Page : 2 of 24 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 ANNOUNCEMENT REVISION HISTORY Original Test Report No.: 14524536H-C This report is a revised version of 14524536H-C. 14524536H-C is replaced with this report. Revision Test Report No. Date Page Revised Contents - (Ori ginal) 14524536H-C November 30, 2022 - 1 14524536H-C-R1 February 9, 2023 Section 2.2: Radio Specification for WLAN (IEEE802.11b/11g/11n-20) and Bluetooth (Low Energy) -Collection of item name Antenna Gain→Antenna Type 1 14524536H-C-R1 February 9, 2023 Section 2.2: Radio Specification for Bluetooth (Low Energy) -Deletion of information for PCB Antenna  This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc.  The results in this report appl y only to the sample tested. (Laboratory was not involved in sampling.)  This sample tested is in compliance with the limits of the above re gulation.  The test results in this test report are traceable to the national or international standards.  This test report must not be used by the customer to claim product certification, approval, or endorsement by the A2LA accreditation bod y.  This test report covers Radio technical requirements. It does not cover administrative issues such as Manual or non-Radio test related Requirements. (if applicable)  The all test items in this test report are conducted b y UL Japan, Inc. Ise EMC Lab.  The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan, Inc. has been accredited.  The information provided from the custome r for this report is identified in Section 1.  For test report(s) referred in this report, the latest version (including any revisions) is always referred. Test Report No. : 14524536H-C-R1 Page : 3 of 24 UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 Japan / +81-596-24-8999 Reference: Abbreviations (Including words undescribed in thi…

Text truncated - open the document above for the full version.