XPYUBX23AD01Cat1 bis data only module

UBXDOC-51455665-28016 - R01 U.S. Agent Designation 1/ 2 C1-Public U.S. Agent Designation Applicant name: u-blox AG Address: Zurcherstrasse 68, CH-8800 Thalwil, Switzerland Info: www.u-blox.com Subject: U.S. Agent Designation To: Federal Communications Commission - Authorization and Evaluation Division Equipment Authorization Branch Address: 7435 Oakland Mills Road Columbia, MD 21046 u-blox AG, as applicant, acknowledges their consent for the following contact located in the United States to act as their agent for service of process for all applications for which authorization is sought (FCC ID: XPYUBX23AD01; FRN: 0019077858): Name and company of U.S. agent: Dave Carey, u-blox San Diego, Inc. Physical U.S. address of agent: 12626 High Bluff Drive Suite 200 San Diego, CA 92130 FRN of U.S. agent: 0022185367 Email address of U.S. agent: [email protected] u-blox San Diego, Inc acknowledges their obligation to accept service of process on behalf of u-blox AG. u-blox AG accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01.An expiration date for this letter does not exist. Sincerely, UBXDOC-51455665-28016 - R01 U.S. Agent Designation 2/ 2 C1-Public Signed for and on behalf of u-blox AG : Name Giulio Comar Position Certification Manager Date of issue 15 April 2024 Signature Signed for and on behalf of u-blox San Diego, Inc. : Name Dave Carey Position Senior Vice President Date of issue 15 April 2024 Signature

Certifications concerning “covered” equipment (as required by section 2.911(d)(5)(i)-(ii)) Date: 17/04/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: XPYUBX23AD01 To whom it may concern: We, u-blox AG Zurcherstrasse 68 Thalwil Ch-8800 Switzerland hereby certify that, • the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. • as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, By: Giulio Comar Title: Certification Manager Telephone: +39 040 2603 757 e-mail: [email protected]

Confidentiality request Date: 17/04/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: XPYUBX23AD01 To whom it may concern: We, u-blox AG Zurcherstrasse 68 Thalwil Ch-8800 Switzerland hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent Operation Description Short Term Permanent Schematics Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent SDR Software and Security Information Short Term Test Setup Photos Short Term User’s Manual Short Term External Photos Short Term Internal Photos Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA Testing and Certification S.A.U. in the event information regarding the product or the product is made available to the public. DEKRA Testing and Certification S.A.U. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: Giulio Comar Title: Certification Manager Telephone: +39 040 2603 757 e-mail: [email protected]

Supplier’s Declaration of Conformity (SDoC) Date: 17/04/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: XPYUBX23AD01 To whom it may concern: We, u-blox AG Zurcherstrasse 68 Thalwil Ch-8800 Switzerland pursuant to §15.101 of the Commission’s Rules (47 C.F.R.), hereby declare that the device above mentioned is classified under the following equipment class/classes: JAB Part 15 Class B Digital Device JAD Part 15 Class A Digital Device JAV Other Non-Digital SDoC Devices JBP Part 15 Class B Computing Device Peripheral JBC Part 15 Class B Computing Device/Personal Computer CXX Communications Rcvr for use w/ licensed Tx and CBs CRR Superregenerative Receiver CYY Communications Receiver used w/Pt 15 Transmitter HID Part 15 TV Interface Device and we will follow the Supplier’s Declaration of Conformity authorization procedure prior to the initiation of marketing. Sincerely, By: Giulio Comar Title: Certification Manager Telephone: +39 040 2603 757 e-mail: [email protected]

Modular approval letter Date: 17/04/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: XPYUBX23AD01 To whom it may concern: We, u-blox AG Zurcherstrasse 68 Thalwil Ch-8800 Switzerland through the following attestation, hereby address the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. Sincerely, By: Giulio Comar Title: Certification Manager Telephone: +39 040 2603 757 e-mail: [email protected]

Agent letter Date: 17/04/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: XPYUBX23AD01 To whom it may concern: We, u-blox AG Zurcherstrasse 68 Thalwil Ch-8800 Switzerland hereby authorize, DEKRA Testing and Certification S.A.U. Parque Tecnológico de Andalucía C/Severo Ochoa, 2 & 6 | 29590 | Málaga | Spain Agent: Álvaro Corrales Sedeño e-mail: [email protected] Phone: +34 952 619 198 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, By: Giulio Comar Title: Certification Manager Telephone: +39 040 2603 757 e-mail: [email protected]

Modular approval letter - Licensed Date: 17/04/2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: XPYUBX23AD01 To whom it may concern: We, u-blox AG Zurcherstrasse 68 Thalwil Ch-8800 Switzerland through the following attestation, hereby address the fourth requirement to support modular approval • This device is designed for mobile or fixed operation; portable operation is subject to a Class 2 permissive change application or to a new and separate FCC ID. • The maximum antenna gain is limited to those calculated in the RF exposure exhibit. • The product has a FCC ID label on the device itself. Also, the OEM host end product manufacturer will be informed to display a label referring to the enclosed module. • We request to include in the grant the following words in the device description or grant notes: “modular transmitter” or “transmitter module”. If there are any additional questions or if further information is needed, please contact us. Sincerely, By: Giulio Comar Title: Certification Manager Telephone: +39 040 2603 757 e-mail: [email protected]

Shi yan 2023.10.19 Cao Baoyin 2023.10.19 Cao Baoyin 2023.10.19 1:1 Module label LEXI-R10 DN5050E05 PRINTED LABELBLANK LABEL 6060A2339202 Note 1 Printfull black and red Pantone 485C 2 Tolerance±0.1mm 3 Stick on Module 4 MaterialPOLYONEYXF581T(+)=0.063±0.002mm (1).Material requirements Item Limits Adhesive thickness < 0.0020 in. (0.051 mm) 180 degrees peel adhesion 24 hours dell 35 oz/in (39 N/100mm) 72 hours dwell 50 oz/in (55N/100mm) Coated film thickness < 0.0027 in. (0.068 mm) Flammability Average Burn Time < 2 seconds Dielectric strength > 8kv (2).Thermal performance characteristics Item Limits Short Term High Service Temperature 80 seconds at 600°F (315°C) 2 hours at 338°F (170°C) No visible effect, label remains functional Long Term High Service Temperature 1000 hours at 212°F (100°C) No visible effect, label remains functional (3).Chemical resistance Label shall comply with MIL-STD-202G, Method 215K 5 Information (1).Model name*: LEXI-xxxx (2).Product grade and version* : xxX-00 (3).Production week: YY=Last two digit of year; WW=Calendar week 01..53 (4).Datacode: 8xxxxx.xxxx.000 (5).Country of manufacturing plant: Made in Malaysia * Model and product grade together are the “Type number” 6 2D Datamatrix code content e4 Pb LEXI-R10 e4 Pb LR10401D-00B e4 Pb R10401D 00B-00 Cao, Bao-Yin Cao, Bao-Yin Cao, Bao-Yin Shi yan Shi yan Shi yan First version Added LR10401D & LR10801D for LEXI Remove CE logo for LR10401D & LR10801D 2023.10.19 2023.11.02 2023.11.13 Cao, Bao-YinShi yanPrinted “made in Malaysia”2023.11.23 Cao, Bao-YinShi yan Added LR10801D-00C1B Added CE logo,Remove FCC&IC for LR10801D-00B Added FCC&IC for LR10401D-00B 2024.1.23 1 2 3 4 5 LR10801D-00B e4 Pb R10801D 00B-00 LR10801D-00C1B e4 Pb R10801D 00C1B-00

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 77195RAN.001A1 2024-05-30 Test report No: NIE: 77195RAN.001A1 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091 (*) Identification of item under evaluation Cat1 bis data only module (*) Trademark u-blox (*) Model and /or type reference LEXI-R10401D (*) Other identification of the product HW version: UBX-437C01 SW Version: 01.00.A00.03 IMEI TAC: 35831453, 35755524 FCC ID: XPYUBX23AD01 IC ID: 8595A-UBX23AD01 (*) Features LTE Cat1 bis, Wi-fi Scan / Locate (*) Manufacturer u-blox AG Zürcherstrasse 68, CH-8800 Thalwil, Switzerland Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Summary IN COMPLIANCE Approved by (name / position & signature) Miguel Lacave Antennas Lab Manager Date of issue 2024-05-30 Report template No FAN36_01 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 77195RAN.001A1 Page 2 of 9 2024-05-30 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 3 Document history ........................................................................................................................ 3 Appendix A: FCC RF Exposure assessment result ..................................................................... 4 General description of the equipment under evaluation ............................................................ 5 Maximum Antenna Gain determination for RF Exposure compliance ....................................... 5 Appendix B: FCC RF Exposure information ................................................................................ 7 FCC RF Exposure evaluation ................................................................................................... 8 FCC MPE Evaluation ................................................................................................................ 9 FCC Cellular bands limits ......................................................................................................... 9 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 77195RAN.001A1 Page 3 of 9 2024-05-30 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item under evaluation", "Trademark", "Model and/or type reference", “General description of the device”, “Other identification of the product”). 2. Request for evaluation under mobile exposure conditions. 3. The device under evaluation consists of a Cat1 bis data only module for industrial IoT applications. DEKRA Testing and Certification, S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Identification of the client Company name: u-blox AG Postal address: Zürcherstrasse 68, CH-8800 Thalwil, Switzerland Contact person: Giulio Comar Telephone / e-mail: +39 040 2603 757 / [email protected] Document history Report number Date Description 77195RAN.001 2024-04-02 First release 77195RAN.001A1 2024-05-30 Second release. Maximum conducted Output power has been updated. This test report cancels and replaces the report number 77195RAN.001. DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 77195…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 2024-06-21 Tests conditions marked with “#” are out of the scope of ENAC accreditation ISED CABid: ES1909 Lab. Company Number: 4621A Test Report No: 77195RRF.002A3 Test Report USA FCC Part 24 CANADA RSS-133 (*) Identification of item tested Cat1 bis data only module (*) Trademark u-blox (*) Model and /or type reference LEXI-R10401D Other identification of the product FCC ID: XPYUBX23AD01 IC: 8595A-UBX23AD01 (*) Features LTE Cat1 bis, Wi-fi Scan / Locate HW version: UBX-437C01 SW version: 01.00.A00.03 Applicant u-blox AG Zürcherstrasse 68, CH-8800 Thalwil, Switzerland Test method requested, standard USA FCC Part 24 (10-1-23 Edition). CANADA RSS-133 Issue 6, Jan. 2018 Amendment 1. ANSI C63.26-2015. KDB 971168 D01 Power Meas License Digital Systems v03r01, April. 2018. Summary IN COMPLIANCE Approved by (name / position & signature) José Manuel Gómez Galván EMC Consumer & RF Lab. Manager Date of issue 2024-06-21 Report template No FDT08_24 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 2 of 64 2024-06-21 Index Competences and guarantees ...................................................................................................................... 3 General conditions ......................................................................................................................................... 3 Uncertainty ..................................................................................................................................................... 3 Data provided by the client ............................................................................................................................ 3 Usage of samples .......................................................................................................................................... 4 Test sample description ................................................................................................................................. 4 Identification of the client ............................................................................................................................... 5 Testing period and place ............................................................................................................................... 5 Document history ........................................................................................................................................... 5 Environmental conditions .............................................................................................................................. 5 Remarks and comments ................................................................................................................................ 6 Testing verdicts .............................................................................................................................................. 7 Summary ....................................................................................................................................................... 7 Appendix A: Test results for FCC 24 / RSS-133 ........................................................................................... 8 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 3 of 64 2024-06-21 Competences and guarantees DEKRA Testing and Certification is a testing laboratory accredited by the National Accreditation Body (ENAC - Entidad Nacional de Acreditación) to perform the tests indicated in the Certificate No. 51/LE 147. Tests conditions marked with “#” are out of the scope of ENAC accreditation. DEKRA Testing and Certification is an FCC-recognized accredited testing laboratory with appropriate scope of accreditation that covers the performed tests in this report. DEKRA Testing and Certification is an ISED-recognized accredited testing laboratory, CABid: ES1909, Company Number: 4621A, with the appropriate scope of accreditation that covers the performed tests in this report. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and it is based on the knowledge and technical facilities available at DEKRA Testing and Certification at the time of performance of the test. DEKRA Testing and Certification is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 41 of 64 2024-06-21 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 42 of 64 2024-06-21 LTE Cat 1bis Band 2. BW=20 MHz. QPSK. RB Size=All. Channel Low Middle High 99% Occupied Bandwidth (MHz) 17.947 17.907 17.867 -26 dBc Bandwidth (MHz) 19.667 19.707 19.680 Measurement uncertainty (kHz) <±3.75 LTE Cat 1bis Band 2. BW=20 MHz. 16QAM. RB Size=All. Channel Low Middle High 99% Occupied Bandwidth (MHz) 4.724 4.828 4.708 -26 dBc Bandwidth (MHz) 6.261 6.475 6.214 Measurement uncertainty (kHz) <±3.75 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 43 of 64 2024-06-21 LTE Cat 1bis Band 2. BW=20 MHz. QPSK. RB Size=All. Low Channel: Middle Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 44 of 64 2024-06-21 High Channel: LTE Cat 1bis Band 2. BW=20 MHz. 16QAM. RB Size=All. Low Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 45 of 64 2024-06-21 Middle Channel: High Channel: DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 46 of 64 2024-06-21 Spurious emissions at antenna terminals Limits * FCC §2.1051 and §24.238. RSS-133, 6.5. The power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. Compliance with these rules is based on the use of measurement instrumentation employing a resolution bandwidth of 1 MHz or greater. At Po transmitting power, the specified minimum attenuation becomes 43+10 log (Po), and the level in dBm relative to Po becomes: Po (dBm) - [43 + 10 log (Po in mW) - 30] = -13 dBm Method The EUT RF output connector was connected to a spectrum analyser and to the Universal Radio Communication tester R&S CMW500 (selecting maximum transmission power of the EUT and different modes of modulation) using a 50-Ohm attenuator and a power divider. The reading of the spectrum analyser is corrected with the attenuation loss of connection between output terminal of EUT and input of the spectrum analyser. The configuration of Resource Blocks and modulation which is the worst case for conducted power was used. Test Setup DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 47 of 64 2024-06-21 Results LTE Cat 1bis Band 2: A preliminary scan determined the worst-case: BW=20 MHz. QPSK. RB Size=1. RB Offset=49. The next results are for this worst-case configuration. Frequency range 9 KHz - 20 GHz: - Low Channel: Spurious frequencies at less than 20 dB below the limit: Frequency (MHz) Emission limitations conducted (dBm) 5579.9735 -29.2 - Middle Channel: No spurious frequencies at less than 20 dB below the limit. - High Channel: No spurious frequencies at less than 20 dB below the limit. Measurement uncertainty (dB): <±2.76 Verdict: PASS DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 48 of 64 2024-06-21 LTE Cat 1bis Band 2: BW=20 MHz. QPSK. RB Size=1. RB Offset=49. Subrange Step Size Detectors Bandwidth Sweep Time Preamp Receiver: [FSV 40] 9 kHz - 150 kHz 14,1 Hz PK+ 300 Hz Coupled 0 dB 150 kHz - 30 MHz 932,812 Hz PK+ 10 kHz Coupled 0 dB 30 MHz - 1 GHz 303,125 kHz PK+ 1 MHz Coupled 0 dB 1 GHz - 10 GHz 281,25 kHz PK+ 1 MHz Coupled 0 dB 10 GHz - 20 GHz 312,5 kHz PK+ 1 MHz Coupled 0 dB Low Channel: The peak above the limit is the carrier frequency. Middle Channel: Level in dBm Level in dBm DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: 77195RRF.002A3 Page 49 of 64 2024-06-21 The peak above the limit is the carrier frequency. High Channel: The peak above the limit is the carrier frequency. Level in dBm DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andaluc…

Text truncated - open the document above for the full version.