QISE2010HSPA USB Modem

Thank you for choosing the Mobile Broadband USB Modem. With your USB Modem, you can access a wireless network at high speed. Note: This manual describes the appearance of the USB Modem, as well as the procedures for preparation, installation, and removal. For operation details about the management program, see the online help included in the management program. Getting to Know Your USB Modem The following figure shows the appearance of the USB Modem. It is provided only for your reference. The actual product may be different. 1 2 3 4 5 6 7 n Strap Hole You can tie a strap to the USB Modem through the strap hole. o Push Button You can press this push button to open the USB Modem Cover. p Indicator It indicates the status of the USB Modem. z Green, blinking twice every 3s: The USB Modem is powered on. z Green, blinking once every 3s: The USB Modem is registering with a 2G network. z Blue, blinking once every 3s: The USB Modem is registering with a 3G/3G+ network. z Green, solid: The USB Modem is connected to a 2G network. z Blue, solid: The USB Modem is connected to a 3G network. z Cyan, solid: The USB Modem is connected to a 3G+ network. z Off: The USB Modem is removed. q Bolt It holds the USB Connector when the USB Modem Cover is closed. r USB Connector It connects the USB Modem to a PC. s SIM/USIM Card Slot It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM) card. t MicroSD Card Slot It holds a microSD card. Getting Your USB Modem Ready 1. Press the push button and then open the USB Modem cover. 2. Insert the SIM/USIM card and the microSD card into the corresponding card slots, as shown in the following figure. 3. Replace the USB Modem cover. Note: z The microSD card is an optional accessory. If it is not provided in the package, you can buy one yourself. z Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of the SIM/USIM card slot and the microSD card is inserted according to the direction as labeled on the microSD card slot. z Do not remove the microSD or SIM/USIM card when the card is in use. Otherwise, the card as well as your USB Modem may get damaged and the data stored on the card may be corrupted. Installation/Removal Guide The procedure for installing the management program depends on the operating system (OS) installed on your PC. The following sections take Windows XP as an example. Connecting the USB Modem to a PC Plug the USB Modem into the USB port of your PC. Installing the USB Modem Management Program 1. Connect the USB Modem with the PC. 2. The OS automatically detects and recognizes the new hardware and starts the installation wizard. Note: If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then double-click AutoRun.exe to run the program. 3. Follow the on-screen instructions of the installation wizard. 4. After the program is installed, a shortcut icon for the management program appears on the desktop. Starting the Management Program After being installed, the management program starts automatically. Then every time the USB Modem is connected to the PC, the management program starts automatically. You can also double-click the shortcut icon on the desktop to start the management program. Removing the USB Modem 1. Double-click in the notification area. Then the Unplug or Eject Hardware dialog box appears. 2. Select the corresponding hardware and then click Stop. 3. When the message "It is safe to remove the device" appears, remove the USB Modem. Uninstalling the Management Program 1. Choose Start > Control Panel > Add or Remove Programs. 2. Find the management program and click Remove to uninstall the management program. Note: Exit the management program before uninstalling it. Version: V100R001_01 Part Number: 3101****

Copyright © Huawei Technologies Co., Ltd. 2009. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network operators or network service providers, thus the descriptions herein may not exactly match the product or its accessories you purchase. Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation. NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS. Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein. Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use your device safely. Read this information carefully before using the device. Electronic Device Do not use your device if using the device is prohibited. Do not use the device when using the device causes danger or interference with electronic devices. Medical Device z Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device when using the device is prohibited. z Some wireless devices may affect the performance of hearing aids or pacemakers. For any such problems, consult your service provider. z If you are using an electronic medical device, consult the doctor or the device manufacturer to confirm whether radio waves affect the operation of this device. Potentially Explosive Atmosphere Do not use your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, resulting in bodily injuries or even deaths. Do not use your device at refueling points such as service stations. Comply with restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere to restrictions in areas where blasting operations are in progress. Before using the device, watch out for areas that have potentially explosive atmospheres that are often, but not always, clearly marked. Such locations include areas below the deck on boats, chemical transfer or storage facilities, and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) whether this device can be safely used in their vicinity. Traffic Security z Observe local laws and regulations while using the device. To prevent accidents, do not use your wireless device while driving. z RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. z In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates. z Do not use your device while flying in an aircraft and before boarding an aircraft. Using wireless devices in an aircraft may cause danger to the operation of the aircraft and disrupt the wireless telephone network. It may also be considered illegal. Operating Environment z Do not use the device in dusty, damp, and dirty places or places with magnetic fields. Otherwise, it may result in malfunction of the circuit. z On a stormy day with thunder, do not use your device when it is being charged, to prevent any danger caused by lightning. z While using the device, observe the local laws and regulations, and respect others' privacy and legal rights. Safety of Children Comply with all precautions with regard to children's safety. Letting the child play with your device or its accessories, which may include parts that can be detached from the device, may be dangerous, as it may present a choking hazard. Ensure that small children are kept away from the device and accessories. Accessories Use the accessories delivered only by the manufacturer. Using accessories of other manufacturers or vendors with this device model may invalidate any approval or warranty applicable to the device, result in the non-operation of the d…

Text truncated - open the document above for the full version.

Huawei Technologies Co., Ltd. Address：Huawei Industrial Base,Bantian Longgang,Shenzhen 518129, P.R China Post ZIP：518129 Page ：1/1 To: CETECOM Fax : NULL From:Zhang Xinghai Fax:0086-755-89652518 Tel:0086-755-89651014 Email address: [email protected] Http: www.huawei.com Subject：Letter of Confidentiality Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with the Code of Federal Regulations Title 47 Section 0.457 and 0.459 pertaining to confidential material. Huawei Technologies Co., Ltd. would like the following documents regarding this submission for FCC ID: QISE2010 to be kept confidential: 1. Schematic diagram . 2. Block Diagram. 3. Parts list (BOM) Information. 4. Operational description. 5. Tune-up procedure The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, For and Behalf of: Huawei Technologies Co., Ltd. Zhang Xinghai EMC Laboratory Manager

Huawei Technologies Co., Ltd. Administration Building, Huawei Base, Bantian, Longgang District, Shenzhen 518129 P.R.C. +86 755 28780808 www.huawei.com Huawei internal reference RCT-US-01-01 USA FCC Short Term Confidentiality Request template Effective date: 2007-01-06 Version 1.1 Short Term Confidentiality Request 2010-03-26 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality Request for FCC ID: QISE2010 Product Name: HSPA USB Modem Product Model: E2010 To whom maybe concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, Huawei Technologies Co., Ltd requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 90 days: 1. External Photos 2. Internal Photos 3. Test Setup Photos 4. Users Manual The applicant also acknowledges that they will also provide appropriate notice to CETECOM should either of the following occur: A) If the applicant requires additional 45 day extension periods they will notify CETECOM with a new request letter at least 7 days prior to the short-term confidentiality expiration date-[Note: up to maximum of 3 extensions only are allowed], or b) Immediately notify CETECOM in the event the information regarding the product of the product is made available to the public CETECOM will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705.

E2010 SECRET Page1,Total 4 External Photos of E2010 E2010 SECRET Page2,Total 4 E2010 SECRET Page3,Total 4 E2010 SECRET Page4,Total 4

E2010 SECRET Page1, Total 1 ID Label Location E2010

E2010 SECRET Page1, Total 1 ID Label E2010

E2010 SECRET Page1,Total6 Internal Photos of E2010 E2010 SECRET Page2,Total6 E2010 SECRET Page3,Total6 E2010 SECRET Page4,Total6 E2010 SECRET Page5,Total6 E2010 SECRET Page6,Total6

Report No.: RZA2010-0253 TESTING No. L2264 OET 65 TEST REPORT Product Name HSPA USB Modem Model E2010 FCC ID QISE2010 Client HUAWEI Technologies Co., Ltd. TA Technology (Shanghai) Co., Ltd. GENERAL SUMMARY Product Name HSPA USB Modem Model E2010 FCC ID QISE2010 Report No. RZA2010-0253 Client HUAWEI Technologies Co., Ltd. Manufacturer HAUWEI Technologies Co., Ltd. Standard(s) IEEE Std C95.1, 1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 KHz to 300 GHz. Supplement C Edition 01-01 to OET Bulletin 65 Edition 97-01 June 2001 including DA 02-1438, published June 2002: Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields Additional Information for Evaluation Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions. IEC 62209-2 Ed.1(2008-10): Human exposure to radio frequency fields from handheld and body-mounted wireless communication devices – Human models, instrumentation, and procedures –Part 2: Procedure to determine the Specific Absorption Rate (SAR)for wireless communication devices used in close proximity to the human body-(frequency rang of 30MHz to 6GHz ). Conclusion Localized Specific Absorption Rate (SAR) of this portable wireless equipment has been measured in all cases requested by the relevant standards cited in Clause 5.2 of this test report. Maximum localized SAR is below exposure limits specified in the relevant standards cited in Clause 5.1 of this test report. General Judgment: Pass (Stamp) Date of issue: March 19 th , 2010 Comment The test result only responds to the measured sample. Approved by Yang Weizhong Revised by Ling Minbao Performed by Li Jinchang TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 3 of 138 TABLE OF CONTENT 1. General Information ..................................................................................................................... 5 1.1. Notes of the test report......................................................................................................... 5 1.2. Testing laboratory ................................................................................................................. 5 1.3. Applicant Information ............................................................................................................ 6 1.4. Manufacturer Information ...................................................................................................... 6 1.5. Information of EUT................................................................................................................ 7 1.6. Test Period ........................................................................................................................... 8 2. Operational Conditions Test ......................................................................................................... 9 2.1. General description of test procedures ................................................................................. 9 2.2. GSM Test Configuration ........................................................................................................ 9 2.3. WCDMA Test Configuration ................................................................................................ 10 2.4. HSDPA Test Configuration .................................................................................................. 10 2.5. HSUPA Test Configuration .................................................................................................. 13 2.6. Position of module in Portable devices ............................................................................... 15 2.7. Picture of host product ........................................................................................................16 3. SAR Measurements System Configuration ................................................................................ 17 3.1. SAR Measurement Set-up .................................................................................................. 17 3.2. DASY4 E-field Probe System ............................................................................................. 18 1.1.1. EX3DV4 Probe Specification ............................................................................................... 18 3.2.1. E-field Probe Calibration ......................................................................................................19 3.3. Other Test Equipment .........................................................................................................19 3.3.1. Device Holder for Transmitters ............................................................................................ 19 3.3.2. Phantom ............................................................................................................................... 20 3.4. Scanning procedure............................................................................................................ 20 3.5. Data Storage and Evaluation .............................................................................................. 22 3.5.1. Data Storage ........................................................................................................................ 22 3.5.2. Data Evaluation by SEMCAD............................................................................................... 22 3.6. System check...................................................................................................................... 25 3.7. Equivalent Tissues ..............................................................................................................26 4. Laboratory Environment............................................................................................................. 26 5. Characteristics of the Test .................................................…

Text truncated - open the document above for the full version.

TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 101 of 138 WCDMA Band V with Lenovo Y-450 Test Position 7 Middle Date/Time: 3/17/2010 6:38:20 PM Communication System: WCDMA Band V; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 1.03 mho/m; ε r = 54; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn871; Calibrated: 11/11/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Test Position 7 Middle/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.443 mW/g Test Position 7 Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.9 V/m; Power Drift = 0.117 dB Peak SAR (extrapolated) = 0.660 W/kg SAR(1 g) = 0.400 mW/g; SAR(10 g) = 0.234 mW/g Maximum value of SAR (measured) = 0.445 mW/g Figure 57 WCDMA Band V with Lenovo Y-450 Test Position 7 Channel 4183 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 102 of 138 WCDMA Band V with Lenovo Y-450 Test Position 7 Low Date/Time: 3/17/2010 7:52:34 PM Communication System: WCDMA Band V; Frequency: 826.4 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 826.4 MHz; σ = 1.02 mho/m; ε r = 54.1; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn871; Calibrated: 11/11/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Test Position 7 Low/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.485 mW/g Test Position 7 Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.2 V/m; Power Drift = 0.014 dB Peak SAR (extrapolated) = 0.718 W/kg SAR(1 g) = 0.435 mW/g; SAR(10 g) = 0.257 mW/g Maximum value of SAR (measured) = 0.482 mW/g Figure 58 WCDMA Band V with Lenovo Y-450 Test Position 7 Channel 4132 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 103 of 138 WCDMA Band V + HSDPA with Lenovo Y-450 Test Position 7 High Date/Time: 3/17/2010 8:26:31 PM Communication System: WCDMA Band V+HSDPA; Frequency: 846.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 847 MHz; σ = 1.03 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn871; Calibrated: 11/11/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Test Position 7 High/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.451 mW/g Test Position 7 High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.2 V/m; Power Drift = 0.027 dB Peak SAR (extrapolated) = 0.672 W/kg SAR(1 g) = 0.400 mW/g; SAR(10 g) = 0.228 mW/g Maximum value of SAR (measured) = 0.447 mW/g Figure 59 WCDMA Band V+ HSDPA with Lenovo Y-450 Test Position 7 Channel 4233 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 104 of 138 WCDMA Band V + HSUPA with Lenovo Y-450 Test Position 7 High Date/Time: 3/17/2010 8:57:54 PM Communication System: WCDMA Band V+HSUPA; Frequency: 846.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 847 MHz; σ = 1.03 mho/m; ε r = 53.9; ρ = 1000 kg/m 3 Ambient Temperature:22.3 °C Liqiud Temperature: 21.5°C DASY4 Configuration: Probe: EX3DV4 - SN3677; ConvF(9.11, 9.11, 9.11); Calibrated: 9/23/2009 Electronics: DAE4 Sn871; Calibrated: 11/11/2009 Phantom: SAM 12; Type: SAM V4.0; Serial: TP-1246 Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Test Position 7 High/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.344 mW/g Test Position 7 High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.5 V/m; Power Drift = -0.187 dB Peak SAR (extrapolated) = 0.500 W/kg SAR(1 g) = 0.297 mW/g; SAR(10 g) = 0.170 mW/g Maximum value of SAR (measured) = 0.332 mW/g Figure 60 WCDMA Band V+ HSUPA with Lenovo Y-450 Test Position 7 Channel 4233 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 105 of 138 ANNEX D: Probe Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 106 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 107 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 108 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 109 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 110 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 111 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 112 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 113 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 114 of 138 ANNEX E: D835V2 Dipole Calibration Certificate TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 115 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 116 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 117 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 118 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 119 of 138 TA Technology (Shanghai) Co., Ltd. Test Report Report No. RZA2010-0253 Page 120 of 138 TA Technolo…

Text truncated - open the document above for the full version.

Zur optimalen Anzeige dieses PDF-Portfolios sollte es in Acrobat oder Adobe Reader ab Version 9 geöffnet werden. Adobe Reader jetzt herunterladen

FCC Test Report Product Name: HSPA USB Modem Model Number: E2010 Report No: SYBHZ(R)E057022010EB-2 FCC ID: QISE2010 Reliability Laboratory of Huawei Technologies Co., Ltd. Huawei Base, Bantian, Longgang District, Shenzhen 518129, P.R. China Tel: +86 755 28780808 Fax: +86 755 89652518 FCC Test Report of E2010 FCC ID: QISE2010 Security Level: Public Report No: SYBHZ(R)E057022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page2, Total34 Notice 1. The laboratory has obtained the accreditation of China National Accreditation Service for Conformity Assessment (CNAS), and accreditation number: L0310. 2. The laboratory has obtained the accreditation of THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION (A2LA), and Accreditation Council Certificate Number: 2174.01. 3. The laboratory has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. The site recognition number is 97456. 4. The laboratory has been listed by industry Canada to perform electromagnetic emission measurement. The site recognition number is 6369A-1. 5. The laboratory also has been listed by the VCCI to perform EMC measurements. The accreditation number is R2364, C2583, and T256. 6. The test report is invalid if not marked with "exclusive stamp for the test report". 7. The test report is invalid if not marked with the stamps or the signatures of the persons responsible for performing, revising and approving the test report. 8. The test report is invalid if there is any evidence of erasure and/or falsification. 9. If there is any dissidence for the test report, please file objection to the test centre within 15 days from the date of receiving the test report. 10. Normally, the test report is only responsible for the samples that have undergone the test. 11. Context of the test report cannot be used partially or in full for publicity and/or promotional purposes without previous written approval of the laboratory. FCC Test Report of E2010 FCC ID: QISE2010 Security Level: Public Huawei Technologies Co Ltd Huawei Industrial Base, Bantian Longgang Shenzhen 518128, P.R China Tel: +86 755 89651014 Fax: +86 755 89652518 REPORT ON FCC Test of HSPA USB Modem M/N: E2010 Report No: SYBHZ(R)E057022010EB-2 REGULATION FCC CFR47 Part 2: Subpart J; FCC CFR47 Part 22: Subpart H; CONCLUSION Pass General Manager Mar. 16, 2010 张兴海 Date Name signature Technical Responsibility For Area of Testing Mar. 16, 2010 余 辉 Date Name signature Test Lab Engineer Mar. 16, 2010 胡 俊 Date Name signature Report No: SYBHZ(R)E057022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page3, Total34 FCC Test Report of E2010 FCC ID: QISE2010 Security Level: Public Report No: SYBHZ(R)E057022010EB-2 Confidential Information of Huawei. No Distribution without Written Permission Page4, Total34 Contents 1 Summary.................................................................................................................................................... 5 2 Product Description.................................................................................................................................. 6 2.1 PRODUCTION INFORMATION................................................................................................................... 6 2.2 MODIFICATION INFORMATION.................................................................................................................. 6 3 Test Site Description................................................................................................................................. 7 3.1 TESTING PERIOD................................................................................................................................... 7 3.2 GENERAL SET UP DESCRIPTION............................................................................................................. 7 4 Product Description.................................................................................................................................. 8 4.1 TECHNICAL CHARACTERISTICS............................................................................................................... 8 4.2 EUT IDENTIFICATION LIST.................................................................................................................... 10 5 Main Test Instruments............................................................................................................................. 11 6 Transmitter Measurements..................................................................................................................... 12 6.1 EFFECTIVE RADIATED POWER OF TRANSMITTER (ERP)......................................................................... 12 6.2 CONDUCTED POWER OF TRANSMITTER............................…

Text truncated - open the document above for the full version.