XPYUBX22EL01Multi-mode LTE Cat 1bis module

UBX-22015376 - R03 C1-Public www.u-blox.com LENA-R8 series Multi-mode LTE Cat 1bis modules System integration manual Abstract This document describes the features and integration guidelines for the LENA-R8 series modules. With 14 LTE bands and four GSM/GPRS bands, these modules offer universal network connectivity and global coverage. The integrated GNSS receiver based on the u-blox M10 platform make the modules ideal for demanding global tracking and telematic applications, enabling simpler, smaller devices with uncompromised GNSS performance. Connectivity and location services are supported and offer customer simple and efficient solution for cloud-based services such as CaaS and LaaS. LENA-R8 series - System integration manual UBX-22015376 - R03 Document information Page 2 of 116 C1-Public Document information Title LENA-R8 series Subtitle Multi-mode LTE Cat 1bis modules Document type System integration manual Document number UBX-22015376 Revision and date R03 17-Apr-2023 Disclosure restriction C1-Public Product status Corresponding content status Functional sample Draft For functional testing. Revised and supplementary data will be published later. In development / Prototype Objective specification Target values. Revised and supplementary data will be published later. Engineering sample Advance information Data based on early testing. Revised and supplementary data will be published later. Initial production Early production information Data from product verification. Revised and supplementary data may be published later. Mass production / End of life Production information Document contains the final product specification. This document applies to the following products: Product name Type number Modem version Application version PCN reference Product status LENA-R8001 LENA-R8001-00C-00 02.00 A01.07 UBX-22035617 Engineering sample LENA-R8001M10 LENA-R8001M10-00C-00 02.00 A01.22 UBX-23003229 Engineering sample u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only permitted with the express written permission of u-blox. The information contained herein is provided “as is” and u-blox assumes no liability for its use. No warranty, either express or implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent documents, visit www.u-blox.com. Copyright © u-blox AG. LENA-R8 series - System integration manual UBX-22015376 - R03 Contents Page 3 of 116 C1-Public Contents Document information ................................................................................................................................ 2 Contents .......................................................................................................................................................... 3 1 System description ............................................................................................................................... 6 1.1 Overview ........................................................................................................................................................ 6 1.2 Product features ......................................................................................................................................... 6 1.3 Architecture ................................................................................................................................................. 8 1.4 Pin-out ........................................................................................................................................................... 9 1.5 Operating modes .......................................................................................................................................14 1.5.1 Overview ..........................................................................................................................................14 1.5.2 Cellular operating modes ............................................................................................................14 1.5.3 GNSS operating modes ...............................................................................................................15 1.6 Cellular power management ...................................................................................................................17 1.6.1 Cellular supply input (VCC) .........................................................................................................17 1.6.2 Cellular RTC supply input / output (V_BCKP) ..........................................................................21 1.6.3 Cellular generic digital interfaces supply output (V_INT) .....................................................21 1.7 Cellular system function interfaces ......................................................................................................22 1.7.1 Cellular system power-on ............................................................................................................22 1.7.2 Cellular system power-off ...........................................................................................................23 1.7.3 Cellular system reset ...................................................................................................................25 1.8 Cellular antenna interface .......................................................................................................................25 1.8.1 Cellular antenna RF interface (ANT) .........................................................................................25 1.8.2 Cellular antenna detection (ANT_DET) ............................................…

Text truncated - open the document above for the full version.

UBX-23002526 - R04 U.S. Agent Designation 1/2 C1-Public U.S. Agent Designation Applicant name: u-blox AG Address: Zuercherstrasse 68, CH-8800 Thalwil, Switzerland Info: www.u-blox.com Subject: U.S. Agent Designation To: Federal Communications Commission - Authorization and Evaluation Division Equipment Authorization Branch Address: 7435 Oakland Mills Road Columbia, MD 21046 u-blox AG, as applicant, acknowledges their consent for the following contact located in the United States to act as their agent for service of process for all applications for which authorization is sought (FCC ID: XPYUBX22EL01 ; FRN: 0019077858): Name and company of U.S. agent: Dave Carey, u-blox San Diego, Inc. Physical U.S. address of agent: 12626 High Bluff Drive Suite 200 San Diego, CA 92130 FRN of U.S. agent: 0022185367 Email address of U.S. agent: [email protected] u-blox San Diego, Inc acknowledges their obligation to accept service of process on behalf of u-blox AG. u-blox AG accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.An expiration date for this letter does not exist. Sincerely, UBX-23002526 - R04 U.S. Agent Designation 2/2 C1-Public Signed for and on behalf of u-blox AG : Name Giulio Comar Position Certification Manager Date of issue 3 May 2023 Signature Signed for and on behalf of u-blox San Diego, Inc. : Name Dave Carey Position Senior Vice President Date of issue 3 May 2023 Signature

UBX-23002527 - R02 FCC Covered Equipment 1/1 C1-Public FCC Covered Equipment Applicant name: u-blox AG Address: Zuercherstrasse 68, CH-8800 Thalwil, Switzerland Info: www.u-blox.com Subject: FCC Covered Equipment To: Federal Communications Commission - Authorization and Evaluation Division Equipment Authorization Branch Address: 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, u-blox AG hereby certify that the equipment for which authorization is sought (FCC ID: XPYUBX22EL01) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signed for and on behalf of u-blox AG : Name Giulio Comar Position Certification Manager Date of issue 5 April 2023 Signature

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 4/5/2023 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: XPYUBX22EL01 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, _______________________ Signature Giulio Comar Certification Manager u-blox AG Address: Zuercherstrasse 68, CH-8800 Thalwil, Switzerland

05_G0M - 2208 - 1599_124001 ConReq - U_V02.doc 1/2 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 4/5/2023 Request for Confidentiality Company name: u-blox AG FCC ID: XPYUBX22EL01 In accordance with CFR 47 §0.457(d) and CFR 47 §0.459 of the Commission’s Rules, u- blox AG hereby requests confidentiality of following exhibits: Exhibit Type: Type of Confidentiality Requested Detailed block diagrams* x Long-term confidentiality Schematic diagrams* x Long-term confidentiality Detailed operational descriptions* x Long-term confidentiality Parts lists/ tune up information* x Long-term confidentiality External photos X Short-term confidentiality** Internal photos X Short-term confidentiality** Test setup photos X Short-term confidentiality** User’s manual X Short-term confidentiality** Short-term maximum confidentiality period: 180 days OR: Short-term confidentiality release date (product launch): 08/01/2023 * Exhibits not routinely made available to the public. ** Only if applicable: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. When the device is marketed the grantee must inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. 05_G0M - 2208 - 1599_124001 ConReq - U_V02.doc 2/2 Long-term confidentiality: The documents indicated as long-term confidential contain detailed system and equipment description and related information about the product which u-blox AG considers to be proprietary, confidential and a custom design and the information is not publicly available. Since the design is a basis from which future technological products will evolve, u-blox AG considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Short-term confidentiality (if applicable): u-blox AG requests the exhibits selected above as short-term confidential to be withheld from public view for the period as indicated above. When the device is marketed, u-blox AG. will inform the TCB to release the short-term confidentiality information withheld on the FCC equipment authorization website. Sincerely, Signature Giulio Comar Certification Manager u-blox AG Address: Zuercherstrasse 68, CH-8800 Thalwil, Switzerland

Modular Approval Request Letter Date: 2023-04-05 FCC ID: XPYUBX22EL01 Type of Equipment: LTE CAT-1 bis GSM/GPRS multimode module Herewith we state that the requirements according to FCC Part 15.212 are met and the module qualifies for a single modular transmitter approval. # Requirement as per 47 CFR Part 15 Subpart C §15.212 Conditions met? (Y/N) Realisation / Evidence in FORM 731 application filing i RF shielding The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Y All radio parts are fully shielded ii Buffered modulation/data inputs The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Y It’s part of the radio chipset implementation iii Power supply regulation The modular transmitter must have its own power supply regulation. Y PSU is integrated in the module, see schematic and block diagram iv Antenna requirements The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). Additional justification and details may be requested – please refer to KDB 996369 Y A default antenna is taken as reference, MPE is calculated in reports v Stand-alone test configuration The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). Y Module is solely mounted on his interface: see test report/ test set-up photos vi Labelling The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Y The module has it’s label, see label example vii Compliance on specific rule or operating requirements The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. Y The required FCC rules has been fulfilled and all instructions for maintaining compliance has been clearly stated in the user manual viii RF Exposure Radio frequency devices operating under the provisions of this part are subject to the radio frequency radiation exposure requirements specified in §§1.1307(b), 1.1310, 2.1091, and 2.1093 of this chapter, as appropriate. Applications for equipment authorization of modular transmitters under this section must contain a statement confirming compliance with these requirements. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Y RF exposure requirements are fulfilled for mobile configuration. The installation of the module is restricted to mobile host devices what is clearly stated in the installation instruction of the user manual. For portable applications OEM integrators need SAR evaluation and an own FCC ID. Sincerely, _______________________ Signature Giulio Comar Certification Manager u-blox AG Address: Zuercherstrasse 68, CH-8800 Thalwil, Switzerland

FCC ID: XPYUBX22EL01 LENA‐R8001, LENA‐R8001M10 G0M‐2208‐1599 LENA‐R8_back FCC ID: XPYUBX22EL01 LENA‐R8001, LENA‐R8001M10 G0M‐2208‐1599 LENA‐R8001_front FCC ID: XPYUBX22EL01 LENA‐R8001, LENA‐R8001M10 G0M‐2208‐1599 LENA‐R8001M10_front

FCC ID: XPYUBX22EL01 LENA‐R8001, LENA‐R8001M10 G0M‐2208‐1599 FCC ID: XPYUBX22EL01 LENA‐R8001, LENA‐R8001M10 G0M‐2208‐1599

Huarui7layersHighTechnology(Suzhou) Co.,Ltd. TowerN,InnovationCenter,88ZhuyiRoad, High-techDistrict,SuzhouCity,AnhuiProvince Tel:+86(0557)3681008 Page1of1ReportVersion1 ReferenceNo.:PSU-NQN2204290110FCCID:XPYUBX22EL01 PHOTOGRAPHSOFTHEEUT

Huarui7layersHighTechnology(Suzhou) Co.,Ltd. TowerN,InnovationCenter,88ZhuyiRoad, High-techDistrict,SuzhouCity,AnhuiProvince Tel:+86(0557)3681008 Page1of1ReportVersion1 ReferenceNo.:PSU-NQN2204290110-1FCCID:XPYUBX22EL01 PHOTOGRAPHSOFTHEEUT

FCC RF Exposure Test Report Report Format Version 5.0.0Issued Date:Nov. 25, 2022 Report No. : PSU-NQN2204290110-1SA03 FCC RF Exposure Test Report Report No.:PSU-NQN2204290110-1SA03 Applicant:U-BLOX AG Address:ZUERCHERSTRASSE 68, 8800 THALWIL, SWITZERLAND Product:LENA-R8001M10 FCC ID:XPYUBX22EL01 Brand:u-blox Model No.:LENA-R8001M10 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 Sample Received Date:Nov. 10, 2022 Date of Testing:Nov. 10, 2022~ Nov. 25, 2022 CERTIFICATION:The above equipment have been tested byHuarui 7Layers HighTechnology (Suzhou) Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies. Prepared By :Approved By : (Chao Wu / Engineer)(Peibo Sun /Manager) This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Nov.25,2022 ReportNo.:PSU-NQN2204290110-1SA03 TableofContents ReleaseControlRecord................................................................................................................................................................3 1.DescriptionofEquipmentUnderTest..................................................................................................................................4 2.MPE(MaximumPermissibleExposure)Assessment..........................................................................................................5 2.1Introduction....................................................................................................................................................................5 2.2RFRadiationExposureLimits.......................................................................................................................................5 2.3MPEAssessmentMethod.............................................................................................................................................6 2.4MPECalculationforStandaloneOperations.................................................................................................................6 3.InformationontheTestingLaboratories..............................................................................................................................7 FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Nov.25,2022 ReportNo.:PSU-NQN2204290110-1SA03 ReleaseControlRecord ReportNo.ReasonforChangeDateIssued PSU-NQN2204290110-1SA03InitialreleaseNov.25,2022 Note:ThisreportreferstothedataofPSU-NQN2204290110SA03（model:LENA-R8001）,thedifferenceof LENA-R8001andLENA-R8001M10isLENA-R8001M10addGPSandGalileofunction,changeHWversionand modelname.Inthisreport,alldataiscopiedfromthereportPSU-NQN2204290110SA03 （ model:LENA-R8001 ） . FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Nov.25,2022 ReportNo.:PSU-NQN2204290110-1SA03 1.DescriptionofEquipmentUnderTest EUTTypeLENA-R8001M10 FCCIDXPYUBX22EL01 BrandNameu-blox ModelNameLENA-R8001M10 TxFrequencyBands (Unit:MHz) GSM850:824.2MHz~848.8MHz GSM1900:1850.2MHz~1909.8MHz LTEBand2:1850.7MHz~1909.3MHz LTEBand4:1710.7MHz~1754.3MHz LTEBand5:824.7MHz~848.3MHz LTEBand7:2502.5MHz~2567.5MHz LTEBand12:699.7MHz~715.3MHz LTEBand38:2572.5MHz~2617.5MHz LTEBand41:2498.5MHz~2687.5MHz LTEBand66:1710.7MHz~1779.3MHz UplinkModulations GSM&GPRS:GMSK LTE:QPSK,16QAM AntennaTypeFixedExternalAntenna EUTStageProductionUnit Note: 1.TheaboveEUTinformationisdeclaredbymanufacturerandformoredetailedfeaturesdescriptionpleaserefers tothemanufacturer'sspecificationsorUser'sManual. FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Nov.25,2022 ReportNo.:PSU-NQN2204290110-1SA03 2.MPE(MaximumPermissibleExposure)Assessment 2.1Introduction Accordingto47CFR§2.1091,amobiledeviceisdefinedasatransmittingdevicedesignedtobeusedinotherthan fixedlocationsandtogenerallybeusedinsuchawaythataseparationdistanceofatleast20cmisnormally maintainedbetweenthetransmittingantennaandthebodyoftheuserornearbypersons.Inthiscontext,theterm “fixedlocation”meansthatthedeviceisphysicallysecure…

Text truncated - open the document above for the full version.

FCC RF Exposure Test Report Report Format Version 5.0.0Issued Date:Jul. 04, 2022 Report No. : PSU-NQN2204290110SA03 FCC RF Exposure Test Report Report No.:PSU-NQN2204290110SA03 Applicant:U-BLOX AG Address:ZUERCHERSTRASSE 68, 8800 THALWIL, SWITZERLAND Product:LENA-R8001 FCC ID:XPYUBX22EL01 Brand:u-blox Model No.:LENA-R8001 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 Sample Received Date:Jun. 06, 2022 Date of Testing:Jun. 06, 2022~ Nov 17, 2022 CERTIFICATION:The above equipment have been tested byHuarui 7Layers HighTechnology (Suzhou) Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies. Prepared By :Approved By : (Chao Wu / Engineer)(Peibo Sun /Manager) This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Jul.04,2022 ReportNo.:PSU-NQN2204290110SA03 TableofContents ReleaseControlRecord................................................................................................................................................................3 1.DescriptionofEquipmentUnderTest..................................................................................................................................4 2.MPE(MaximumPermissibleExposure)Assessment..........................................................................................................5 2.1Introduction....................................................................................................................................................................5 2.2RFRadiationExposureLimits.......................................................................................................................................5 2.3MPEAssessmentMethod.............................................................................................................................................6 2.4MPECalculationforStandaloneOperations.................................................................................................................6 3.InformationontheTestingLaboratories..............................................................................................................................7 FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Jul.04,2022 ReportNo.:PSU-NQN2204290110SA03 ReleaseControlRecord ReportNo.ReasonforChangeDateIssued PSU-NQN2204290110SA03InitialreleaseNov.17,2022 FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Jul.04,2022 ReportNo.:PSU-NQN2204290110SA03 1.DescriptionofEquipmentUnderTest EUTTypeLENA-R8001 FCCIDXPYUBX22EL01 BrandNameu-blox ModelNameLENA-R8001 TxFrequencyBands (Unit:MHz) GSM850:824.2MHz~848.8MHz GSM1900:1850.2MHz~1909.8MHz LTEBand2:1850.7MHz~1909.3MHz LTEBand4:1710.7MHz~1754.3MHz LTEBand5:824.7MHz~848.3MHz LTEBand7:2502.5MHz~2567.5MHz LTEBand12:699.7MHz~715.3MHz LTEBand38:2572.5MHz~2617.5MHz LTEBand41:2498.5MHz~2687.5MHz LTEBand66:1710.7MHz~1779.3MHz UplinkModulations GSM&GPRS:GMSK LTE:QPSK,16QAM AntennaTypeFixedExternalAntenna EUTStageProductionUnit Note: 1.TheaboveEUTinformationisdeclaredbymanufacturerandformoredetailedfeaturesdescriptionpleaserefers tothemanufacturer'sspecificationsorUser'sManual. FCCRFExposureTestReport ReportFormatVersion5.0.0IssuedDate:Jul.04,2022 ReportNo.:PSU-NQN2204290110SA03 2.MPE(MaximumPermissibleExposure)Assessment 2.1Introduction Accordingto47CFR§2.1091,amobiledeviceisdefinedasatransmittingdevicedesignedtobeusedinotherthan fixedlocationsandtogenerallybeusedinsuchawaythataseparationdistanceofatleast20cmisnormally maintainedbetweenthetransmittingantennaandthebodyoftheuserornearbypersons.Inthiscontext,theterm “fixedlocation”meansthatthedeviceisphysicallysecuredatonelocationandisnotabletobeeasilymovedto anotherlocation.Transmittingdevicesdesignedtobeusedbyconsumersorworkersthatcanbeeasilyre-located, suchaswirelessdevicesassociatedwithapersonalcomputer,areconsideredtobemobiledevicesiftheymeetthe 20cmseparationrequirement.ThelimitstobeusedforMPEevaluati…

Text truncated - open the document above for the full version.

Huarui 7layers High Technology (Suzhou) Co., Ltd. Tower N, Innovation Center, 88 Zhuyi Road, High-tech District, Suzhou City, Anhui Province Tel: +86 (0557) 368 1008 Page 1 of 24 Report Version 1 Test Report No.: PSU-NQN2204290110-1EM03 EMC TEST REPORT Applicant: u-blox AG Address: Zuercherstrasse 68, 8800 Thalwil, Switzerland Manufacturer or …

Text truncated - open the document above for the full version.