VQSAMN41012Wireless Video Transmission Module

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested AMN41012 and AMN42012 Installation Manual An AMIMON Ltd.. Document Copyright 2018 Version 1.0 Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Table of Contents Table of Contents ....................................................................... 2 Important Notice ......................................................................... 3 Revision History .......................................................................... 4 Safety Instructions ..................................................................... 5 Introduction ................................................................................ 6 Product Description .................................................................... 8 (1) LED behaviors ................................................................................................. 10 (2) Board-to-Board Connector ........................................................................... 11 Installation ................................................................................ 12 S Y Z 0 1 0 M Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Important Notice AMIMON Ltd. reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to AMIMON's terms and conditions of sale supplied at the time of order acknowledgment. AMIMON warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with AMIMON's standard warranty. Testing and other quality control techniques are used to the extent AMIMON deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. AMIMON assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using AMIMON components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. AMIMON does not warrant or represent that any license, either express or implied, is granted under any AMIMON patent right, copyright, mask work right, or other AMIMON intellectual property right relating to any combination, machine, or process in which AMIMON products or services are used. Information published by AMIMON regarding third-party products or services does not constitute a license from AMIMON to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from AMIMON under the patents or other intellectual property of AMIMON. Reproduction of information in AMIMON data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. AMIMON is not responsible or liable for such altered documentation. Resale of AMIMON products or services with statements different from or beyond the parameters stated by AMIMON for that product or service voids all express and any implied warranties for the associated AMIMON product or service and is an unfair and deceptive business practice. AMIMON is not responsible or liable for any such statements. All company and brand products and service names are trademarks or registered trademarks of their respective holders. Please refer to the regulatory guide regarding regulatory information that needs to be on the labeling and user manual. Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Revision History Version Date Description 1.0 Jan 2,2019 Initial Release Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Safety Instructions  When operating this equipment, read and follow all the instructions in this manual  Do not open unit  Do not block air ventilation  Use only accessories/batteries/ power supplies provided, specified or recommended by AMIMON.  When devices are switched on keep away at least 20 cm from your body.  People with pacemakers should ALWAYS keep the device at the listed distance from their pacemaker when turned ON. Should you have any reason to suspect that interference is taking place, you should turn your device OFF.  Do not expose to moisture, excessive heat or fire  Keep away from water and other liquids  Do not power the device when it is wet or damp  Use the mains plug to disconnect the apparatus.  Clean with a dry cloth only  Unplug this apparatus during lightning storms or when unused for long periods of time  To reduce the risk of fire or electric shock, refer servicing to qualified service personnel  Please avoid electrostatic discharge from the antenna ports for proper operation  WARNING – do not touch. Please beware of hot surfaces of the devices and wait until it cools off  Please avoid electrostatic discharge from the antenna p…

Text truncated - open the document above for the full version.

Modules Draco Regulatory Statements for FCC and IC The following statements are required on the regulatory guide provided to the end-user and OEM: Applicable models: AMN41012, AMN42012 1.1.1 Product Information This product is designed to be compliant with rules and regulations in the country it is sold to and therefore is marked as required. These marking signify the countries the device is approved in. Operating the product without regulatory approvals is illegal. Please make sure you use the latest revision of this document which is available at https://TBD. Local language translation of this guide are obtained at: https://TBD Country Approvals: The product usage is subject to approval obtained in countries per marking on the device. For DoC, please refer to: https://TBD Antenna: The product is provided with an approved antenna. Use only supplied or approved antenna by AMIMON. Any changes or modifications to the Antenna may void the regulatory approvals obtained for the product. Modifications: Any changes or modifications not expressly approved by AMIMON or the party responsible for compliance could void the user’s authority to operate the equipment. 1.1.2 RF Modules: These devices contain the following approved radio modules: Device Description IC FCC ID AMN41012 HD Video Transmitter 7680A-AMN41012 VQSAMN41012 AMN42012 HD Video Receiver 7680A-AMN42012 VQSAMN42012 1.1.3 RF Exposure The product complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. To satisfy local RF exposure regulation requirements, the transmitting product must operate with a minimum separation distance of 20 cm or more from a person’s body. FCC RF Exposure Statement This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. NOTE IMPORTANTE: Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 1.1.4 Antenna Information The radio transmitters 7680A-AMN41012, and 7680A-AMN42012 have been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication Les présent émetteur radios 7680A-AMN41012, et 7680A-AMN42012 ont été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Radio IC Antenna Max. Permissible Gain Location Antenna Impedance 7680A-AMN41012 Dipole 2dBi Typical at 5GHz External 50Ω 7680A-AMN41012 Dipole 5dBi Typical at 5GHz External 50Ω 7680A-AMN42012 Dipole 2dBi Typical at 5GHz External 50Ω 7680A-AMN42012 Printed 11dBi typical at 5GHz External 50Ω 1.1.5 Unintentional Radio Interference FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna  Increase the separation between the equipment and receiver  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  Consult the dealer or an experienced radio/TV technician for help. IC Statement CAN ICES-3 B / NMB-3 B 1.1.6 Radio Transmitters FCC Statement Radio Transmitters (Part 15) – Class B Digital Devices This device complies with Part 15 of the FCC Rules. Operation is subject to the …

Text truncated - open the document above for the full version.

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential 5 Dec 2018 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Long Term Confidentiality Request For Model: AMN41012 and FCC ID: VQSAMN41012 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the following items required to be submitted with this application be permanently withheld from public review:  Detailed circuit schematics of EUT --- long term  Block diagram --- long term  Technical/Operational description --- long term  Bill Of Material --- long term The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Signature: ______________________ Tal Keren-Zvi VP R&D [email protected]

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested 6 Dec 2018 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 Request for Modular Approval for Model: AMN41012 FCC ID: VQSAMN41012 Applicant – Amimon Ltd. Module name –Wireless Video Transmitter Module With respect to Amimon's Wireless Video Receiver Module AMN41012, Amimon would like to have your authorization as a single modular approval. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. The radio portion of this transmitter module has been shielded, as seen in module photos. 2. The modular transmitter has buffered modulation/data inputs, Buffered data inputs stage has been integrated in baseband chip (Model: AMN2130) 3. The module has its own regulated power supply. Please refer to the Block Diagram. 4. The module complies with the antenna requirements of Section 15.203 and 15.204(c), the module has 5 UFL connector antennas with 2.0dBi or 5dBi antenna gain. The module was tested with the following unique antenna connectors: UFL 5. The module was tested in a standalone configuration. 6. The modular transmitter is labeled with its own FCC ID number. The FCC ID is shown on the label and permanently affixed to this module, please refer to label location. 7. The modular transmitter complies with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The necessary explanation to be complied with this requirement is contained in the user manual, and please refers to the User Manual. 8. The modular transmitter complies with any applicable RF exposure requirements in its final configuration. Please contact me if there is any information you may need. Sincerely, Signature: ______________________ Tal Keren-Zvi VP R&D [email protected]

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential 5 Dec 2018 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Model: AMN41012 and FCC ID: VQSAMN41012 To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, Amimon Ltd. requests short-term Confidentiality of following sections of this application for a period of 45 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which Amimon Ltd. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve Amimon Ltd. feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: ______________________ Tal Keren-Zvi VP R&D [email protected]

Eurofins E&E Americas https://metlabs.com [email protected] Baltimore HQ 914 W. Patapsco Ave. Baltimore, MD 21230 Union City 33439 Western Ave. Union City, CA 94587 Santa Clara 3162 Belick St. Santa Clara, CA 95054 Austin 13501 McCallen Pass Austin, TX 78753 March 11, 2022 To Whom It May Concern, This letter serves as a request that FCC ID: VQSAMN41012 / TC 674759 application be changed to a composite by the FCC. Thank you. Sincerely, Lynda Estrela TCB Administrator Eurofins E&E, NA.

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Model: AMN41012 FCC ID: VQSAMN41012 IC: 7680A-AMN41012 External Photographs Figure 1- AMN41012 – Top View Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Figure 2: AMN41012 – Bottom View

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Model: AMN41012 FCC ID: VQSAMN41012 IC: 7680A-AMN41012 External Photographs Label:

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Model: AMN41012 FCC ID: VQSAMN41012 IC: 7680A-AMN41012 Internal Photographs Figure 1- AMN41012 – Top View without shields Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Figure 2: AMN41012 – Bottom View

Amimon Ltd. 26 Zarhin St. Raanana, Israel. Tel: +972-9-9629222 www.amimon.com 2017 © All rights reserved to Amimon ltd. Proprietary and Confidential Confidentiality is requested Label Location:

承 認 書 SPECIFICATION FOR APPROVAL 客 戶 CUSTOMER 日 期 DATE 品 名 DESCRIPTION 客 戶 料 號 CUSTOMER P/N 成 品 編 號 Part No. 萬旭電業股份有限公司 Wanshih Electronic Co., Ltd. 新北市五股區新北產業園區五工六路72號4樓 4F 72 Wu Kong 6th Rd., Wugu Dist., New Taipei Industrial Park, New Taipei City 24891, Taiwan(R.O.C.) TEL：886-2-2298-8066 FAX：886-2-2298-1102 友旺科技股份有限公司 2017/12/13 Antenna WSS002(SJ1WFI0009A)26L 2.4~5.85GHz,50Ohm,2dbi,108.5mm黑 萬旭LF SJ1WFI0009A M30-002++-001 Table of Contents Table of Contents ......... 2 Specification ......... 3 Antenna Drawing ......... 4 Material Data Sheet Coaxial Cable ......... 5-7 Housing ......... 8 Hinge/小護套 ......... 9-10 SPECIFICATION 1. Description ：Antenna WSS002(SJ1WFI0009A)26L 2.4~5.85GHz,50Ohm,2dbi,108.5mm黑 萬旭LF 2. Customer ：友旺科技股份有限公司 3. Model No. ：WSS002 4. Part No. ：SJ1WFI0009A 5. Standard ：IEEE 802.11a+b/g Wireless LAN 6. Antenna Profile ：108.5 mm length (see Drawing) 7. Color ：Black 8. Electrical Characteristics Operating Frequency ：2.4~2.5 / 5.15~5.35 / 5.475~5.725 / 5.725~5.85GHz Antenna Type ：Dipole Sleeve Polarization Type ：Linear Type of Radiation ：Toroidal Peak Gain ：2.0 dBi Max. Impedance ：50 Ohm nominal V.S.W.R. ：2.0:1 Max. 9. Mechanical Characteristics Action ：Swivel Type Connector ：RP-SMA (M) Core ：N/A 10. Raw Material Coaxial Cable ：RG-178 Housing ：TPU Hinge/小護套 ：PC+ALLOY/POM 11 Reverse SMA φ10 本體 SM3033-A 本體 SMA CONNECTOR φ10 W/P 黑黑/銀1 10 Reverse SMA φ 10 PIN絕緣028922003 SMA CONNECTOR 10φ母1 9 Reverse SMA ψ10 連接軸 L=8.7 φ4.7連接軸 鍍錫銀1 8外套IY072BK100 9.3φ*75L(67L) 外套<黑> 黑1 7熱縮套管熱縮套管 5.0 黑黑 20 1 6銅管5.2φx26.0L*0.2T 銅管<平頭>銀1 5銅管5.2φx22L FOR 178 銅管(平頭)銀1 4固定鉚釘028922001-4 3.80*1.90φ固定鉚釘<小>(黑鋅)黑2 3下座9.3φ下座(6.6φ扁孔凹槽)黑黑1 2上座IY214BK100 9.5φ*20.0L 上座 <黑> 黑1 1RG-178 Coaxial Cable RG-178<镀锡> CABLE 105SV 橙橙 57 1 NO材料名稱零件規格顏色 切斷尺寸 用量 Coaxial Cable Data Sheet RG-178 Coaxial Cable Housing Material Data Sheet Housing - TPU Hinge(Base/Holder/小護套) - PC+ALLOY/POM

Approval sheet Dipole ANTENNA 802.11 b/a Series 2.4/5.x GHz Dual Band Working Frequency Halogens Free Product P/N: RFDPA151300SBLB8G1 Customer烉⍳㖢䥹(九)偉ấ㚱旸℔⎠ Customer ‘s Part No.烉 M30-15130-000 Approval No.烉 Issue Date烉 *Contents in this sheet are subject to change without prior notice. Page 1 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet VersionDateDescriptionAuthor V01 2015 May. New Release PIPI Page 2 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet ELECTRICAL CHARACTERISTICS ItemSpecification Working Frequency Range 2.4 / 5.X GHz (Note-1) Gain 3 dBi烊5dBi Return Loss -10dB(Max) VSWR2 max. PolarizationLinear Radiation Pattern Omni-directional Impedance 50: *Note 1. Central Frequency should be defined after customers’ application approval. MATERIAL TABLE ItemsDescription CableRG178(Brown) Antenna Cover TPEE Antenna Base PC/PBT ConnectorReverse SMA Plug ColorBlack Brass Tube Brass SpringPhosphor Bronze Tube CB-HFT ORDERING RULE RFDPA 151300SBLB8G1 Type Code Product Code Dipole Dimension (Unit: mm) Cable Length (unit: cm) Connector Brand Type of Connector Application Project status Wire Diameter Project Walsin RF Device DPA: Dipole Antenna Per 2 digits o f length, width e.g.: 1513 Length 157.5mm, Width 13mm 2 digits for cable length e.g.: 00 None Cable A: N C:MCX D:IPEX III E: IPEX IV F: IPEX A13 H: Hirose I: IPEX M: MMCX S: SMA T: TNC U:MURATA N: None A: Reverse Female B: Reverse Male F: Female M: Male N: None 0: 0GHz 3: 3GHz 5: 5 GHz 6: 6GHz A: 2.4GHz ISM band B: GSM 900/1800 dual band G: GPS band L: 2.4/5.2/5.8 GHz tri-band N: NFC T:LTE band W: WCDMA band B: MP T:During Test X: Pile Runġ 0:None 1:ĝ0.81 3:ĝ1.13 6:RG316 7:ĝ1.37 8:RG178 01~99 series number Page 3 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet DIMENSIONS Page 4 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet Test Report ˍExperimental Setup Page 5 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet ˍELECTRICAL CHARACTERISTICS Return Loss Page 6 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet ˍRADIATION PATTERN 2400~2500 MHz Phi=0.00deg Gain . dB Page 7 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet Phi=90.00deg Gain . dB Page 8 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet Theta=90.00deg Gain . dB Page 9 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet 5150~5850 MHz Phi=0.00deg Gain . dB Page 10 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet Phi=90.00deg Gain . dB Page 11 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet Theta=90.00deg Gain . dB Page 12 of 13 RFDPA151300SBLB8G1_V01May. 2015 Approval sheet Package Page 13 of 13 RFDPA151300SBLB8G1_V01May. 2015

HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas | China | Korea | Taiwan www.metlabs.com January 21, 2020 Amimon 26 Zarhin St, POBox 2308 Raanana,4366250, Israel Dear Gabi Nocham, Enclosed is the EMC Wireless test report for compliance testing of the Amimon, AMN41012 as tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Title 47 of the CFR, Part 15.407, Subpart E (UNII 1). Thank you for using the services of Eurofins MET Labs, Inc. If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, EUROFINS MET LABS, INC. Joel Huna Technical Writer Reference: (\Amimon\ EMC101258B-FCC407 UNII 1 Rev. 6) Certificates and reports shall not be reproduced except in full, without the written permission of Eurofins MET Labs, Inc While use of the A2LA logo in this report reflects MET accreditation under these programs, the report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the Federal Government. This letter of transmittal is not a part of the attached report. HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 MET Report: EMC101258B-FCC407 UNII 1 Rev. 6 © 2020, Eurofins MET Labs, Inc. Page i of vi Electromagnetic Compatibility Criteria Test Report for the Amimon Model AMN41012 Tested under The FCC Certification Rules contained in Title 47 of the CFR 15.407 Subpart E MET Report: EMC101258B-FCC407 UNII 1 Rev. 6 January 21, 2020 Prepared For: Amimon 26 Zarhin St, POBox 2308 Raanana,4366250, Israel Prepared By: Eurofins MET Labs, Inc. 914 West Patapsco Avenue, Baltimore MD 21230 Electromagnetic Compatibility Amimon Introduction AMN41012 CFR Title 47, Part 15.407 Subpart E MET Report: EMC101258B-FCC407 UNII 1 Rev. 6 © 2020, Eurofins MET Labs, Inc. Page ii of v Electromagnetic Compatibility Criteria Test Report for the Amimon Model AMN41012 Tested under The FCC Certification Rules contained in Title 47 of the CFR 15.407 Subpart E Donald Salguero, Project Engineer Joel Huna Electromagnetic Compatibility Lab Documentation Department Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of 15.407 of the FCC Rules under normal use and maintenance. Benjamin Taylor, Wireless Manager, Electromagnetic Compatibility Lab Electromagnetic Compatibility Amimon Introduction AMN41012 CFR Title 47, Part 15.407 Subpart E MET Report: EMC101258B-FCC407 UNII 1 Rev. 6 © 2020, Eurofins MET Labs, Inc. Page iii of v Report Status Sheet Revision Report Date Reason for Revision  April 10, 2019 Initial Issue. 1 June 7, 2019 Customer Requested Changes 2 July 17, 2019 Updated Output Power and Power Spectral Density Sections 3 September 16, 2019 TCB Comments 4 December 16, 2019 TCB Comments 5 January 9, 2020 TCB Comments – Duty Cycle 6 January 21, 2020 TCB Comments Electromagnetic Compatibility Amimon Table of Contents AMN41012 CFR Title 47, Part 15.407 Subpart E MET Report: EMC101258B-FCC407 UNII 1 Rev. 6 © 2020, Eurofins MET Labs, Inc. Page i of v Table of Contents I. Executive Summary ................................................................................................................................................. 1 A. Purpose of Test ................................................................................................................................................... 2 B. Executive Summary ............................................................................................................................................ 2 II. Equipment Configuration ....................................................................................................................................... 3 A. Overview ............................................................................................................................................................. 4 B. References ........................................................................................................................................................... 5 C. Test Site .............................................................................................................................................................. 5 D. Description of Test Sample ................................................................................................................................. 5 E. Equipment Configuration .................................................................................................................................... 6 F. Support Equipment ............................................................................................................................................. 7 G. Ports and Cabling Information ............................................................................................................................ 7 H. Mode of Operation .............................................................................................................................................. 8 I. Method of Monitoring EUT Operation ............................................................................................................... 8 J. Modifications ...................................................................................................................................................... 8 a) Modifications to EUT .......................…

Text truncated - open the document above for the full version.

HEADQUARTERS: 914 WEST PATAPSCO AVENUE • BALTIMORE, MARYLAND 21230 • PHONE (410) 354-3300 • FAX (410) 354-3313 Maryland | California | Texas | China | Korea | Taiwan www.metlabs.com December 16, 2019 Amimon 26 Zarhin St, POBox 2308 Raanana,4366250, Israel Dear Gabi Nocham, Enclosed is the EMC Wireless test report for compliance testing of the Amimon, AMN41012 as tested to the requirements of Title 47 of the CFR, Ch. 1 (10-1-06 ed.), Title 47 of the CFR, Part 15.407, Subpart E (UNII 2). Thank you for using the services of Eurofins MET Labs, Inc If you have any questions regarding these results or if MET can be of further service to you, please feel free to contact me. Sincerely yours, EUROFINS MET LABS, INC Joel Huna Documentation Department Reference: (\Amimon\EMC101258B-FCC407 UNII 2 DFS Rev. 3) Certificates and reports shall not be reproduced except in full, without the written permission of Eurofins MET Labs, Inc While use of the A2LA logo in this report reflects MET accreditation under these programs, the report must not be used by the client to claim product certification, a…

Text truncated - open the document above for the full version.