YBU2871X09XLow power transceiver for screen market

182032001_EN_0715 Operating instructions Keep the operating instructions in a safe place! MultiTec Touch-868 /-915 287150001 | 287160001 | 287170001 2 | EN Ⓒ elero GmbH Ⓒ elero GmbH EN | 3 Contents 1 General 7 1.1 Notes on the Operating Instructions 7 1.2 Standards and Directives 7 1.3 Intended use 8 1.4 Foreseeable misuse 8 1.5 Warranty and liability 9 1.6 Customer service of the manufacturer 9 2 Safety 10 2.1 General safety instructions 10 2.2 Safety principles 10 2.3 General operational regulations 11 2.4 Requirements for the personnel 12 2.5 Safety instructions for technical condition 12 2.6 Safety instructions for operation 13 3 Product description 13 3.1 Power supply and commissioning 15 3.2 Operation 16 3.3 Operating Principle 17 3.4 Bidirectional Radio System and Routing 17 3.5 Menu Guidance 18 3.6 Settings → Channels → Channel → Administration 27 3.7 Settings → Channels → Channel → Programs 29 3.8 Settings → Channels → Channel → Program channel 30 3.9 Settings → Channels → Channel → Configuration 31 Translation from the original German version. All other documents in different languages are translations of the original version. All rights reserved in the event of registration of patents, working models or design patents. 4 | EN Ⓒ elero GmbH Ⓒ elero GmbH EN | 5 3.10 Settings → Channels → Channel → Delete channel 33 3.11 Settings → Channels → Channel → Activate programming mode 33 3.12 Settings → Central channel 34 3.13 Settings → Product info 37 4 First programming of the transmitter in a channel 39 4.1 Program further transmitters into a channel. 41 4.2 Stopping programming mode (bidirectional) in the transmitter 42 4.3 Approaching limit positions of roller shutter / awning / Venetian blind 43 4.4 Operation of the MultiTec Touch-868 /-915 with Com- bio JA Pulse 45 4.5 Moving to intermediate position / ventilation position / turning position 46 4.6 Delete transmitter channel in the receiver or Delete all transmitters in the receiver 47 5 Specifications 47 6 Cleaning and maintaining the device 48 7 Certification 49 7.1 EC Declaration of Conformity 49 7.2 Certification FCC / IC 49 8 Troubleshooting 50 9 Repair 51 10 Manufacturer's address 51 11 Disposal / notes on environmental protection 52 1 General 1.1 Notes on the Operating Instructions The content structure is based on the radio wall transmitter MultiTec Touch-868 /-915 (hereinafter referred to as "Device"). The manufacturer reserves the right to make changes to the Specifications stated in these Operating Instructions at any time. These may, in individual cases, be different from the respective device version, however the functional informa- tion will not undergo significant changes or become invalid. The current version of the Specifications may be requested from the manufacturer at any time. No claims may be as- serted against the manufacturer as a result of the preceding sentence. Deviations from text or picture statements are possible and depend on the technical development, fea- tures, and accessories of the device. Deviating information on special versions will be explained by the manufacturer in the sales documentation. Other information shall remain unaffected by these provisions. 1.2 Standards and Directives During the design process, the basic health and safety re- quirements of the applicable laws, Standards and Directives were complied with. The safety is confirmed by the declara- tion of conformity (see Chapter 7, Declaration of Conform- ity). All safety information in these Operating Instructions refer to the laws and regulations currently applicable in Germany. All instructions in the Operating Instructions shall be observed without limitation and at any time. Beside the safety instructions contained in these Operating Instruc- tions, the provisions for accident prevention, environmental protection and occupational safety, which are applicable for 6 | EN Ⓒ elero GmbH Ⓒ elero GmbH EN | 7 the operating site, must be observed. Provisions and Stand- ards for the safety rating can be found in the EC Declaration of Conformity 1.3 Intended use The device is intended to be used in a domestic distribu- tion environment (to control electrically driven shutters, sunblinds, sunshades, roller blinds, electrical lighting and heating equipment). It is a multi-channel radio wall transmit- ter. Further fields of application have to be arranged with the manufacturer, elero GmbH Antriebstechnik (see Chap- ter 10, Manufacturer's Address). The operator will be solely responsible for damages result- ing from improper use of the device. The manufacturer can- not be held liable for personal or material damages caused by misuse or procedural errors, and by improper operation and commissioning. Only if used according to the specifications of these operat- ing instructions the safe and proper use and safe operation of the device are guaranteed. 1.4 Foreseeable misuse A use which deviates from the intended use stated by the manufacturer, elero GmbH Antriebstechnik (for address, see Chapter 10, Manufacturer's Address), is deemed fore- seeable misuse. 1.5 Warranty and liability Principally, the General Terms and Conditions of the manu- facturer, elero GmbH Antriebstechnik (see Chapter 10, Manufacturer's Address for address), apply. The terms and conditions are part of the sales documents and handed over to the operator upon delivery. Liability claims for personal or material damages are excluded when they can be attributed to one or more of the following causes: ‰Customer has opened the device (seal is broken) ‰Unintended use of the device ‰Improper installation, commissioning, or operation of the device ‰Structural modifications to the device without the written consent of the manufacturer ‰Operation of the device with improperly installed con- nections, defective safety devices or improperly installed safeguards ‰Non-observance of the safety provisions and instructions of these Operating Instructions ‰Exceeding of the technical data indic…

Text truncated - open the document above for the full version.

020415 – 08 Request for Confidentiality Date: _11 h September 2015_______ Subject: Confidentiality Request for: ______ YBU2871X09X ______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 6.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* 3 User’s Manual ______elero GmbH Antriebstechnik ______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___180___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: _________________ ___Mr. Karsten Fess____________________ (Signature/Title 3 ) (Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section V regarding EXCEPTIONAL CIRCUMSTANCES. As of the October 2014 version of this document, TCB’s can not authorize these requests. The applicant should petition the FCC by submitting an inquiry as directed. A copy of this inquiry and the FCC’s response must be provided with the application. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID: YBU2871X09X Elero – Model: MULTITEC External Photos

FCC ID: YBU2871X09X Elero – Model: MULTITEC Label

FCC ID: YBU2871X09X Elero – Model: MULTITEC Internal Photos

FCC test report Notice: The result of tests and checks reported in this Test Report refer exclusively to the samples tested and described in the Report itself. This report shall not be reproduced partially or in its entirely without written approval of Nice S.p.A. Report nr. 21416FCC15 page 1 / 52 date: 18 November 2015 Nice S.p.A. Oderzo TV Italia tel. +39.0422.853838 www.niceforyou.com Test report nr. 21416FCC15 Measurements performed in accordance with: FCC Rules: code of Federal Regulations (CFR) no. 47 PART 15 – RADIO FREQUENCY DEVICES Product: Transceiver Tested model: MULTITEC FCC ID YBU2871X09X Applicant: elero gmbh Antriebstechnik Linsenhofer Str. 59-63 D-72660 Beuren Manufacturer: elero gmbh Antriebstechnik Linsenhofer Str. 59-63 D-72660 Beuren Trademark: elero Testing Laboratory Nice S.p.A. Via Pezza Alta, 13 I-31046 Rustignè di Oderzo (TV) Registration number: 771316 Date of receipt sample: 10 th March 2015 Testing date: 16 th March – 10 th June 2015 14 th September – 15 th September Issue date: 18 November 2015 Tested by: L. Pastres Checked by: E. Campion FCC test report Report nr. 21416FCC15 page 2 / 52 date: 18 November 2015 Nice S.p.A. Oderzo TV Italia tel. +39.0422.853838 www.niceforyou.com Contents Contents ............................................................................................................................. 2 1 General Description of Equipment under Test ............................................................. 3 1.1 Applicant .................................................................................................................... 3 1.2 Manufacturer .............................................................................................................. 3 1.3 Equipment classification ............................................................................................. 3 1.4 Basic Description of equipment under test ................................................................. 4 1.5 Feature of equipment under test ................................................................................ 5 2 Test configuration of equipment under test ................................................................. 6 2.1 Environmental conditions ........................................................................................... 6 2.2 Description of support equipment............................................................................... 6 2.3 Interface identification and connection diagram of test system .................................. 7 3 Operation of equipment under test ............................................................................... 8 3.1 Operating test conditions ........................................................................................... 8 4 Tests identification and result ....................................................................................... 9 4.1 Methods of measurement .......................................................................................... 9 4.2 Frequency range investigated .................................................................................... 9 5 Tests .............................................................................................................................. 10 5.1 Antenna requirements .............................................................................................. 10 5.2 Conduced emission .................................................................................................. 11 5.3 Radiated emission .................................................................................................... 14 5.4 Timing of the transmitter .......................................................................................... 22 5.5 Transmit behaviour after releasing the TX-button .................................................... 26 5.6 Radiated output power ............................................................................................. 27 5.8 Compliance with the limit of FCC ............................................................................. 33 5.9 Spurious emission - radiated .................................................................................... 34 5.10 Occuped bandwith ................................................................................................... 36 6 Measurement and Test Equipment instrumentation.................................................. 39 7 Photographic Documentation ...................................................................................... 43 8.1 EUT Identification ..................................................................................................... 43 8.2 Test Set-up .............................................................................................................. 47 Annex 1 ............................................................................................................................. 51 Annex 2 ............................................................................................................................. 52 FCC test report Report nr. 21416FCC15 page 3 / 52 date: 18 November 2015 Nice S.p.A. Oderzo TV Italia tel. +39.0422.853838 www.niceforyou.com 1 General Description of Equipment under Test 1.1 Applicant Name: elero gmbh Antriebstechnik Address: Linsenhofer Str. 65 D-72660 Beuren Country: GERMANY 1.2 Manufacturer Name: elero gmbh Antriebstechnik Address: Linsenhofer Str. 65 D-72660 Beuren Country: GERMANY 1.3 Equipment classification According to definition 15.3 (o) is a intentional Radiator operating within the Frequencies: so it shall fulfil provisions of 47CFR Part 15 Subpart C – international radiators – and Section 15.209. According to definition 15.3 (z) is a unintentional Radiator: So it shall fulfil provisions of 47CFR Part 15 Subpart B – Unintentional radiator and section 15.249. FCC test report Report nr. 21416FCC15 page 4 / 52 …

Text truncated - open the document above for the full version.

FCC ID: YBU2871X09X Elero – Model: MULTITEC Conduced Measurements Test Set-up Radiated Measurements Test Set-up