XYEE100Emergency Position Indicating Radio Beacon (EPIRB)

Ocean Signal User Manual for the SafeSea E100 SafeSea E100G Emergency Position Indicating Radio Beacons 2 In Case of Emergency WARNING USE ONLY IN SITUATIONS OF GRAVE AND IMMINENT DANGER Remove the EPIRB from its mounting or housing To manually activate EPIRB BREAK COVER Remove the lanyard cover, holding on to the free end of the lanyard and throw the EPIRB into the water Break the switch cover Slide and hold the Green switch to the left. Slide the Red switch into the down position 3 EPIRB Programming Details Insert your EPIRB programming details, as indicated on the side of your EPIRB, into the form below. UIN: ................................................................................................ Vessel Name: ................................................................................................ MMSI: ................................................................................................ Country: ................................................................................................ Call Sign: ................................................................................................ 4 Contents In Case of Emergency .....................................................................................2 Contents ..........................................................................................................4 1: Introduction ..................................................................................................5 2: Registration..................................................................................................6 2.1: Programming Details .............................................................................8 3: Installation....................................................................................................9 3.1: Location.................................................................................................9 3.2: Float Free Housing ................................................................................9 3.2.1: Loading the EPIRB .........................................................................9 3.3: Mounting Cradle ..................................................................................10 3.3.1: Loading the EPIRB .......................................................................10 4: Operation ...................................................................................................12 4.1: Manual Operation................................................................................12 4.1.1: Releasing from an Enclosure........................................................12 4.1.2: Releasing from a Bracket..............................................................13 4.1.3: Manually Operating the EPIRB .....................................................13 4.2: Automatic Operation............................................................................14 4.3: De-activation .......................................................................................14 4.3.1: De-activation from Manual operation ............................................14 4.3.2: De-activation from Automatic Operation .......................................15 5: False Alerts ................................................................................................16 5.1: Disabling the EPIRB ............................................................................16 6: Maintenance ..............................................................................................17 6.1: Self Test Mode ....................................................................................17 6.2: GNSS Self Test Mode .........................................................................19 6.3: Inspection ............................................................................................20 6.4: Battery Installation / Replacement.......................................................21 6.5: HRU Installation / Replacement.......................................................21 6.6: Service & Warranty .............................................................................22 7: Technical Information.................................................................................24 7.1: System Overview ................................................................................24 7.2: GPS System........................................................................................24 7.3: Technical Specification........................................................................25 5 1: Introduction This manual provides valuable in formation for the installation, operation and maintenance for both the SafeSea E100 and SafeSea E100G. It covers the operation for both the: SafeSea E100 EPIRB & SafeSea E100G EPIRB with GPS Please read this manual completely before using your EPIRB. Parts of this manual apply to the E100G only. 6 2: Registration WARNING THE OWNER OF THIS 406MHz EPIRB MUST REGISTER IT WITH THE APPROPRIATE NATIONAL AUTHORITY. FAILURE TO REGISTER THIS EPIRB MAY RESULT IN A FINE, SLOWING THE RESCUE PROCESS OR EVEN LOSS OF LIFE. All 406MHz EPIRBs are programmed with a unique identity number (UIN), which is based upon the country of registration. This is normally the country to which the vessel is flagged. Registration provides the Search and Rescue authorities with the correct emergency contact details, which will speed up the rescue process. Once registration has been performed you should receive a “decal” sticker which must be affixed to the area on the EPIRB marked “Attach proof of registration in this area”. This decal is your proof of registration. Useful registration contacts are: UK EPIRB Registry HM Coastguard (Southern) Pendennis Point Castle Drive Falmouth TR11 4WZ For online UK registration go to:- http://www.ukshipregister.co.uk/mcga07-home/emergencyresponse/mcga- searchandrescue/epirb.htm NOAA/SARSAT NSOF, E/SP3 4231 Suitland…

Text truncated - open the document above for the full version.

Registration No 6627101 Vat No 938 4374 89 Registered Office 27 New Dover Road Canterbury Kent CT1 3DN FCCID: XYEE100 Request for Confidentiality With reference to the conditions laid out in CFR47 parts 0.457 and 0.459, Ocean Signal respectfully requests that the following categories of documents submitted with this application remain confidential and are not made available for public inspection. These documents contain commercially sensitive information which is the intellectual property of Ocean Signal Ltd. Operational Descriptions (containing block diagrams and circuit descriptions) Schematics Parts Lists/Tune Up Information I thank you for your cooperation in this matter. Signed on behalf of Ocean Signal Ltd David Sheekey Product and Approvals Manager 25 th November 2010 Federal Communications Commission 445 12 th Street, SW Washington DC 20554 United States of America Attn: Reviewing Officer 24 th November 2010 Federal Communications Commission 445 12 th Street, SW Washington DC 20554 United States of America Attn: Reviewing officer

Registration No 6627101 Vat No 938 4374 89 Registered Office 27 New Dover Road Canterbury Kent CT1 3DN Reference US000436: E100 Dear Allen, The Cospas-Sarsat test reports submitted to BABT for FCC equipment authorisation contain documentation with the name of Coverise Ltd on. At the time of submission of the documentation to the test house this company was known as Coverise Ltd. At the time of public launch of the company, the company name was changed to Ocean Signal Ltd. This is the exactly the same company with the exception of the name change. Any information contained in these test reports is the property of Ocean Signal Ltd. Yours sincerely David Sheekey Product and Approvals Manager 2 December 2010 BABT Forsyth House Churchfield Road Walton-onThames KT12 2TD Attn: Allen Ferry

Ocean Signal SafeSea E100 EPIRB – External Photographs Shown with supplied bulkhead mounting bracket Figure 1: E100/E100G EPIRB – Front View Figure 2: E100/E100G EPIRB – Left Hand Side View Figure 3: E100/E100G EPIRB - Right Hand Side View Approval information, including the FCC Identifier, will be printed here. Figure 4: E100/E100G EPIRB – Rear View Figure 5: E100 EPIRB - Top View Figure 6: E100G GPS EPIRB - Top View Figure 7: E100/E100G EPIRB – Base View Figure 8: E100/E100G Battery connections Figure 9: ARH100 Auto Release Housing Figure 10: ARH100 Auto Release Housing with cover removed, showing HR1E hydrostatic release and EPIRB installed.

Ocean Signal SafeSea E100 EPIRB – Approval Labelling The following label will show the approval information for the SafeSea E100 and E100G EPIRBs. As shown, the label currently includes the European Wheelmark and the FCC Identifier. Other nation’s approvals identifiers may appear when granted. Other important labels are shown here for reference. Figure 1: E100 EPIRB – Approvals Label Figure 2: E100 EPIRB – Location of Approvals Label Figure 3: USCG required text Figure 4: Overall view of main label Figure 5: Label for user to enter EPIRB details ~10.7”

Ocean Signal SafeSea E100/E100G EPIRB – Internal Photographs Photos of the PCBs used in the E100 and E100G (GPS fitted) EPIRBs follow. Figure 1: E100 EPIRB PCB – Front Side Figure 2: E100G EPIRB PCB – Front Side Figure 3: E100 EPIRB PCB – Rear Side Figure 4: E100 EPIRB PCB – Ground Plane PCB Figure 5: E100G EPIRB PCB – Ground Plane PCB with GPS antenna

PUBLIC ENTERPRISE TESTING CENTER «OMEGA» TEST REPORT No. 10/26 Issue 1 on type approval of COSPAS-SARSAT Emergency Position Indicating Radio Beacon (EPIRB) SafeSea model E100G class 2, Manufacturer Coverise Ltd., Great Britain Volume 1 Sevastopol 2010 April 27, 2010 PE TC «Omega» Protocol 10/26 Volume 1 Issue 1 page 2 of 215 Ф.П10.16-05 2 PUBLIC ENTERPRISE TESTING CENTER «OMEGA» COSPAS-SARSAT Ref.CS497/F530 21/09/1994 Certificate of Accreditation of Testing Laboratory No. АКР.0304-14 РМФ dated 06.02.2004 issued by Ministry of transport of the Russian Federation Certificate of Accreditation РОСС UA.0001.21МО98 dated 08.08.2005 issued by Federal Agency on Technical Regulating and Metrology of the Russian Federation Certificate of Accreditation of Testing Laboratory No.07.61177.184 dated 21.08.2007 issued by Russian Maritime Register of Shipping P.O.B. No.37, Sevastopol, 99053, Ukraine Phone: +380 692 240 373 Fax: +380 692 469 679 E-mail: : [email protected] Basis Contract No. 10–512/20–697 Equipment under test Emergency Position Indicating Radio Beacon (EPIRB) 406 MHz COSPAS–SARSAT Manufacturer Coverise Ltd., Great Britain, registered office 27 New Dover Road, Canterbury, Kent, CTI 3DN Applicant Coverise Ltd., Great Britain, registered office 27 New Dover Road, Canterbury, Kent, CTI 3DN Test commencement date 18.01.10 Test completion date 15.04.10 Coverise Ltd. (for submission to COSPAS-SARSAT Secretariat for consideration ) copy 1 Test reports shall be delivered to: PE TC “Omega” copy 2 The results of this report shall be applied only to the tested samples Copying or replication of this report or any part of it is prohibited without prior written permission of PE TC “Omega” PE TC «Omega» Protocol 10/26 Volume 1 Issue 1 page 3 of 215 Ф.П10.16-05 3 CONTENTS 1. EQUIPMENT UNDER TEST.....................................................................................................................................................4 1.1 Equipment category ...........................................................................................................................................................4 1.2 Equipment trade mark........................................................................................................................................................4 1.3 Equipment type ..................................................................................................................................................................4 1.4 Equipment model ...............................................................................................................................................................4 1.5 Equipment class .................................................................................................................................................................4 1.6 Equipment serial numbers..................................................................................................................................................4 1.7 Equipment destination .......................................................................................................................................................4 1.8 Firmware............................................................................................................................................................................4 1.9 Submitted Documentation .................................................................................................................................................5 2. TEST CONDITIONS AND METODS .......................................................................................................................................6 3. TEST PROGRAM.......................................................................................................................................................................6 4. TEST SHEDULE ........................................................................................................................................................................7 5. TEST RESULT ...........................................................................................................................................................................8 6. CONCLUSION ...........................................................................................................................................................................9 TABLE F.1: OVERALL SUMMARY OF 406 MHZ “SAFESEA E100G CLASS 2” BEACON TEST RESULTS ........................10 ANNEX 1 ELECTRICAL AND FUNCTIONAL PERFORMANCE MEASUREMENTS AT CONSTANT TEMPERATURE ...16 ANNEX 1.1 PERFORMANCE MEASUREMENTS AT NORMAL TEMPERATURE 20 °C ..................................................18 ANNEX 1.2 PERFORMANCE MEASUREMENTS AT MAXIMUM DECLARED TEMPERATURE +55 °C ......................30 ANNEX 1.3 PERFORMANCE MEASUREMENTS AT MINIMUM DECLARED TEMPERATURE MINUS 20 °C ............42 ANNEX 2 THERMAL SHOCK TEST .............................................................................................................................................54 ANNEX 3 FREQUENCY STABILITY TEST WITH TEMPERATURE GRADIENT ...................................................................59 ANNEX 4 OPERATING LIFETIME AT MINIMUM TEMPERATURE (MINUS 20 O C) .............................................................64 ANNEX 5 BEACON ANTENNA TEST ..........................................................................................................................................81 ANNEX 5.1 TEST CONFIGURATION 1: “WATER” GROUND PLANE ................................................................................82 ANNEX 5.2 TEST CONFIGURATION 2: BEACON ABOVE GROUND PLANE...................................................................85 ANNEX 6 BEACON CODING SOFTWARE ...................................................................................................…

Text truncated - open the document above for the full version.

PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 1 of 86 PUBLIC ENTERPRISE TESTING CENTER «OMEGA» TEST REPORT No. 10/26 Issue 1 on type approval of COSPAS-SARSAT Emergency Position Indicating Radio Beacon (EPIRB) SafeSea model E100G class 2, Manufacturer Coverise Ltd., Great Britain Volume 2 The technical documentation submitted by the Manufacturer for testing Sevastopol 2010 April 27, 2010 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 2 of 86 CONTENTS 1. APPLICATION FOR A COSPAS-SARSAT 406 MHZ BEACON TYPE APPROVAL CERTIFICATE SIGNED BY THE MANUFACTURER TO CONFIRM THE TECHNICAL DETAILS OF THE BEACON ........................................... 3 2. ANALYSIS AND CALCULATIONS PRE-TEST BATTERY DISCHARGE AT AMBIENT TEMPERATURE BEFORE THE OPERATING LIFETIME AT MINIMUM TEMPERATURE TEST. ........................................................... 9 3. THE MANUFACTURER’S DECLARATION ABOUT OPERATOR SELECTABLE MODE OF OPERATION (THAT DRAWS THE MAXIMUM BATTERY ENERGY AND THE MAXIMUM PULSE CURRENT). ................................... 19 4. BEACON OPERATING INSTRUCTIONS AND A TECHNICAL DATA SHEET. DECLARATION ABOUT FIRMWARE VERSION. ...................................................................................................................................................... 21 5. THE MANUFACTURER’S DECLARATION ABOUT ALL OPERATION CONFIGURATIONS......................... 47 6. THE TECHNICAL DATA SHEET FOR THE BATTERY CELLS USED IN THE BEACON AND THE ELECTRIC DIAGRAM OF THE BEACON’S BATTERY PACK.......................................................................................................... 49 7. A COPY OF THE BEACON LABEL ......................................................................................................................... 53 8. THE TECHNICAL DATA SHEET OF THE REFERENCE OSCILLATOR............................................................. 58 9. DESCRIPTIONS TO DEMONSTRATE THAT THE DESIGN PROVIDES PROTECTION AGAINST CONTINUOUS TRANSMISSION ....................................................................................................................................... 63 10. DESCRIPTIONS TO DEMONSTRATE THAT THE DESIGN MEETS THE FREQUENCY STABILITY REQUIREMENTS OVER 5 YEARS.................................................................................................................................... 65 11. DESCRIPTIONS TO DEMONSTRATE THAT THE DESIGN PROVIDES PROTECTION FROM REPETITIVE SELF-TEST MODE TRANSMISSIONS.............................................................................................................................. 72 12. A TECHNICAL DESCRIPTION THAT CONFIRMS THE NOMINAL OUTPUT IMPEDANCE OF THE BEACON POWER AMPLIFIER IS 50 OHMS AND THE BEACON ANTENNA INPUT IMPEDANCE IS 50 OHMS.................. 74 13. THE BEACON QUALITY ASSURANCE PLAN ...................................................................................................... 76 14. DESCRIPTION OF THE GNSS RECEIVER OPERATION CYCLE AND ITS PHASES, INCLUDING DURATION AND AVERAGE BATTERY CURRENT MEASURED FOR EACH PHASE................................................................... 79 15. DECLARATION OF ALL MANUALLY SELECTABLE OPERATION MODES.................................................. 81 16. NAVIGATION SYSTEM TEST RESULTS WITH TEST SCRIPTS WHICH REPLICATE THE LOCATION INFORMATION CONDUCTED BY MANUFACTURER ................................................................................................ 83 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 3 of 86 1. APPLICATION FOR A COSPAS-SARSAT 406 MHZ BEACON TYPE APPROVAL CERTIFICATE SIGNED BY THE MANUFACTURER TO CONFIRM THE TECHNICAL DETAILS OF THE BEACON section 5 a. i. – v. C/S T.007 annex G.1 and annex G.2 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 4 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 5 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 6 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 7 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 8 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 9 of 86 2. ANALYSIS AND CALCULATIONS PRE-TEST BATTERY DISCHARGE AT AMBIENT TEMPERATURE BEFORE THE OPERATING LIFETIME AT MINIMUM TEMPERATURE TEST. Section 5 c. C/S T.007 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 10 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 11 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 12 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 13 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 14 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 15 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 16 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 17 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 18 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 19 of 86 3. THE MANUFACTURER’S DECLARATION ABOUT OPERATOR SELECTABLE MODE OF OPERATION (THAT DRAWS THE MAXIMUM BATTERY ENERGY AND THE MAXIMUM PULSE CURRENT). Section 5 d. C/S T.007 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 20 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 21 of 86 4. BEACON OPERATING INSTRUCTIONS AND A TECHNICAL DATA SHEET. DECLARATION ABOUT FIRMWARE VERSION. Section 5 e. C/S T.007 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 22 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 23 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 24 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 25 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 26 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 27 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 28 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 29 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 30 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 31 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 32 of 86 PE TC «Omega» Protocol 10/26 Volume 2 Issue 1 page 33 of 8…

Text truncated - open the document above for the full version.

PUBLIC ENTERPRISE TESTING CENTER «OMEGA» TEST REPORT No. 10/27 Issue 1 on type approval of COSPAS-SARSAT Emergency Position Indicating Radio Beacon (EPIRB) SafeSea model E100 class 2, Manufacturer Coverise Ltd., Great Britain Volume 1 Sevastopol 2010 February 25, 2009 PE TC «Omega» Protocol 10/27 Volume 1 Issue 1 page 2 of 95 Ф.П10.16-05 PUBLIC ENTERPRISE TESTING CENTER «OMEGA» COSPAS-SARSAT Ref.CS497/F530 21/09/1994 Certificate of Accreditation of Testing Laboratory No. АКР.0304-14 РМФ dated 06.02.2004 issued by Ministry of transport of the Russian Federation Certificate of Accreditation РОСС UA.0001.21МО98 dated 08.08.2005 issued by Federal Agency on Technical Regulating and Metrology of the Russian Federation Certificate of Accreditation of Testing Laboratory No.07.61177.184 dated 21.08.2007 issued by Russian Maritime Register of Shipping P.O.B. No.37, Sevastopol, 99053, Ukraine Phone: +380 692 240 373 Fax: +380 692 469 679 E-mail: : [email protected] Basis Contract No. 10–512/20–697 Equipment under test Emergency Position Indicating Radio Beacon (EPIRB) 406 MHz COSPAS–SARSAT Manufacturer Coverise Ltd., Great Britain, registered office 27 New Dover Road, Canterbury, Kent, CTI 3DN Applicant Coverise Ltd., Great Britain, registered office 27 New Dover Road, Canterbury, Kent, CTI 3DN Test commencement date 25.01.10 Test completion date 11.02.10 Coverise Ltd. (for submission to COSPAS-SARSAT Secretariat for consideration ) copy 1 Test reports shall be delivered to: PE TC “Omega” copy 2 The results of this report shall be applied only to the tested samples Copying or replication of this report or any part of it is prohibited without prior written permission of PE TC “Omega” PE TC «Omega» Protocol 10/27 Volume 1 Issue 1 page 3 of 95 Ф.П10.16-05 CONTENTS 1. EQUIPMENT UNDER TEST.....................................................................................................................................................4 1.1 Equipment category ...........................................................................................................................................................4 1.2 Equipment trade mark........................................................................................................................................................4 1.3 Equipment type ..................................................................................................................................................................4 1.4 Equipment model ...............................................................................................................................................................4 1.5 Equipment class .................................................................................................................................................................4 1.6 Equipment serial numbers..................................................................................................................................................4 1.7 Equipment destination .......................................................................................................................................................4 1.8 Firmware............................................................................................................................................................................4 1.9 Submitted Documentation .................................................................................................................................................5 2. TEST CONDITIONS AND METODS .......................................................................................................................................6 3. TEST PROGRAM.......................................................................................................................................................................6 4. TEST SHEDULE ........................................................................................................................................................................7 5. TEST RESULT ...........................................................................................................................................................................8 6. CONCLUSION ...........................................................................................................................................................................9 TABLE F.1: OVERALL SUMMARY OF 406 MHZ “SAFESEA E100 CLASS 2” BEACON TEST RESULTS ...........................10 ANNEX 1 ELECTRICAL AND FUNCTIONAL PERFORMANCE MEASUREMENTS AT CONSTANT TEMPERATURE ...14 ANNEX 1.1 PERFORMANCE MEASUREMENTS AT NORMAL TEMPERATURE 20 °C ..................................................16 ANNEX 1.2 PERFORMANCE MEASUREMENTS AT MAXIMUM DECLARED TEMPERATURE +55 °C ......................28 ANNEX 1.3 PERFORMANCE MEASUREMENTS AT MINIMUM DECLARED TEMPERATURE MINUS 20 °C ............40 ANNEX 2 OPERATING LIFETIME AT MINIMUM TEMPERATURE (MINUS 20 O C) ............................................................52 ANNEX 3 BEACON CODING SOFTWARE ..................................................................................................................................62 ANNEX 4 SATELLITE QUALITATIVE TEST ..............................................................................................................................80 ANNEX 4.1 TEST CONFIGURATION FOR EPIRB, BEACON SITTING ABOVE GROUND PLANE ................................81 ANNEX 5 PHOTOS OF EPIRB MODEL “SAFESEA E100 CLASS 2” .........................................................................................85 ANNEX 6 TEST EQUIPMENT USED AND TEST FACILITY ACCURACY...............................................................................95 PE TC «Omega» Protocol 10/27 Volume 1 Issue 1 page 4 of 95 Ф.П10.16-05 Introduction The test report EPIRB model SAFESEA E100 CLASS 2 consists of th…

Text truncated - open the document above for the full version.

PUBLIC ENTERPRISE TESTING CENTER «OMEGA» Approved by Acting Director Testin g center ______ Bogach. S.V. TEST REPORT No. 10/293 Issue 1 Emergency Position Indicating Radio Beacon (EPIRB) SafeSea models E100 & E100G class 1, class 2 for compliance with RTCM Standard 11000.2 (RTCM Paper 77-2002/SC110-STD, version 2.1) Manufacturer Ocean Signal Ltd., Great Britain Sevastopol 2010 November 10, 2010 PE TC «Omega» Report 10/293 Issue 1 page 2 of 179 Ф.П10.16-05 PUBLIC ENTERPRISE TESTING CENTER «OMEGA» COSPAS-SARSAT Secretariat reference No. CS497/F530 21/09/1994 US CG Letter Acceptance of Laborarory for testing EPIRB per RTCM standard 11000.2 for approvals of EPIRBs under 46 CFR 161.011 valid since February 7, 2008 National Accreditation Agency of Ukraine. Certificate of accreditation for compliance DSTU ISO 17025:2006 No. 2H339 valid until 17.05.2011 P.O.B. No.37, Sevastopol, 99053, Ukraine Phone: +380 692 240 373 Fax: +380 692 469 679 E-mail: : [email protected] Basis Contract No. 10–512/20–195 Equipment under test Emergency Position Indicating Radio Beacon (EPIRB) 406 MHz COSPAS–SARSAT Manufacturer Ocean Signal limited, Uit 4, Ocivan way, Margate, Kent, CT9 4NN, Great Britain Applicant Ocean Signal limited, Uit 4, Ocivan way, Margate, Kent, CT9 4NN, Great Britain Test commencement date 07.05.10 Test completion date 29.10.10 Ocean Signal Ltd. copy 1 Test reports shall be delivered to: PE TC “Omega” copy 2 The results of this report shall be applied only to the tested samples Copying or replication of this report or any part of it is prohibited without prior written permission of PE TC “Omega” PE TC «Omega» Report 10/293 Issue 1 page 3 of 179 Ф.П10.16-05 CONTENTS 1. EQUIPMENT UNDER TEST.....................................................................................................................................................4 2. TEST PURPOSE .........................................................................................................................................................................6 3. TEST CONDITIONS AND METHODS ....................................................................................................................................6 4. TEST PROGRAM.......................................................................................................................................................................6 5. TEST SCHEDULE......................................................................................................................................................................7 …

Text truncated - open the document above for the full version.