VPYLBSN460Communication Module

LBWA1ZZSNE-460 User Manual FCC ID of this product is as follows. FCC ID: VPYLBSN460 For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to incl ude the following st atements required by FCC on the product and in the Installation manual Notice. Notice Please describe the following warning on the fi nal product which cont ains this module. Contains Transmitter Module FCC ID:VPYL BSN460 or Contains FCC ID:VPYLBSN460 This device complies with part 15 of the FCC Rule s. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2 ) this device must accept any interference received, including interfer ence that may cause undesired operation. 2014/1/30 Please describe the following warning to the manual. Please describe the following warning to the manual. FCC CAUTIONChanges or modifications not expressly approved by the party respon sible for compliance could void the user’s authority to operate the equipment.authority to operate the equipment.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When installing it in a mobile equipment This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Expo sure Guidelines. This equipment should be installed and operated keeping the radiator at le ast 20cm or more away from person’s body. When installing it in a portable equipment When installing it in a portable equipment The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, howeve r, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the low power wireless devices. There is no proof, howeve r, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high lev els of RF can produce health effects (by heating tissue), exposure of low-level RF that does no t produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological ef fects might occur, but such findings have not Some studies have suggested that some biological ef fects might occur, but such findings have not been confirmed by additional research. LBWA1ZZSNE-460h as been tested and found to comply with FCC radiation exposure limits set forth for an u ncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between hum an body and antenna exceeded 20cm.

LBWA1ZZSNE-460External photos Height 2.7mm Weight 2.5g Weight 2.5g 31.0mm Module(Top) 1/5 2014/1/31 LBWA1ZZSNE-460 External photos Module(Back) 2/5 2014/1/31 LBWA1ZZSNE-460 External photos Module(Top---Bird’s-eyes view) 3/5 2014/1/31 LBWA1ZZSNE-460 External photos Module(Back --- Bird’s - eyes view) Module(Back --- Bird’s - eyes view) 4/5 2014/1/31

2014/2/7 FCC ID: VPYLBSN460 Label design to FCC 1 70mm 220mm

LBWA1ZZSNE-460 Internal photos Module(Top) 5/5 2014/1/31

Test report No. : 10180434H-B-R1 Page : 2 of 50 FCC ID : VPYLBSN460 Issued date : February 7, 2014 Revised date : February 13, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 REVISION HISTORY Original Test Report No.: 10180434H-B Revision Test report No. Date Page revisedContents - (Original) 10180434H-B February 7, 2014 - - 1 10180434H-B-R1 February 13, 2014P.12 The explanation about a host device was added to Section 6. 1 10180434H-B-R1 February 13, 2014P.15 “(2)Simulated Tissue Liquid Parameter confirmation” in Section 9.1 was corrected. 1 10180434H-B-R1 February 13, 2014P.36 to P.37“Decision on Simulated Tissues” was deleted. 1 10180434H-B-R1 February 13, 2014P.21 Table of “1. System validation result Body 2450MHz” was corrected. Test report No. : 10180434H-B-R1 Page : 3 of 50 FCC ID : VPYLBSN460 Issued date : February 7, 2014 Revised date : February 13, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information .................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ...................................................................................... 4 2.1 Identification of E.U.T. ....................................................................................................................................... 4 2.2 Product description ............................................................................................................................................. 4 SECTION 3 : Test standard information ............................................................................................ 5 3.1 Test Specification ............................................................................................................................................... 5 3.2 Procedure ............................................................................................................................................................ 5 3.3 Exposure limit .................................................................................................................................................... 6 3.4 Test Location ...................................................................................................................................................... 6 SECTION 4 : Test result ....................................................................................................................... 7 4.1 Stand-alone SAR result....................................................................................................................................... 7 SECTION 5 : Description of the operating mode ............................................................................... 8 5.1 Output power operating modes ........................................................................................................................... 8 5.2 Output power measurement results ..................................................................................................................... 9 5.3 SAR testing operating modes ............................................................................................................................. 10 5.4 Confirmation after SAR testing .......................................................................................................................... 11 SECTION 6 SAR test exclusion considerations .................................................................................. 12 6.1 Standalone SAR test exclusion considerations ................................................................................................... 12 SECTION 7: Description of the Body setup ........................................................................................ 13 7.1 Test position for Body setup ............................................................................................................................... 13 SECTION 8 : Test surrounding ........................................................................................................... 14 8.1 Measurement uncertainty ................................................................................................................................... 14 SECTION 9 : Measurement results ..................................................................................................... 15 9.1 WLAN Body SAR (2.4G) .................................................................................................................................. 15 SECTION 10 Test instruments ............................................................................................................. 16 APPENDIX 1 : SAR Measurement data ............................................................................................. 17 1. Evaluation procedure ................................................................................................................................. 17 2. Measurement data ...................................................................................................................................... 18 APPENDIX2 : System Validation ........................................................................................................ 21 1. System validation result Body 2450MHz .................................................................................................. 21 2. System Validation Dipole (D2450V2,S/N:713) ......................................................................................... 23 3. Validation uncertainty................................................................................................................................ 31 APPENDIX 3 : System specifications …

Text truncated - open the document above for the full version.

Test report No. : 10180434H-A-R1 Page : 2 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 REVISION HISTORY Original Test Report No.: 10180434H-A Revision Test report No. Date Page revised Contents - (Original) 10180434H-A February 6, 2014 - - 1 10180434H-A-R1 February 12, 2014 8 Correction of power setting information Test report No. : 10180434H-A-R1 Page : 3 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ......................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ........................................................................................... 4 SECTION 3: Test specification, procedures & results ............................................................................ 5 SECTION 4: Operation of E.U.T. during testing .................................................................................... 8 SECTION 5: Conducted Emission .......................................................................................................... 11 SECTION 6: Radiated Spurious Emission ............................................................................................ 12 SECTION 7: Antenna Terminal Conducted Tests ................................................................................ 13 APPENDIX 1: Data of EMI test .............................................................................................................. 14 Conducted Emission ......................................................................................................................... 14 6dB Bandwidth ................................................................................................................................. 16 Maximum Peak Output Power .......................................................................................................... 18 Average Output Power ...................................................................................................................... 19 Radiated Spurious Emission ............................................................................................................. 20 Conducted Spurious Emission .......................................................................................................... 24 Power Density ................................................................................................................................... 25 99%Occupied Bandwidth ................................................................................................................. 27 APPENDIX 2: Test instruments ............................................................................................................. 28 APPENDIX 3: Photographs of test setup ............................................................................................... 30 Conducted Emission ......................................................................................................................... 30 Radiated Spurious Emission ............................................................................................................. 31 Worst Case Position (Horizontal: Y-axis/ Vertical:Z-axis) .............................................................. 32 Test report No. : 10180434H-A-R1 Page : 4 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : Murata Manufacturing Company, Ltd. Address : 10-1, Higashikotari 1-chome, Nagaokakyo-shi, Kyoto 617-8555 Japan Telephone Number : +81-75-955-6375 Facsimile Number : +81- 75-955-6634 Contact Person : Takaharu Kawakatsu SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Communication Module Model No. : LBWA1ZZSNE-460 Serial No. : Refer to Section 4, Clause 4.2 Rating : DC3.3V Receipt Date of Sample : January 8, 2014 Country of Mass-production : Japan Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description Radio Specification Radio Type : Transceiver Frequency of Operation : 2412-2462MHz Modulation : DSSS Power Supply (radio part input) : DC1.8V/3.3V Antenna type : Chip Antenna Antenna Gain : 0.45dBi Test report No. : 10180434H-A-R1 Page : 5 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2013, final revised on September 30, 2013 and effective October 30, 2013 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz 3.2 Procedures and results Item Test Procedure Specification Worst margin Results Remarks Conducted Emission FCC: ANSI C63.4:2003 7. AC powerline Conducted Emission measurements FCC: Section 15.207 QP 5.1dB, 5.86945MHz, L AV 5.5dB, 5.86945MHz, L Complied - IC: RSS-Gen 7.2.4 IC: RSS-Gen 7.2.4 6dB Bandwidth FCC: "Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247(issued on …

Text truncated - open the document above for the full version.

Test report No. : 10180434H-A-R1 Page : 30 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Conducted Emission Photo 1 Photo 2 Test report No. : 10180434H-A-R1 Page : 31 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Radiated Spurious Emission Photo 1 Photo 2 Test report No. : 10180434H-A-R1 Page : 32 of 32 Issued date : February 6, 2014 Revised date : February 12, 2014 FCC ID : VPYLBSN460 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst Case Position (Horizontal: Y-axis/ Vertical:Z-axis) X-axis Y-axis Z-axis End of Report

Test report No. : 10180434H-B-R1 Page : 48 of 50 FCC ID : VPYLBSN460 Issued date : February 7, 2014 Revised date : February 13, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 APPENDIX 4: Photographs of test setup 1. Photographs of EUT 2. Information of host device Front Rear T ype of Equipment Body composition monitor Model Number HBF-218W Serial Number AAENChcuTQAAAEHA Condition of EUT Production prototype (*Not for sale: This sample is equivalent to mass-produced items.) Receipt Date of Sample January 8, 2014 Country of Mass-production China Rating DC6V Alkaline Battery (Size AAA) Category Identified Portable device Feature of EUT The EUT is a Body composition monitorinstalled Wireless LAN module. Size of EUT W:327 mm * D:312 mm * H:21.5 mm Test report No. : 10180434H-B-R1 Page : 49 of 50 FCC ID : VPYLBSN460 Issued date : February 7, 2014 Revised date : February 13, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 3. Antenna position Antenna location Antenna location Test report No. : 10180434H-B-R1 Page : 50 of 50 FCC ID : VPYLBSN460 Issued date : February 7, 2014 Revised date : February 13, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 4. Photographs of setup Front End of Report