XPYUBX20VA01LTE Cat-M1, NB2 and 2G data only module

UBX-16029218 - R20 C1-Public www.u-blox.com SARA-R4 series Multi-band LTE-M / NB-IoT / EGPRS modules System integration manual Abstract This document describes the features and the integration of the size-optimized SARA-R4 series cellular modules. These modules are a complete, cost efficient, performance optimized, multi-mode and multi band LTE-M / NB-IoT / EGPRS solution in the compact SARA form factor. SARA-R4 SARA-R4 series - System integration manual UBX-16029218 - R20 Document information Page 2 of 129 C1-Public Document information Title SARA-R4 series Subtitle Multi-band LTE-M / NB-IoT / EGPRS modules Document type System integration manual Document number UBX-16029218 Revision and date R20 11-Mar-2021 Disclosure restriction C1-Public Product status Corresponding content status Functional sample Draft For functional testing. Revised and supplementary data will be published later. In development / Prototype Objective specification Target values. Revised and supplementary data will be published later. Engineering sample Advance information Data based on early testing. Revised and supplementary data will be published later. Initial production Early production information Data from product verification. Revised and supplementary data may be published later. Mass production / End of life Production information Document contains the final product specification. SARA-R4 series - System integration manual UBX-16029218 - R20 Document information Page 3 of 129 C1-Public This document applies to the following products: Product name Type number Modem version Application version PCN reference Product status SARA-R410M SARA-R410M-01B-00 L0.0.00.00.02.03 UBX-18059854 Obsolete SARA-R410M-02B-00 L0.0.00.00.05.06 A02.00 UBX-18010263 Obsolete L0.0.00.00.05.06 A02.01 UBX-18070443 Obsolete SARA-R410M-02B-01 L0.0.00.00.05.08 A02.04 UBX-19041392 Mass production SARA-R410M-02B-02 L0.0.00.00.05.11 A.02.16 UBX-20033274 Mass production SARA-R410M-02B-03 L0.0.00.00.05.12 A.02.19 UBX-20058104 Initial production SARA-R410M-52B-00 L0.0.00.00.06.05 A02.06 UBX-18045915 Obsolete SARA-R410M-52B-01 L0.0.00.00.06.08 A02.11 UBX-19024506 Mass production SARA-R410M-52B-02 L0.0.00.00.06.11 A.02.16 UBX-20033274 Mass production SARA-R410M-63B-00 L0.08.12 A.01.11 UBX-20006293 End of life SARA-R410M-63B-01 L0.08.12 A.01.12 UBX-20053055 Initial production SARA-R410M-73B-00 L0.08.12 A.01.11 UBX-20006294 End of life SARA-R410M-73B-01 L0.08.12 A.01.12 UBX-20049254 Initial production SARA-R410M-83B-00 L0.08.12 A01.11 UBX-20027231 End of life SARA-R410M-83B-01 L0.08.12 A.01.12 UBX-20049255 Initial production SARA-R412M SARA-R412M-02B-00 M0.09.00 A.02.11 UBX-19004091 Obsolete SARA-R412M-02B-01 M0.10.00 A.02.14 UBX-19016568 Mass production SARA-R412M-02B-02 M0.11.01 A.02.17 UBX-20031249 Mass production SARA-R412M-02B-03 M0.12.00 A.02.19 UBX-20058105 Initial production SARA-R422 SARA-R422-00B-00 00.06 A00.01 UBX-20050548 Engineering sample SARA-R422S SARA-R422S-00B-00 00.06 A00.01 UBX-20050548 Engineering sample SARA-R422M8S SARA-R422M8S-00B-00 00.06 A00.01 UBX-20050548 Engineering sample u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only permitted with the express written permission of u-blox. The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent documents, visit www.u-blox.com. Copyright © u-blox AG. SARA-R4 series - System integration manual UBX-16029218 - R20 Contents Page 4 of 129 C1-Public Contents Document information ................................................................................................................................ 2 Contents .......................................................................................................................................................... 4 1 System description ............................................................................................................................... 7 1.1 Overview ........................................................................................................................................................ 7 1.2 Architecture ...............................................................................................................................................11 1.3 Pin-out .........................................................................................................................................................14 1.4 Operating modes .......................................................................................................................................19 1.5 Supply interfaces ......................................................................................................................................22 1.5.1 Module supply input (VCC) .............................................................................................................22 1.5.2 Generic digital interfaces supply output (V_INT) .......................................................................28 1.6 System function interfaces ....................................................................................................................29 1.6.1 Module power-on ..............................................................................................................................29 1.6.2 Module power-off ..............................................................................................................................30 1.6.3 Module reset ..................................…

Text truncated - open the document above for the full version.

Author u-blox Department: cert Page: 1/2 Filename SARA-R422x_TCB Request for FCC Confidentiality.docx M102 Rev. 1 Copyright © 2020 u-blox. All rights reserved Confidential Certification Declaration Doc id: UBX-21000700 Rev.: 1.0 Date: 29/12/2020 TCB Request for Confidentiality Issued by: u-blox AG Zürcherstrasse 68 CH-8800 Thalwil / Switzerland Phone: +41 44 722 74 44 Fax: +41 44 722 74 47 [email protected] Subject: Confidentiality Request for: • FCC: XPYUBX20VA01 • Model Name: SARA-R422M8S, SARA-R422S, SARA-R422 Pursuant to FCC 47 CRF 0.457(d) and 0.459 of the Commission Rules, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual u-blox AG, Zuercherstrasse 68, 8800 Thalwil, Switzerland has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Author u-blox Department: cert Page: 2/2 Filename SARA-R422x_TCB Request for FCC Confidentiality.docx M102 Rev. 1 Copyright © 2020 u-blox. All rights reserved Confidential Certification Declaration Doc id: UBX-21000700 Rev.: 1.0 Date: 29/12/2020 Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TCB in the event information regarding the product or the product is made available to the public. TCB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, u-blox AG ___________________________________________________ Giulio Comar Certification Manager u-blox Italia S.p.A., Via Stazione di Prosecco, 15 34010 - Sgonico (Trieste) Italy u-blox Italia S.p.A. is a wholly owned subsidiary of u-blox AG e-mail: [email protected]

Author u-blox AG Department: cert Page: 1/2 Filenam e SARA-R422x_FCC Modular Approval Letter.docx M102 Rev. 1 Copyright © 2013 u-blox. All rights reserved. Confidential Certification Declaration Doc ID: UBX-21000705 Rev.: 1.0 Date: 11/01/2021 Modular Approval Request Issued by: u-blox AG Zürcherstrasse 68 CH-8800 Thalwil / Switzerland Phone: +41 44 722 74 44 Fax: +41 44 722 74 47 [email protected] Subject: Modular Approval Request • FCC: XPYUBX20VA01 • IC: 8595A-UBX20VA01 • Model Name: o SARA-R422M8S o SARA-R422S o SARA-R422 The following attestation addresses the requirements to support modular approval: Modular approval requirement Yes (provide brief statement) No * (a) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly Yes (b) The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal Yes (c) The module must contain power supply regulation on the module Yes (d) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per Sections Yes Author u-blox AG Department: cert Page: 2/2 Filenam e SARA-R422x_FCC Modular Approval Letter.docx M102 Rev. 1 Copyright © 2013 u-blox. All rights reserved. Confidential Certification Declaration Doc ID: UBX-21000705 Rev.: 1.0 Date: 11/01/2021 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) (e) The module must demonstrate compliance in a stand-alone configuration Yes (f) The module must be labelled with its permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements) Yes (g) The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements Yes (h) The module must comply with RF exposure requirements Yes * Please provide a detailed explanation if the answer is “No.” Sincerely, u-blox AG ___________________________________________________ Giulio Comar Certification Manager u-blox Italia S.p.A., Via Stazione di Prosecco, 15 34010 - Sgonico (Trieste) Italy u-blox Italia S.p.A. is a wholly owned subsidiary of u-blox AG e-mail: [email protected]

Author u-blox Department: cert Page: 1/1 Filename SARA-R422x_Power_of_Attorney M102 Rev. 1 Copyright © 2020 u-blox. All rights reserved Confidential Certification Declaration Doc ID: UBX-21000074 Rev.: 1.0 Date: 29/12/2020 Power of Attorney Issued by: u-blox AG Zürcherstrasse 68 CH-8800 Thalwil / Switzerland Phone: +41 44 722 74 44 Fax: +41 44 722 74 47 [email protected] Subject: Power of Attorney to 7Layers Gmbh To whom it may concern, Please be notified that we, u-blox AG, have assigned 7Layers Gmbh as our agent to arrange the matters relating to international country approvals, including submitting and revising documents and test reports. Any and all acts carried out by 7Layers Gmbh on the matters relating to international country approvals shall have the same legal authority as acts on our own behalf. Meanwhile, u-blox AG will be fully responsible for mass products to be in compliance with regulations. This authorization is limited to below equipments: ⚫ Product Description: LTE Cat-M1, NB2 and 2G data only module ⚫ Brand name: u-blox ⚫ Model#: SARA-R422M8S, SARA-R422S, SARA-R422 ⚫ Marketing Name: SARA-R422M8S, SARA-R422S, SARA-R422 Sincerely, u-blox AG ___________________________________________________ Giulio Comar Certification Manager u-blox Italia S.p.A., Via Stazione di Prosecco, 15 34010 - Sgonico (Trieste) Italy u-blox Italia S.p.A. is a wholly owned subsidiary of u-blox AG e-mail: [email protected]

Author u-blox AG Department: cert Page: 1/1 Filenam e SARA-R422x_FCC_ISED B71 Not Applicable Decleration Letter.docx M102 Rev. 1 Copyright © 2013 u-blox. All rights reserved. Confidential Declaration Doc ID: UBX-21008032 Rev.: 1.0 Date: 03/03/2021 Declaration Issued by: u-blox AG Zürcherstrasse 68 CH-8800 Thalwil / Switzerland Phone: +41 44 722 74 44 Fax: +41 44 722 74 47 [email protected] Subject: Band 71 not supported for initial certification • FCC: XPYUBX20VA01 • IC: 8595A-UBX20VA01 • Model Name: o SARA-R422M8S o SARA-R422S o SARA-R422 We, u-blox AG, hereby declare that Band 71 is not supported by SARA-R422M8S, SARA-R422S and SARA-R422 modules and does not apply to the FCC and ISED initial certifications. Sincerely, u-blox AG ___________________________________________________ Giulio Comar Certification Manager u-blox Italia S.p.A., Via Stazione di Prosecco, 15 34010 - Sgonico (Trieste) Italy u-blox Italia S.p.A. is a wholly owned subsidiary of u-blox AG. e-mail: [email protected]

Test Laboratory: 7layers GmbH Borsigstraße 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Registergericht registered in: Borsigstraße 11 Geschäftsführer / Düsseldorf, HRB 75554 40880 Ratingen, Germany Managing Directors: USt-IdNr VAT No.: T +49 (0) 2102 749 0 Frank Spiller DE203159652 F +49 (0) 2102 749 350 Bernhard Retka TAX No. 147/5869/0385 www.7layers.com Alexandre Norré-Oudard A Bureau Veritas Group Company RF Exposure and Maximum ERP/EIRP Assessment For NB‐IoT SARA‐R422M8S / SARA‐R422S / SARA‐R422 FCC ID: XPYUBX20VA01 IC: 8595A‐UBX20VA01 Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Page 2 of 10 Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 1 Administrative Data 4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data 5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 6 3 Evaluation Results 7 3.1 Maximum ERP / EIRP 7 3.2 RF Exposure Evaluation for Module 9 Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Page 4 of 10 1 Administrative Data 1.1 Testing Laboratory Company Name: 7layers GmbH Address Borsigstr. 11 40880 Ratingen Germany FCC accreditation Designation Number: DE0015 Test Firm Registration #: 929146 Industry Canada Test Site Acceptance CAB identifier: DE0007 Test Firm Registration #: 3699A The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D‐PL‐12140‐01‐01 DAkkS D‐PL‐12140‐01‐02 DAkkS D‐PL‐12140‐01‐03 Responsible for Accreditation Scope: Dipl.‐Ing. Bernhard Retka Dipl.‐Ing. Robert Machulec Dipl.‐Ing. Andreas Petz Dipl.‐Ing. Marco Kullik Report Template Version: 2020‐03‐26 1.2 Project Data Responsible for assessment and report: Mr. Roseelan Sathiyaseelan Date of Report: 12.03.2021 1.3 Applicant Data Company Name: u‐blox AG Address: Zürcherstrasse 68, CH‐8800 Thalwil Switzerland Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Page 5 of 10 2 Test object Data 2.1 General EUT Description Equipment under Test SARA‐R422M8S / SARA‐R422S / SARA‐R422 Kind of Device: LTE CAT‐M1 / NB‐IoT / GPRS module FCC ID: XPYUBX20VA01 IC: 8595A‐UBX20VA01 General product description: The EUT is Cellular radio module supporting LTE CAT‐M1 / NB‐IoT / GPRS module. 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment under Test HW Status SW Status EUT A Code: DE1015120 SARA‐R422M8S 360DA1 00.06 EUT A Code: DE1015129 SARA‐R422S 360DB0 00.04 EUT A Code: DE1015129 SARA‐R422 360DB0 00.04 Remark: EUT A is equipped with a temporary antenna connector. The Module is not sold with a predefined antenna. NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless, Ancillary Equipment can influence the test results. Short Description Equipment under Test Type Designation HW Status SW Status Serial no. FCC ID NA – Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Page 6 of 10 2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless, Auxiliary Equipment can influence the test results. Short Description Equipment under Test Type Designation Serial no. HW Status SW Status FCC ID N/A – Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Page 7 of 10 3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 ISED RSS‐132, Issue 3 eFDD5 FCC 47 CFR §24.232 ISED RSS‐133 Issue 6, Amendment 1 eFDD2 FCC 47 CFR §27.50(d) ISED RSS‐139, Issue 3 eFDD4/eFDD66 FCC 47 CFR §27.50(c) ISED RSS‐130, Issue 3 eFDD12/eFDD85 FCC 47 CFR §27.1507(a) eFDD8 FCC 47 CFR §27.50(b) ISED RSS‐130, Issue 3 eFDD13 FCC 47 CFR §90.635 ‐ 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP‐503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7‐Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent EIRP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. 3.1.2 Test Protocol Maximum antenna gain to comply with EIRP limits for FCC and Industry Canada Band Mode Duty Cycle Frequency Range (MHZ) Maximum Conducted output power (dBm) Maximum Conducted output power (mW) FCC EIRP limit (mW) Maximum antenna gain to meet EIRP Limit (dBi) eFDD 2 NB‐IoT 100.0% 1850‐1910 24.27 267.300641 2000 8.7 eFDD 4 NB‐IoT 100.0% 1710‐1755 24.7 295.120923 1000 5.3 eFDD 5 NB‐IoT 100.0% 824 ‐ 849 24.34 271.643927 11500 16.3 eFDD 13 NB‐IoT 100.0% 777‐787 24.94 311.888958 3000 9.8 eFDD 12 NB‐IoT 100.0% 699‐716 23.7 234.422882 3000 11.1 eFDD 66 NB‐IoT 100.0% 1710‐1780 25.3 338.844156 1000 4.7 eFDD 8 NB‐IoT 100.0% 898‐890 22.82 191.425593 3000 12.0 eFDD85 NB‐IoT 100.0% 698‐716 24.81 302.691343 3000 10.0 Assessment Reference: MDE_UBLOX_2005_MPE_02_rev02 Page 8 of 10 3.1.3 Conclusion Ban…

Text truncated - open the document above for the full version.

Test Laboratory: 7layers GmbH Borsigstraße 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Registergericht registered in: Borsigstraße 11 Geschäftsführer / Düsseldorf, HRB 75554 40880 Ratingen, Germany Managing Directors: USt-IdNr VAT No.: T +49 (0) 2102 749 0 Frank Spiller DE203159652 F +49 (0) 2102 749 350 Bernhard Retka TAX No. 147/5869/0385 www.7layers.com Alexandre Norré-Oudard A Bureau Veritas Group Company RF Exposure and Maximum ERP/EIRP Assessment For GPRS/ Cat‐M1 SARA‐R422M8S / SARA‐R422S / SARA‐R422 FCC ID: XPYUBX20VA01 IC: 8595A‐UBX20VA01 Assessment Reference: MDE_UBLOX_2005_MPE_03_rev01 Assessment Reference: MDE_UBLOX_2005_MPE_03_rev01 Page 2 of 10 Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 1 Administrative Data 4 1.1 Testing Laboratory 4 1.2 Project Data 4 1.3 Applicant Data 4 1.4 Manufacturer Data 4 2 Test object Data 5 2.1 General EUT Description 5 2.2 EUT Main components 5 2.3 Ancillary Equipment 5 2.4 Auxiliary Equipment 6 3 Evaluation Results 7 3.1 Maximum ERP / EIRP 7 3.2 RF Exposure Evaluation for Module 8 Assessment Reference: MDE_UBLOX_2005_MPE_03_rev01 Page 4 of 10 1 Administrative Data 1.1 Testing Laboratory Company Name: 7layers GmbH Address Borsigstr. 11 40880 Ratingen Germany FCC accreditation Designation Number: DE0015 Test Firm Registration #: 929146 Industry Canada Test Site Acceptance CAB identifier: DE0007 Test Firm Registration #: 3699A The test facility is also accredited by the following accreditation organisation: Laboratory accreditation no.: DAkkS D‐PL‐12140‐01‐01 DAkkS D‐PL‐12140‐01‐02 DAkkS D‐PL‐12140‐01‐03 Responsible for Accreditation Scope: Dipl.‐Ing. Bernhard Retka Dipl.‐Ing. Robert Machulec Dipl.‐Ing. Andreas Petz Dipl.‐Ing. Marco Kullik Report Template Version: 2020‐03‐26 1.2 Project Data Responsible for assessment and report: Mr. Roseelan Sathiyaseelan Date of Report: 11.03.2021 1.3 Applicant Data Company Name: u‐blox AG Address: Zürcherstrasse 68, CH‐8800 Thalwil Switzerland Contact Person: Giulio Comar 1.4 Manufacturer Data Company Name: please see applicant data Address: Contact Person: Assessment Reference: MDE_UBLOX_2005_MPE_03_rev01 Page 5 of 10 2 Test object Data 2.1 General EUT Description Equipment under Test SARA‐R422M8S / SARA‐R422S / SARA‐R422 Kind of Device: LTE CAT‐M1 / NB‐IoT / GPRS module FCC ID: XPYUBX20VA01 IC: 8595A‐UBX20VA01 General product description: The EUT is Cellular radio module supporting LTE CAT‐M1 / NB‐IoT / GPRS module. 2.2 EUT Main components Type, S/N, Short Descriptions etc. used in this Test Report Short Description Equipment under Test HW Status SW Status EUT A Code: DE1015120 SARA‐R422M8S 360DA1 00.06 EUT A Code: DE1015129 SARA‐R422S 360DB0 00.04 EUT A Code: DE1015129 SARA‐R422 360DB0 00.04 Remark: EUT A is equipped with a temporary antenna connector. The Module is not sold with a predefined antenna. NOTE: The short description is used to simplify the identification of the EUT in this test report. 2.3 Ancillary Equipment For the purposes of this test report, ancillary equipment is defined as equipment which is used in conjunction with the EUT to provide operational and control features to the EUT. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless, Ancillary Equipment can influence the test results. Short Description Equipment under Test Type Designation HW Status SW Status Serial no. FCC ID NA – Assessment Reference: MDE_UBLOX_2005_MPE_03_rev01 Page 6 of 10 2.4 Auxiliary Equipment For the purposes of this test report, auxiliary equipment is defined as equipment which is used temporarily to enable operational and control features especially used for the tests of the EUT which is not used during normal operation or equipment that is used during the tests in combination with the EUT but is not subject of this test report. It is necessary to configure the system in a typical fashion, as a customer would normally use it. But nevertheless, Auxiliary Equipment can influence the test results. Short Description Equipment under Test Type Designation Serial no. HW Status SW Status FCC ID N/A – Assessment Reference: MDE_UBLOX_2005_MPE_03_rev01 Page 7 of 10 3 Evaluation Results 3.1 Maximum ERP / EIRP Standard Frequency Band FCC 47 CFR §22.913 ISED RSS‐132, Issue 3 GSM 850/eFDD5/eFDD26 FCC 47 CFR §24.232 ISED RSS‐133 Issue 6 GSM 1900/eFDD2/eFDD25 FCC 47 CFR §27.50(d) ISED RSS‐139, Issue 3 eFDD4/eFDD66 FCC 47 CFR §27.50(c) ISED RSS‐130, Issue 3 eFDD12 FCC 47 CFR §27.1507(a) eFDD8 FCC 47 CFR §27.50(b) ISED RSS‐130, Issue 3 eFDD13 FCC 47 CFR §90.635 eFDD26 3.1.1 Test Limits For the 850MHz band, FCC §22.913 states that the maximum ERP of this device shall not exceed 7 Watts. IC SRSP‐503 Issue 7, states that this device shall not exceed a maximum EIRP of 11.5 Watts For the purposes of this test report, the 7 Watt ERP limit stipulated in FCC §22.913 has been converted to an equivalent EIRP value of 11.5 Watts. For all other limits, refer to the values stipulated in the corresponding tables. 3.1.2 Test Protocol Maximum antenna gain to comply with EIRP limits for FCC and Industry Canada Band Mode Duty Cycle Frequency Range (MHZ) Maximum Conducted output power (dBm) Maximum Conducted output power (mW) FCC EIRP limit (mW) Maximum antenna gain to meet EIRP Limit (dBi) 850 GSM 12.5% 824.2 ‐ 848.8 32.25 1678.804 11500 8.4 850 EDGE 50.0% 824.2 ‐ 848.8 28 630.957344 11500 12.6 1900 GSM 12.5% 1850.2 ‐ 1909.8 29.05 803.52612 2000 4.0 1900 EDGE 50.0% 1850.2 ‐ 1909.8 26.89 488.652359 2000 6.1 eFDD 2 Cat‐M1 100.0% 1850‐1910 22.81 190.985326 2000 10.2 eFDD 4 Cat‐M1 100.0% 1710‐1755 22.86 193.196832 1000 7.1 eFDD 5 Cat‐M1 100.0% 824 ‐ 849 22.67 184.926862 11500 17.9 eFDD 13 Cat‐M1 100.0% 777‐787 22.86 193.196832 3000 11.9 eFDD 12 Cat‐M1 100.0% 699‐716 22.79 190.107828 3000 12.0 eFDD …

Text truncated - open the document above for the full version.

Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Frank Spiller Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Alexandre Norré- Oudard Steuer -Nr./TAX -No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF FCC Measurement/Technical Report on SARA-R422M8S SARA-R422S SARA-R422 FCC ID: XPYUBX20VA01 IC: 8595A-UBX20VA01 Test Report Reference: MDE_UBLOX_2005_FCC_01_REV04 TEST REPORT REFERENCE: MDE_UBLOX_2005_FCC_01_REV04 Page 2 of 270 Table of Contents 1 Applied Standards and Test Summary 4 1.1 Applied Standards 4 1.2 FCC-IC Correlation Table 6 1.3 Measurement Summary 10 2 Revision History / Signatures 41 3 Administrative Data 42 3.1 Testing Laboratory 42 3.2 Project Data 42 3.3 Applicant Data 42 3.4 Manufacturer Data 42 4 Test object Data 43 4.1 General EUT Description 43 4.2 EUT Main components 43 4.3 Ancillary Equipment 45 4.4 Auxiliary Equipment 45 4.5 EUT Setups 45 4.6 Operating Modes / Test Channels 46 4.7 Product labelling 48 5 Test Results 49 5.1 RF Output power 49 5.2 Frequency stability 56 5.3 Spurious emissions at antenna terminals 63 5.4 Field strength of spurious radiation 69 5.5 Emission and occupied bandwidth 79 5.6 Band edge compliance 85 5.7 Peak-average-ratio 90 5.8 RF Output power 94 5.9 Frequency stability 101 5.10 Spurious emissions at antenna terminal 107 5.11 Field strength of spurious radiation 113 5.12 Emission and occupied bandwidth 124 5.13 Band edge compliance 130 5.14 Peak to Average Ratio 136 5.15 RF Output Power 140 5.16 Frequency stability 154 5.17 Spurious emissions at antenna terminals 168 5.18 Field strength of spurious radiation 182 5.19 Emission and occupied bandwidth 206 5.20 Band edge compliance 216 5.21 Peak to Average Ratio 229 5.22 RF Output Power 239 TEST REPORT REFERENCE: MDE_UBLOX_2005_FCC_01_REV04 Page 3 of 270 5.23 Spurious Emissions at antenna terminals 242 5.24 Field strength of spurious radiation 245 5.25 Emission and Occupied Bandwidth 251 5.26 Band Edge 254 5.27 Peak to Average Ratio 257 6 Test Equipment 259 7 Antenna Factors, Cable Loss and Sample Calculations 263 7.1 LISN R&S ESH3-Z5 (150 kHz – 30 MHz) 263 7.2 Antenna R&S HFH2-Z2 (9 kHz – 30 MHz) 264 7.3 Antenna R&S HL562 (30 MHz – 1 GHz) 265 7.4 Antenna R&S HF907 (1 GHz – 18 GHz) 266 7.5 Antenna EMCO 3160-09 (18 GHz – 26.5 GHz) 267 7.6 Antenna EMCO 3160-10 (26.5 GHz – 40 GHz) 268 8 Measurement Uncertainties 269 9 Photo Report 270 TEST REPORT REFERENCE: MDE_UBLOX_2005_FCC_01_REV04 Page 4 of 270 1 APPLIED STANDARDS AND TEST SUMMARY 1.1 APPLIED STANDARDS Type of Authorization Certification for a cellular mobile device. Applicable FCC Rules Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 2 and 22, (10-1-19 Edition). The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Part 22, Subpart H – Cellular Radiotelephone Service § 22.905 – Channels for cellular service § 22.913 – Effective radiated power limits § 22.917 – Emission limitations for cellular equipment Part 27; Miscellaneous Wireless Communications Services Subpart C – Technical standards § 27.50 – Power and duty cycle limits § 27.53 – Emission limits § 27.54 – Frequency stability Part 24, Subpart E – Broadband PCS § 24.232 – Power and antenna height limits $ 24.235 – Frequency stability § 24.238 – Emission limitations for Broadband PCS equipment Part 90; Private Land Mobile Radio Services Subpart S—REGULATIONS GOVERNING LICENSING AND USE OF FREQUENCIES IN THE 806- 824, 851-869, 896-901, AND 935-940 MHZ BAN…

Text truncated - open the document above for the full version.